0E13-00K0 ZF Cherry

Snap Action Switch Single Pole General Purpose E13, E14, G13 Features Typical Applications Choice of 3 current ratings Household appliances Long life coil spring, snap action mechanism Automated assembly lines Agency approved extended life versions available Brake switch on utility vehicles RoHS compliant Industrial and accessible door openers High temperature versions available contact factory Vending machines Example: E13-00E0 is a 15 A, normally open SPDT pole switch with a standard ratio button Part Number Breakdown E13-00E0 actuator. 1 1 Series Type Type Circuitry Actuator Single pole Standard ratio actuator E13 0 0 Double Throw A Button for E14 15 A or button Single pole E14 5 High ratio actuator 1 Normally Open E Button for E13 25 A Single pole G13 2 Normally Closed H Lever 0.1 A J Button with ferrule 1 Actuator Type 5 only available with H and K actuators K Roller Button with extra M over-travel and ferrule Electrical Specifications per UL1054 15 A, 125 / 250 VAC 2 E13 6000 operations 100,000 available contact factory HP, 125 VAC / 1 HP, 250 VAC 2 2 A, 48 VDC 25 A, 125 / 250 VAC 2 E14 6000 operations 1 HP, 125 VAC / 2 HP, 250 VAC 2 2 A, 48 VDC 0.1 A, 125 VAC G13 100,000 operations 0.1 A, 30 VDC 2 DC ratings to 105 C (221 F) only Commonly Stocked Distributor Parts E13-00E0 E13-00M0 E14-00A0 E14-01M0 E13-00H0 E13-01E0 E14-00H0 E14-50H0 E13-00J0 E13-01H0 E14-00K0 G13-00M0 E13-00K0 E13-50H0 E14-00M0 G13-50H0 Notes: Part numbers with a leading 0 are functionally no different than without a leading 0 (ex.: 0E13-00E0 is the same switch as E13-00E0). Quick-connect terminals are standard for custom screw terminals, contact the factory or your distributor. For configurable part numbers not listed above or for custom part numbers, contact the factory or your distributor www.cherryswitches.com Page 1 of 3, Last update 2015-04-08, Specifications subject to change without notice. 3 Actuator Specifications E13/G13 Series 4 Actuator Max Max Operating Point Min Over- Max Actuation 5 Operating Pre-Travel Travel Movement Length Force Differential g (lb) mm (in) mm (in) mm (in) mm (in) mm (in) E 425 (0.94) 1.27 (0.050) 7.24 0.51 (0.285 0.020) 2.54 (0.100) 0.38 (0.015) N/A H 100 (0.22) 6.35 (0.250) 7.93 1.57 (0.312 0.062) 4.75 (0.187) 2.36 (0.093) 38.10 (1.500) H High ratio 65 (0.14) 8.71 (0.343) 7.14 1.57 (0.281 0.062) 4.75 (0.187) 3.56 (0.14) 44.45 (1.750) J 425 (0.94) 1.27 (0.050) 17.02 0.76 (0.670 0.030) 2.74 (0.108) 0.38 (0.015) N/A K 100 (0.22) 6.35 (0.250) 18.24 1.57 (0.718 0.062) 4.75 (0.187) 2.36 (0.093) 35.33 (1.391) K High ratio 63 (0.14) 10.24 (0.403) 17.45 1.57 (0.687 0.062) 4.75 (0.187) 2.36 (0.093) 41.28 (1.625) M 425 (0.94) 1.27 (0.050) 20.63 0.76 (0.812 0.030) 5.54 (0.218) 0.38 (0.015) N/A E14 Series 4 Actuator Max Max Operating Point Min Over- Max Actuation 5 Operating Pre-Travel Travel Movement Length Force Differential g (lb) mm (in) mm (in) mm (in) mm (in) mm (in) A 850 (1.87) 2.54 (0.100) 6.30 0.66 (0.248 0.026) 1.27 (0.050) 0.38 (0.015) N/A H 280 (0.62) 7.93 (0.312) 11.89 1.57 (0.468 0.062) 2.67 (0.105) 1.27 (0.050) 20.85 (0.821) H High ratio 170 (0.37) 13.34 (0.525) 11.10 1.57 (0.437 0.062) 5.54 (0.218) 2.03 (0.080) 27.20 (1.071) J 850 (1.87) 2.54 (0.100) 16.08 0.76 (0.633 0.030) 1.27 (0.050) 0.38 (0.015) N/A K 285 (0.63) 8.84 (0.348) 21.84 1.57 (0.860 0.062) 3.30 (0.130) 1.14 (0.045) 17.48 (0.688) K High ratio 211 (0.47) 12.27 (0.483) 21.03 1.57 (0.828 0.062) 5.54 (0.218) 1.85 (0.073) 23.95 (0.943) M 850 (1.87) 2.54 (0.100) 19.69 0.76 (0.775 0.030) 4.27 (0.168) 0.38 (0.015) N/A 3 Contact factory regarding combinations not shown 4 Measured above reference line refer to dimensional drawing below 5 Actuator tolerances 0.791 mm (0.031) G13 has operating point tolerance of 7.62 (0.30) E14 H and K actuators are shorter and formed up 11 at the button Material Specifications Case General Purpose Phenolic Actuating Button Thermoplastic Common Terminal Copper Alloy Copper Alloy (E13, G13) NO and NC Terminal Copper (E14) Copper Alloy (E13, G13) Moving Blade Copper (E14) Spring Stainless Steel Auxiliary Actuators Cold-Rolled Steel (Nickel-Plated) Roller Sintered Stainless Steel Gold Crosspoint (G13) Contacts Silver Alloy (E13, E14) Environmental Specifications 105 C (221 F) standard Temperature Rating 150 C (302 F) available 200 C (392 F) available for E13 Flammability Rating UL94HB Dimensions see page 3 www.cherryswitches.com Page 2 of 3, Last update 2015-04-08, Specifications subject to change without notice.