POWER SUPPLY INDICATOR LKM-03 INSTRUCTION MANUAL Zakad Mechaniki i Elektroniki ZAMEL sp.j. J.W. Dzida, K. odziska ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: marketing zamel.pl DESCRIPTION TECHNICAL DATA LKM-03 The LKM-03 power supply indicator is Power terminals: L, N designed for single-phase system volt- Rated voltage: 230 V~ age signalling. Voltage presence is being signalled by means of a high-brightness Rated voltage tolerance: -15 +10 % LED. Various LED colour versions are Rated frequency: 50 / 60 Hz available (red, green, yellow). Rated current for 10/20/30 versions: 3,5 mA / 15 mA / 15 mA Power supply indicator: LED Number of terminal clamps: 2 2 FEATURES Section of connecting cables: 0,2 2,5 mm o Ambient temperature range: -20 +45 C Operating position: freely Single-phase voltage presence Mounting: rail TH 35 (PN-EN 60715) optical signalling, Protection degree: IP20 (PN-EN 60529) High-brightness LED applied, Protection level: II High durability optical indicator applied, Overvoltage category: II Various LED colours available, Pollution degree: 2 Easy applicable together with atypi- Dimensions: monomodular (17,5 mm) 90x17,5x66 mm cal systems, Weight: 45 g monomodular casing, Reference standards: PN-EN 60947-5-1 TH-35 DIN rail installation. APPERANCE The device is designed for three-phase installation and must be installed in accor- dance with standards valid Power terminal (L) Power terminal (N) in a particular country. The device should be connec- CAUTION ted according to the details included in this operating manual. Installa- tion, connection and control should be car- ried out by a qualified electrician staff, who act in accordance with the service manual and the device functions. Disassembling of the device is equal with a loss of guaran- tee and can cause electric shock. Before Voltage indicator installation make sure the connection cables are not under voltage. The cruci- form head screwdriver 3,5 mm should be used to instal the device. Improper trans- port, storage, and use of the device influ - ence its wrong functioning. It is not advi- sable to instal the device in the following cases: if any device part is missing or the device is damaged or deformed. In case of improper functioning of the device con- tact the producer. The symbol means selective collecting of electrical and electronical equipment. It is forbidden to put the used equipment together with other waste VER. 001 20.01.2010MOUNTING, FUNCTIONING CONNECTING TIME DIAGRAMS 1. Disconnect the power supply from the mains by the phase fuse, the circuit-breaker or the switch-di- sconnector that are joined to the proper circuit, 2. Check if there is no voltage on PRODUCT FAMILY connection cables by means of a special measure equipment, LKM-03 power supply indicator belongs to LKM voltage indicators family. 3. Install LKM-03 device in the switchboard on TH-35 DIN rail, Colour version: 10 - red LED (not applied to LKM-04, 4. Connect the cables with the ter- LKM-05) minals according to installing dia- 20 - green LED (not applied to LKM-04, LKM-05) gram, 30 - yellow LED (not applied to LKM-04, LKM-05) 40 - LED yellow, green, red (not applied 5. Switch on the power supply from to LKM-03) the mains. Device version: 01 - three-phase power supply with neutral The device is ready to work just wire N 02 - three-phase power supply without right after its appropriate connec- neutral wire N ting. The LED indicator signals vol- 03 - single-phase power supply with neutral wire N, high brightness LED tage presence of the selected phase 04 - three-phase power supply with neutral wire N, high brightness LEDs wire. In case of the voltage lack LED 05 - three-phase power supply with neutral wire N, high brightness LEDs does not light. Device symbol DIMENSIONS APPLICATION The LKM-03 power supply indicator INNER DIAGRAM signals single-phase voltage presence. WARRANTY CARD There is 24 months guarantee on the product 1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product. 2. The manufacturers guarantee does not cover any of the following actions: a) mechanical damage during transport, loading / unloading or under other circumstances, b) damage caused by incorrect product mounting or misuse, c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices needed for the product functioning, d) damage caused by Act of God or any other incidents independent of the manufacturer. 3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J. 4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation. 5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return. 6. The manufacturers guarantee is valid in the Republic of Poland. 7. The PURCHASERs statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty. Salesman stamp and signature, date of sale VER. 001 20.01.2010