X-On Electronics has gained recognition as a prominent supplier of CTW-01 Air Quality Sensors across the USA, India, Europe, Australia, and various other global locations. CTW-01 Air Quality Sensors are a product manufactured by Zamel. We provide cost-effective solutions for Air Quality Sensors, ensuring timely deliveries around the world.

CTW-01 Zamel

CTW-01 electronic component of Zamel
Product Image X-ON
Product Image X-ON
Product Image X-ON

Images are for reference only
See Product Specifications
Part No.CTW-01
Manufacturer: Zamel
Category: Air Quality Sensors
Description: Sensor: gas; electrochemical; CO; 0÷40°C; 33x110x35mm; 20mA; IP20
Datasheet: CTW-01 Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)
1: USD 24.1521 ea
Line Total: USD 24.15 
Availability - 0
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0
Ship by Tue. 26 Nov to Thu. 28 Nov
MOQ : 1
Multiples : 1
1 : USD 24.1521

   
Manufacturer
Product Category
Detected Gas
Ip Rating
Power Supply
Mounting
Kind Of Sensor
Additional Functions
Conform To The Norm
Type Of Sensor
Protection Class
Operating Temperature
Sound Level
Body Dimensions
Supply Current
LoadingGif
 
Notes:- Show Stocked Products With Similar Attributes.

We are delighted to provide the CTW-01 from our Air Quality Sensors category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the CTW-01 and other electronic components in the Air Quality Sensors category and beyond.

Image Part-Description
Stock Image MCR-02
Module: microwave motion detector; 900mW; Detection: circle Ø10m
Stock : 11
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image ASH-01
Staircase timer; IP20; 230VAC; SPST-NO; wall mount; Ioper.max:16A
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image ASN-02
Staircase timer; IP20; 230VAC; SPST-NO; wall mount; 16A; -20÷45°C
Stock : 3
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image SOH-05
Probe light; Works with: WZM-01,WZM-02,WZN-01; 5m
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image ASM-02/24V
Staircase timer; IP20; 24VAC; 24VDC; SPST-NO; DIN; 16A; -20÷45°C
Stock : 9
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image MCR-01
Module: microwave motion detector; 900mW; Detection: circle Ø10m
Stock : 9
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image SOS-01
Probe light; IP54; Works with: WZM-01,WZM-02,WZN-01; -20÷45°C
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image SZH-03
Flood sensor; Works with: PZM-10; 3m
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PEP-01/012
Relay; IP20; 12VAC; 12VDC; 47.5x47.5x20mm; flush mount; -10÷55°C
Stock : 6
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image CAM-10
Module: voltage monitoring relay; DIN; Leads: screw terminals
Stock : 3
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Image Part-Description
Stock Image MR003-005.1
Sensor: humidity sensor; Interface: analog
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image GMS10RVS
Air Quality Sensors OXYGEN SENSOR 4V 40UA
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image MAGNETIC SWITCH
Sensor: magnetic field; switch; 4.75÷5.25VDC; IC: CT10; Grove
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image OKY3334
Sensor: gas level; 5VDC; MQ-7; CO; Resolution:10÷1000ppm
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image EC4-1000-H2S
Air Quality Sensors 4 series H2S gas sensor 1000ppm
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image OKY3072-1
Sensor: atmospheric; temperature, humidity; digital; 5VDC
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image OKY3339
Sensor: air quality; 5VDC; MQ-135; alcohol, benzene, smoke
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image T5100-V
Air Quality Sensors Wallmount CO2 Sensor
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image USEQGCCACH4100
Air Quality Sensors Gas Detector Sensor Analog TO-39
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image SGX-7H2S-200
Air Quality Sensors 7 Series H2S sensor fixed apps-100ppm
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.

