3 DATA SHEET ARRAY CHIP RESISTORS YC324 (8Pin/4R Pb Free) 5%, 1% sizes 1220 Product specification Feb 22, 2005 V.1 Supersedes Date of Mar. 06, 2003 Product specification 2 8 YC SERIES 324 (Pb Free) Chip Resistor Surface Mount SCOPE This specification describes YC324 series chip resistor arrays with lead-free terminations made by thick film process. ORDERING INFORMATION Part number is identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. PPHHYYCCOOMMPP OORRDDEERRIINNGG CCOODDEE 12NC CODE CTC CODE 2350 XXX XXXXX L YC324 X X X XX XXXX L ( ) ( ) ( ) ( ) ( ) ( ) 1 2 3 4 5 6 (1) (2) (3) (4) (2) ( ) 1 TOLERANCE TYPE/ START TOL. RESISTANCE EMBOSSED TAPE ON REEL (units) (1) 1220 IN (%) RANGE 4,000 F = 1% J = 5% YC324 2350 5% 10 to 1 M 039 10xxx YC324 2350 1% 10 to 1 M 029 1xxxx ( ) 2 PACKAGING TYPE K = Embossed taping reel ( ) 3 TEMPERATURE COEFFICIENT (1) The resistors have a 12-digit Last digit of 12NC OF RESISTANCE ordering code starting with (3) Resistance decade Last digit = Base on spec 2350. X 0.01 to 0.0976 0 ( ) 4 TAPING REEL (2) The subsequent 4 or 5 digits X 0.1 to 0.976 7 indicate the resistor 07 = 7 inch dia. Reel X 1 to 9.76 8 tolerance and packaging. ( ) 5 RESISTANCE VALUE 10 to 97.6 X 9 (3) The remaining 4 or 3 digits 56R, 560R, 5K6, 56K, 1M X 100 to 976 1 represent the resistance value with the last digit indicating 1 to 9.76 kX 2 (6) RESISTOR TERMINATIONS the multiplier as shown in the X 10 to 97.6 k 3 L = Lead free terminations (pure Tin) table of Last digit of 12NC. X 100 to 976 k 4 (4) L means lead-free 1 to 9.76 MX 5 terminations. ORDERING EXAMPLE X 10 to 97.6 M 6 ORDERING EXAMPLE The ordering code of a YC324 X Example: 0.02 = 0200 or 200 convex chip resistor array, value The ordering code of a YC324 X 0.3 = 3007 or 307 1,000 X with 5% tolerance, convex chip resistor array, value X supplied in 7-inch tape reel is: 1 = 1008 or 108 1,000 X with 5% tolerance, YC324-JK-071KL. X supplied in tape of 4,000 units 33 k = 3303 or 333 per reel is: 235003910102L. X 10 M = 1006 or 106 NOTE 1. The L at the end of the code is only for ordering. On the reel label, the standard CTC or 12NC will be mentioned an additional stamp LFP= lead free production. 2. Products with lead in terminations fulfil the same requirements as mentioned in this datasheet. 3. Products with lead in terminations will be phased out in the coming months (before July 1st, 2006) www.yageo.com Feb 22, 2005 V.1