GENERAL PURPOSE SINGLE & DOUBLE POLE
ESeries
Features
Thermoplastic actuating button
Stainless steel springs
5 current ratings
Phenolic case
Choice of actuator styles
NC terminal
3 terminal types (optional screw
Common
terminals available consult factory)
terminals NO terminal
NC terminal
3 contact arrangements
Long-life coil spring mechanism NO terminal
High-temperature 150C and 200C
Brass moving blades Silver alloy, silver-cadmium oxide or
available on select models (consult factory) gold crosspoint contacts
Electrical Ratings
Electrical Life at Rated Load
Switch According to VDE According to UL
Series EN61058 Rating UL1054 Rating (Min. Operations) (Min. Operations)
E13/E19 N/A 15A, 125/250VAC; 3/4HP, 125VAC N/A 6,000*
1-1/2HP, 250VAC
E19A N/A 15A, 125/250VAC; 0.1A, 125VAC N/A 6,000
(mixed ratings)
E14/E25 N/A 25A, 125/250VAC; 1HP, 125VAC N/A 6,000
2HP, 250VAC
E20 N/A 20A, 125/250VAC; 1HP, 125VAC N/A 6,000
2HP, 250VAC
E28/E29 N/A 30.1A, 125/250/277VAC N/A 6,000
(UL Approved Only Resistive Load Only)
E30 N/A 30.1A, 125/250VAC; 1HP, 125VAC N/A 6,000
2HP, 250VAC
G13/G20 N/A 0.1A, 125VAC N/A 6,000*
*Indicates 100K life available.
Specifications
Electrical
Temperature Rating: 105C Std. (150C and 200C optional E13, E14, E19, E20, G13)
85C Std. (E28 and E29), 85C Std. (150C optional) E25
Flammability Rating: UL94HB
Materials
Case: General Purpose Phenolic
Actuating Button: Thermoplastic Nylon
Common Terminals: Brass (E13, E19, E19A, G13, G20)
Silver-Plated Brass (E14, E20, E28, E29, E30)
NO and NC Terminals: Brass (E13, E19, E19A, G13, G20)
Copper (E14, E20, E28, E29, E30)
Moving Blade: Brass (E13, E19, E19A, G13, G20)
Silver-Plated Beryllium Copper (E14, E20, E28, E29, E30)
Spring: Stainless Steel
Auxiliary Actuators: Cold-Rolled Steel (Nickel-Plated)
Roller: Sintered Stainless Steel
Contacts: Gold Crosspoint (G13, G20, E19A)
Silver-Cadmium Oxide (E13, E14, E19, E20, E28)
Silver Alloy (E19A, E29, E30)
(E25 only)Dimensions Single Pole inches (mm) Actuators Single Pole
Standard type integral hinged lever and
roller actuators are available in choice of
Cavity for External
two mounting positions. Actuation lengths
Auxiliary Actuator
+
0.310 0.005
-
are dimensioned from centerline of switch
+
(7.92 0.13)
-
0.250 (6.35) x 0.032 (0.813)
mounting hole as shown.
Q.C. or Faston Terminal
+
0.640 0.015
-
+
(16.26 0.38)
- Actuation
0.375 (9.53)
Length
0.375
(9.53)
0.250 (6.35)
diameter
0.095 (2.41) Dia. Hole
(3 places)
0.135 +0.005
+0.005
0.145 (3.68) Diameter x 0.175
-0.010 0.150 0.010
Switch
Mounting Hole
0.130 Reference
High Ratio Standard Ratio
0.500 (12.7)
(3.30) 0.195 Line
(4.95)
Actuation
0.375 (9.53)
Length
+ 0.300 +
0.380 0.015
0.640 0.015
- -
N.C.
(7.62)
+ +
(16.26 0.38) (9.65 0.38)
- 0.250 (6.35)
- COM
N.O.
