AZ943 15 AMP MINIATURE PC BOARD RELAY FEATURES High performance Low seated height Flux tight and sealed versions available Class B insulation (130C) standard Class F insulation (155C) available UL, CUR file E43203 TV file R50161256 GENERAL DATA CONTACTS Life Expectancy 7 Arrangement SPST (1 Form A) Mechanical 1 x 10 5 SPDT (1 Form C) Electrical 1 x 10 at 10 A 277 VAC Res. Operate Time 10 ms max. Ratings Form A and C Max. switched power: 210 W or 2770 VA Release Time 5 ms max. Max. switched current: 15 A AC, 7 A DC (with no coil suppression) Max. switched voltage: 30 VDC or 300 VAC UL/CUR 1 Form A Dielectric Strength 1500 Vrms contact to coil 15 A at 125 VAC, general use (at sea level for 1 min.) 1000 Vrms across contacts 10A at 277 VAC, general use, 100,000 cycles Insulation Resistance 100 megohms min. at 500 VDC, TV - 5 120 VAC 50% RH 1/2 HP at 125 VAC 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) Dropout Greater than 10% of nominal coil voltage 8A at 125 VAC, 1000W (N.O.)Tungsten Ambient Temperature At nominal coil voltage 1 Form C Operating -40C(-40F) to 90C(194F) Class B 10 A at 277 VAC, general use, 100,000 cycles 1/2 HP at 125 VAC N.O. -40C(-40F) to 110C(230F) Class F 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) Storage -40C(-40F) to 130C(266F) 10 A/7A N.O./N.C. at 30 VDC resistive TV Vibration 0.062 DA at 1055 Hz 1 Form A Shock 10 g 10 A at 277 VAC, resistive, 70k cycles Enclosure P.B.T. polyester 1 Form C Terminals Tinned copper alloy, P.C. 5 A at 250 VAC, resistive, 100k cycles 8 A at 250 VAC, resistive, 50k cycles Max. Solder Temp. 270C (518F) 12 A at 125 VAC, resistive, 100k cycles Max. Solder Time 5 seconds Material Silver tin oxide (gold plating available not TV approved) Max. Solvent Temp. 80C (176F) Resistance < 100 milliohms initially Max. Immersion Time 30 seconds (24 V, 1 A method) Weight 10 g COIL Power NOTES At Pickup Voltage 203 mW 1. All values at 20C (68F). Max Continuous 1.8 W at 20C (68F) Class B Dissipation 2.4 W at 20C (68F) Class F 2. Relay may pull in with less than Must Operate value. 3. Unsealed relays should not be dip cleaned. Temperature Rise 32C (58F) at nominal coil voltage 4. Specifications subject to change without notice. Temperature Max. 130C (266F) Class B Max. 155C (311F) Class F 8/13/09AZ943 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil Must Operate Max Continuous Coil Resistance VDC VDC VDC 10% 5 3.8 11.2 70 AZ9431CH5D 6 4.5 13.4 100 AZ9431CH6D 9 6.8 20.1 225 AZ9431CH9D 12 9.0 26.8 400 AZ9431CH12D 18 13.5 40.2 900 AZ943-1CH-18D 24 18.0 53.4 1,600 AZ9431CH24D 48 36.0 107.3 6,400 AZ9431CH48D * Substitute 1AH in place of 1CH to indicate 1 Form A contact. Add suffix E for epoxy sealed versions. Add suffix G for gold plated contacts. To indicate Class F version, add suffix F. MECHANICAL DATA Outline Dimensions PC Board Layout .758 MAX .610 MAX 19.25 15.49 5X.051 .134 .059 1.30 3.40 1.49 .628 MAX 15.95 .236 .138 6.00 .472 3.5 12.00 .017 0.43 4x.016 0.40 .480 12.20 .014 .559 0.36 14.20 4x.032 0.80 .039 VIEWED TOWARD TERMINALS 1.00 Wiring Diagram 3 3 2 2 5 5 4 FORM FORM VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: .010 8/13/09