Leaded ResistoRs High Voltage & High Ohmic Type Metal Glazed Film Resistors Normal & Miniature Style HHV Series Feat URes Power Rating 1/4W, 1/2W, 1W, 2W, 3W Resistance Tolerance 1%, 5% T.C.R. 200ppm/C Flameproof Multi-layer Coating Meets UL-94V-0 Flameproof Feature Meets Overload Test UL-1412 de Rati NG CURVe iNt Rod UCtio N For resistors operated in ambient temperatures above 70C, power rating must be derated The HHV Series High Voltage & High Ohmic in accordance with the curve below. Resistors are made of metal glaze film, with tinned connecting leads of electrolytic copper 70 155 C Rated Load (%) 100 welded to the end of caps. The resistors are 80 coated with layers of pink color lacquer. 60 40 20 20 40 60 80 100 120 140 160 Ambient Temperature (C) di MeNsio Ns Unit: mm st YLe di MeNsio N Normal Miniature L d H d d HHV-25 HHV50S 6.30.5 2.40.2 282.0 0.550.05 H L D HHV-50 HHV1SS 9.00.5 3.30.3 262.0 0.550.05 HHV1WS HHV2SS 11.51.0 4.50.5 352.0 0.80.05 th color code: yellow HHV2WS HHV3SS 15.51.0 5.00.5 332.0 0.80.054 Note: eLeCt RiCa L CHa Ra Cte Risti Cs st YLe HHV-25 HHV50s HHV-50 HHV1ss HHV1Ws HHV2ss HHV2Ws HHV3ss Power Rating at 70C 1/4W 1/2W 1W 2W 3W Maximum Working Voltage (DC) 1,600V 3,500V 5,000V 7,000V Maximum Overload Voltage (DC) 3,000V 7,000V 10,000V 14,000V Voltage Proof 300V 500V 600V Resistance Range 100K - 68M for E24 & E96 series value Operating Temp. Range -55C to +155C Temperature Coefficient 200pm/C Note: Special value is available on request eNViRo NMeNta L CHa Ra Cte Risti Cs PeRFo RMa NCe test test M et Hod a PPRaise Short Time Overload IEC 60115-1 4.13 2.5 times RCWV for 5 Sec. 2.0%+0.05 Voltage Proof IEC 60115-1 4.7 in V-block for 60 Sec., test voltage by type By type Temperature Coefficient IEC 60115-1 4.8 -55C to +155C By type Insulation Resistance IEC 60115-1 4.6 in V-block for 60 Sec. >10,000M Solderability IEC 60115-1 4.17 2355C for 30.5 Sec. 95% Min. coverage No deterioration of Solvent Resistance of Marking IEC 60115-1 4.30 IPA for 50.5 Min. with ultrasonic coatings and markings Robustness of Terminations IEC 60115-1 4.16 Direct load for 10 Sec. in the direction of the terminal leads 2.5kg (24.5N) Periodic-pulse Overload IEC 60115-1 4.39 4 times RCWV 10,000 cycles (1 Sec. on, 25 Sec. off) 1.0%+0.05 Damp Heat Steady State IEC 60115-1 4.24 402C, 90-95% RH for 56 days, loaded with 0.1 times RCWV 5.0%+0.05 Endurance at 70C IEC 60115-1 4.25 702C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off) 5.0%+0.05 Temperature Cycling IEC 60115-1 4.19 -55C Room Temp. +155C Room Temp. (5 cycles) 1.0%+0.05 Resistance to Soldering Heat IEC 60115-1 4.18 2603C for 101 Sec., immersed to a point 30.5mm from the body 1.0%+0.05 No evidence of flaming Accidental Overload Test IEC 60115-1 4.26 4 times RCWV for 1 Min. or arcing Note: Rated Continuous Working Voltage (RCWV) = Power Rating x Resistance Value