plik: newCTW-01 en modyfikacja: 20.10.2016 Tested in Poland Efficiency Certificate WARRANTY CARD 1. ZAMEL provides a two-year warranty for its products. There is 24 months guarantee on the product 2. The ZAMEL warranty does not cover: CARBON MONOXIDE DETECTOR a) mechanical defects resulting from transport, loading / unloading or other circumstances b) defects resulting from incorrect installation or operation of ZAMEL products c) defects resulting from any changes made by CUSTOMERS or third parties, to products sold or equipment necessary for the correct operation of products sold d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable e) power supply (batteries) to be equipped with a device in the moment of sale (if they appear) CTW-01 3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect. 4. ZAMEL will review complaints in accordance with existing regulations. 5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL. 6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy between the goods and the contract. Salesman stamp and signature, date of sale ZAMEL Sp. z o.o. 43-200 Pszczyna, ul. Zielona 27, tel.: (32) 210 46 65 fax: (32) 210 80 04 e-mail: marketing zamel.pl, www.zamel.com CTW-01 CARBON MONOXIDE DETECTOR Carbon monoxide, commonly referred to as coal smoke, is a highly toxic, colourless and odourless gas easily spreading in the air. It is produced in the process of an incomplete combustion of many fuels such as wood, fuel oil, gas, gasoline, kerosene, propane, coal and oil. Since the gas is colourless and odourless, that is why it is so important to detect earlier the dangerous concentration of coal smoke in a room we usually stay in. It is hard to specify the dangerous value of the carbon monoxide level as it is dependent on the length of time someone spent in this particular room. The standard defines that a detector should activate an alarm in less than 3 minutes if the carbon monoxide concentration is at a level of 300 ppm. FEATURES: tested in Poland, certificate of a proper concentration detection 300ppm in less than 3 minutes electro-chemical type of sensor LCD screen showing the current concentration of carbon monoxide fumes and information messages battery powered optical signalling sound signalling (85 dB) battery discharge signalling Tested in sensor failure signalling Poland Efficiency Certificate Before sensor mounting, first read the manual instruction included in the packaging. Power: 3 x battery 1.5 V type AA IP20 Product net weight: 0.117 kg The symbol means selective collecting of electrical and electronic equipment. It is forbidden to put the used equipment together with other waste. Made in PRC for Zamel Sp. z o.o. Declaration of Conformity on the website www.zamel.com www.zamel.com newCTW-01 en.indd 2-3 20.10.2016 08:33 Battery powered LCD display Alarm volume: 85 db Tested in PolandTECHNICAL DATA Power supply voltage: 3 x battery 1.5 V type: AA Sensor type: electrochemical Current consumption during stand-by mode: 20 mA Current consumption during alarm: 30 mA Sound level: 85 dB power Optical signalling of alarm CO level displayed on the LCD screen alarm Certified detection sensitivity of carbon monoxide: 300 ppm in less than 3 minutes Protection class III IP protection degree: IP 20 fault Operating temperature range: from 0 C do 40 C Humidity operating range: from 20 % to 90 % RH Dimensions mm : 33 x 110 x 35 MOUNTING Detectors should be mounted mainly near places particularly exposed to the presence of carbon monoxide, which is produced due to the test key combustion of fuels such as: gas, wood, coal. In order to avoid false alarms it is recommended to keep a 2 meter distance from the possible carbon monoxide sources. Sensors should be mounted at a height of 150 cm from the ground. In order to provide an optimum protection, sensors should be also mounted in closed rooms where the household members stay for a longer time, e.g. especially in bedrooms. In multi-storey buildings it is advised to mount at least one sensor per each floor. Detectors should not be installed both in the so called blind spaces (e.g. a niche covered by furniture or curtains or in the gable of the roof, etc.) and in places where their operation will be affected by the direct supply of fresh air (e.g. near doors, windows, ventilation grilles, fans). Also, these devices should not be placed in areas exposed to dust, dirt, aerosols and household chemicals that can permanently damage the detector. Carbon monoxide, commonly referred to as coal smoke, is a highly toxic, colourless and odourless gas easily spreading in the air. It is produced in the process of an incomplete combustion of many fuels such as wood, fuel oil, gas, gasoline, kerosene, propane, coal and oil. In order to mount the device it is required to: Incomplete combustion is caused by a lower oxygen level necessary for a complete combustion. The above may be due to a lack of fresh remove the back cover in the counter-clockwise direction to release the clips (external) air supply to the device where the combustion takes place or due to contamination, usage or improper adjustment of the gas check if the batteries are properly mounted, in case mount new ones (3 batteries AA type) burner or too early closure of the fire box or oven. The following can also be the causes of carbon monoxide accumulation: clogged chim - screw the back cover to the wall by means of the attached screws and mount the device on it by turning it in the clockwise direction until neys and clogged ventilation ducts. The above is especially dangerous in homes where windows are tightly closed or sealed for winter. The you can hear a click danger of asphyxiation is due to the fact that carbon monoxide is an undetectable gas to humans because it is colourless and odourless. It enters the body through the respiratory system and next it is absorbed into the bloodstream. In the humans respiratory system, carbon monoxide is assimilated with haemoglobin 210 times faster than oxygen blocking the flow of oxygen to the body. The above results in a serious threat to human health and life. It prevents the proper distribution of oxygen in the blood and causes damage to brain and other organs. The consequence of an acute poisoning can be an irreversible damage to the central nervous system, coronary insufficiency, heart attack or even death. That is why, it is so important to mount carbon monoxide detectors in lodgings, to control regularly carbon monoxide generating equipment (stoves, boilers, gas water heaters, etc.) and to control ventilation ducts. In case of an alarm it is required to: Ventilate the particular room by opening the windows and doors immediately leave the room, although the alarm is switched off, it is important to define the cause of its occurrence by controlling the condition and the flow of ventilating ducts, the condition of the heating units and eventually notify the relevant services (e.g. fire-brigade, gas-works), in case any of the household members has a poisoning symptom (headaches and dizziness, nausea) it is required to immediately FUNCTIONS notify the ambulance. First activation After batteries are properly mounted, the device switches on the LCD screen, the red LED and emits a single sound signal. Next press the TEST button to activate the testing procedure. In case the test has been successful, the device switches off the LCD screen and switches to the operation mode that is signalled every 10 seconds by the green LED flash. Maintenance and usage remarks Test procedure After pressing the TEST button, the device performs the test procedure by checking the sensors efficiency. The display shows 000 and every 5 seconds a repeated sound signal is emitted and the red LED remains switched on. After 30 seconds the device should return to Clean the device regularly, keep clean the sensors air inlet - mount the device in places meeting the requirements regarding the operation mode signalled by switching off the LCD screen and a flashing green LED (every 10 seconds). It means the test procedure temperature and humidity, has been successful. Device testing is recommended at least once a month. do not cover the device with paint while painting the room, Alarm do not spray the cleaners directly on the device, If a sensor detects a dangerous carbon monoxide level, it will automatically switch on the LCD screen showing the carbon monoxide level and will emit a sound alarm every 5 seconds, whereas the red LED will flash. In case an alarm occurs, it is required to ventilate do not allow to flood the sensor, immediately the particular room and to leave it at once. It is also important to notify the relevant services to check the cause of excessive mount the sensor according to the requirements, concentration of carbon monoxide. it is absolutely required to replace the sensor in case the sensors end of life. Mute alarm function In case the alarm is activated, press the TEST button to mute the sound signal for a few minutes. If the dangerous carbon monoxide level is still so high, the alarm will be activated again. Battery discharge signalling In case the battery charge level is low the display shows the following message Lb and starts emitting a single sound signal with a flashing red LED every 20 seconds. It is required to change the battery immediately. It is important to take into account that carbon monoxide sensors perfectly raise the protection of Device failure signalling. household members, but they do not provide 100% certainty of carbon monoxide fumes detection due The device is equipped with an auto-diagnostic system, which shows Err on the LCD screen in case of a sensor failure occurrence. to a possibility of a device failure, battery discharge and the impact of external factors on the sensor. Additionally, a double sound signal is emitted and the yellow LED starts flashing. The alarm is repeated every 5 seconds. The device failure requires its user to contact the service. Therefore, it is required to systematically test the sensors efficiency (in accordance with this manual Signalling the electro-chemical sensors end of life instruction) and the heating units (stoves, cookers) to minimize the risk of occurrence of a dangerous After the lifetime of an electrochemical sensor is exceeded, the display shows End and, additionally, a triple sound signal is emitted carbon monoxide level in the air. every 50 seconds with a flashing yellow LED. This means the end of life of the sensor and the necessity to replace it with a new one. Before mounting the sensor, read this manual instruction first. newCTW-01 en.indd 4-5 20.10.2016 08:33