30
Switch
+
0.33 0.41
1.000 0.007
-
Mounting Hole
+
(8.38) (25.4 0.18) (10.41)
-
High Ratio Standard Ratio
+ +
1.823 0.015 0.364 0.015
0.41 -
-
+ +
(10.41) (46.30 0.38) (9.25 0.38)
- -
J & M Type
Optional Hardware Single Pole
Actuator Specifications Single Pole
Brass Hex Nut 0012-0023
MaximumMaximum Operating MinimumMax. MovementActuation
Operating Pre-Travel Point* Over-Travel Differential Length**
Brass Knurled Nut 0012-0025
Series/ Actuator Switch Force inches inches inches inches inches
Prefix Type Type (g) (mm) (mm) (mm) (mm) (mm)
Brass Hex Nut 0012-0028
(Nickel-Plated)
E13/G13 00E 425 0.050 0.2850.020 0.100 0.015
(1.27) (7.240.51) (2.54) (0.38)
Brass Knurled Nut 0012-0021
E14/E29/E30 00A 850 0.100 0.2480.026 0.050 0.015
(Nickel-Plated)
(2.54) (6.300.66) (1.27) (0.38)
Star Washer 0012-0073
E13/G13 00J 425 0.050 0.6700.030 0.108 0.015
(1.27) (17.020.76) (2.74) (0.38)
Extra Over-travel with Internal
E14/E29/E30 850 0.100 0.6330.030 0.050 0.015 Thermoplastic
Spring-loaded Metal Button
Button
(2.54) (16.080.76) (1.27) (0.38) - OOM Suffix
- OOJ Suffix
E13/G13 00M 425 0.050 0.8120.030 0.218 0.015
3/8 x 32 Thread
(1.27) (20.630.76) (5.54) (0.38) 0.406 (10.31)
0.312 (7.93)
Flat Both Sides
E14/E29/E30 850 0.100 0.7750.030 0.168 0.015
(2.54) (19.690.76) (4.27) (0.38)
E13/G13 00H 100 0.250 0.3120.062 0.187 0.093 1.500
(6.35) (7.931.57) (4.75) (2.36) (38.10)
Circuitry Single Pole
E14/E29/E30 285 0.312 0.4680.062 0.150 0.050 0.821
Contact arrangement available in choice of
(7.93) (11.891.57) (3.81) (1.27) (20.85)
single pole double throw or single pole sin-
E13/G13 50H 65 0.343 0.2810.062 0.187 0.140 1.750
gle throw, either normally open or normally
(8.71) (7.141.57) (4.75) (3.56) (44.45)
closed. In general, normally open may be
E14/E29/E30 170 0.525 0.4370.062 0.218 0.080 1.071
specified by changing suffix number from
(13.34) (11.101.57) (5.54) (2.03) (27.20)
00 to 01 and normally closed by changing
E13/G13 00K 100 0.250 0.7180.062 0.187 0.093 1.391
suffix number to 02.
(6.35) (18.241.57) (4.75) (2.36) (35.33)
Example: E13-00E is double throw,
E14/E29/E30 285 0.348 0.8600.062 0.130 0.045 0.652
(8.84) (21.841.57) (3.30) (1.14) (16.56) E13-01E is normally open, and E13-02E
is normally closed.
E13/G13 50K 65 0.343 0.6870.062 0.187 0.140 1.645
(8.71) (17.451.57) (4.75) (3.56) (41.78)
E14/E29/E30 170 0.483 0.8280.062 0.218 0.073 0.902
Terminals Single Pole
(12.27) (21.031.57) (5.54) (1.85) (22.91)
Standard 0.250 x 0.032 (6.35mm x 0.81mm)
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance 0.031 inches (0.79mm).
E14, E29 and E30 actuators are shorter and formed up 11 at the button.
[Optional 0.187 x 0.032 (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
Ordering Information Mounting Single Pole formed up or down. Forms include straight
30, 45, 85 up or down. Other forms can
Recommended mounting screw: #6-32
Select the current rating you need.
be provided. Screw terminal UL approved
round head. Recommended torque on
Combine the corresponding Series/Prefix
on E14 and E30 only.
screw: 6 inch lbs. max.
number with the appropriate suffix number
for the switch you need.
Specifications subject to change without notice.
49