Latch Header (1.27mm, Right Angle, Solder Dip) NFP SERIES ORDERING INFORMATION Characteristics NFP- A-01 2- - * *** * ** Current Rating: 0.5A Insulation Resistance: 1,000M Minimum at 500 VDC Header Series Withstanding Voltage: 500 VAC for 1 minute Contact Resistance: 15m Max. at 10mA No. of Positions Operating Temperature: -20C ~ +85C Material and Finish Standard Header Insulator: High Temp Thermoplastic-UL94V-0 Contact: Copper Alloy 1: Short Latch Plating: Mating Face Contacts: Au over Ni 2: Long Latch Terminals: Au or SnPb over Ni Terminal Type: Features 2: Right Angle Solder Dip 1. Right-angle terminals 2. Short or long latches Blank: 2.7 mm Terminal 3. Long terminal available 1: 4.6 mm Terminal 4. Variety of plating options 5. Latches eject receptacle Plating (see below) 6. Central polarizing key TYPES OF PLATING CONNECTOR DIMENSIONS (reference only) q Short Latch Positions 50, 60, 64, 80,100 available in long terminals Long Latch Positions 40, 64, 80, 100 available in long terminals 54NF Connectors Latch Header (1.27mm, Right Angle, Solder Dip) NFP SERIES APPLICABLE DIMENSIONS (reference only) Connector Outline Dimensions Contact Detail X= 6.5 (Short latch type) 4.0 (Long latch type) Y= 2.7 (Short terminal length) 4.6 (Long terminal length) PCB Layout Section A Section B Note: Left half of this PCB layout is identical to Section A 16, 20, 40, 60, 64, 80, 100 Contacts 10, 26, 34, 50 Contacts 55