Tariff Desc

8543.70.00 - Other machines and apparatus Free
13 No Signal processors (graphic equalisers, crossovers etc.)
91 .. Other

9027.10.00 Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes.

9031.80.00 - MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS Other instruments, appliances and machines Free
MOSFET Gate Driver Circuits: The Brains Behind the Powerhouse image

Jul 16, 2024
In the realm of power electronics, where hefty currents flow and voltages command respect, the humble MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) reigns supreme as a power switching device. But to effectively control this electronic powerhouse, a specialized circuit steps in – the MOS
Best Retailer of B3F-3152 Tactile Switches in USA, Australia, India image

Aug 27, 2024
The B3F-3152 is a compact, reliable tactile switch manufactured by Omron, ideal for applications requiring precise actuation. With a 6x6 mm footprint and 6.15 mm height, it is perfect for space-constrained designs in consumer electronics, automotive controls, and industrial equipment. Xon Electroni
Difference Between Fuses and Breakers: A Comprehensive Guide image

Aug 13, 2024
Discover the key differences between fuses and circuit breakers in this comprehensive guide. Learn about their types, working principles, advantages, and disadvantages. Understand how to choose the right overcurrent protection device for your needs, whether for residential, commercial, or industria
156-3009-EX D-Sub Backshells Retailer in USA image

Sep 6, 2024
Xon Electronic is the leading global retailer of the 156-3009-EX D-Sub Backshell, manufactured by Kobiconn. Designed for 9-pin D-Sub connectors, this metallized backshell provides superior EMI/RFI shielding, ensuring reliable performance in industrial, medical, and telecommunications applications.

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON Electronics
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronics Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing. All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted AS9120 Certified