SUBMINIATURE ESeries Features 4 current ratings Thermoplastic actuating button Choice of actuator Copper alloy blade Stainless steel spring 5 terminal types 3 contact arrangements Long life coil spring mechanism DC ratings available upon request Silver contacts or High-temperature version available gold crosspoint contacts Subminiature modules take less space Thermoplastic case than individual subminiature switches NC terminal fastened side-by-side. For applications requiring 2, 3, 4 or 5-circuit control in a compact space, the special molded case design helps speed assembly since there Common terminal NO terminal is only one part to handle and install rather than 2, 3, 4 or 5 individual switches. Electrical Ratings Electrical Life at Rated Load Switch According to VDE According to UL Series EN61058 Rating UL1054 Rating (Min. Operations) (Min. Operations) E61 N/A 5A, 125/250VAC N/A 6,000* 5A, 30VDC (optional) E62 N/A 10.1A, 125/250VAC 1/4HP, 125VAC N/A 6,000 E63 N/A 0.1A, 125VAC N/A 6,000 0.25A, 30VDC (optional) E64 N/A 13A, 125VAC 10.1A, 250VAC N/A 6,000 *Indicates 100K life available. Specifications Electrical Temperature Rating: -40 to +85C, +130 optional using thermoset material Flammability Rating: UL94HB Materials Case: Thermoplastic Actuating Button: Thermoplastic Acetal Terminals: Silver-Plated Commercial Bronze Moving Blade: Beryllium Copper Spring: Stainless Steel Auxiliary Actuator: Cold Rolled Steel (Nickel-Plated) Contacts: Fine Silver (except E63 Gold Crosspoint) 18 Dimensions inches (mm) PCB Footprint Terminals 0.093 C NO NC 0.781 (2.36) (19.84) 0.405 ( ) 0.063 (1.60) 3 QC Short Solder (10.29) 0.250 0.125 0.197 (5.00) PCB Terminals Lateral to Case or Cover (6.35) 0.250 (3.18) 0.237 (6.02) PCB Terminals Straight Down Only (6.35) 0.058 (1.47) 0.143 (3.63) 0.093 0.093 (2.36) (2.36) Actuators 10A 00A Many special forms and lengths of actuators QC Barrel 0.300 (7.62) are available. Standard type integral hinged 0.177 lever and roller actuators are available in 0.344 (4.50) 0.050 (8.74) Nominal (1.27) choice of 2 pivot positions. Actuation lengths ( ) 0.375 0.087 2.21 Operate (9.53) 0.095 (2.41) Position 0.073 (1.85) I.D. with are dimensioned from centerline of switch 0.110 (2.79) 0.352 0.032 (0.81) Clinch Opening (8.94) mounting hole as shown. 30A 40A Reference Line COM N.O. N.C. PCB ( ) 0.087 2.21 Dia. Hole 0.093 0.095 (2.41) 0.133 (3.378) Standard Actuator Width (2.36) 0.191 0.160 + 0.375 0.005 - (4.85) (4.06) + (9.53 0.13) 0.094 (2.39) - 0.109 (2.77) 0.051 (1.30) C of Actuating Button 0.073 0.405 0.237 L (1.85) (10.29) (6.02) 50A 0.066 0.483 (1.676) (12.268) Actuation Length 0.125 (3.175) Actuator Specifications Maximum Maximum Operating MinimumMax. MovementActuation Operating Force (gms.) Pre-Travel Point* Over-Travel Differential Length** Actuator Switch inches inches inches inches inches Reference High Ratio Type Type E61 E62 E63 E64 (mm) (mm) (mm) (mm) (mm) Line Standard Ratio 00A 90 212 90 335 0.030 0.3300.015 0.040 0.004 (0.76) (8.380.38) (1.06) (0.10) 00R 30 65 30 110 0.130 0.5740.054 0.030 0.020 0.196 (3.30) (14.581.37) (0.76) (0.51) (4.98) 50R 10 22 10 40 0.379 0.5700.156 0.050 0.050 0.322 Terminals (9.63) (14.483.96) (1.27) (1.27) (8.18) Subminiature series is available with quick 00H 27 56 27 100 0.144 0.3500.030 0.040 0.020 0.271 connect. 0.093 (2.36mm) wide (mates (3.66) (8.890.76) (1.02) (0.51) (6.88) with AMP Part No. 60432-1) and 0.110 50H 9 20 9 35 0.416 0.3500.175 0.050 0.050 0.396 (10.57) (8.894.45) (1.27) (1.27) (10.06) (2.794mm) wide (mates with AMP Part 00K 30 65 30 110 0.131 0.5700.030 0.030 0.020 0.203 No. 42068-1). Also available in short solder (3.33) (14.480.76) (0.76) (0.51) (5.16) terminal 0.143 (3.63mm) wide x 0.125 50K 10 33 10 40 0.379 0.5700.158 0.040 0.050 0.326 (3.18mm) long, and PCB terminal 0.051 (9.63) (14.484.01) (1.02) (1.27) (8.28) (1.30mm) wide x 0.191 (4.85mm) long. *Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance of 0.031 inches (0.79mm). Terminal SPDT SPST NO SPST NC Circuitry Ordering Information 0.093 QC E61-00A E61-01A E61-02A Contact arrangement available in choice of Select the current rating you need. Combine Short Solder E61-10A E61-11A E61-12A single pole double throw or single pole single the corresponding Series/Prefix number 0.110 QC E61-30A E61-31A E61-32A throw, either normally open or normally with the appropriate suffix number for the Barrel E61-40A E61-41A E61-42A closed. In general, normally open may be switch type, circuitry and terminals you PCB E61-50A E61-51A E61-52A specified by changing suffix number from require. See additional note under terminals. Not available on E64 Series. 00 to 01 and normally closed by changing Example: To order the E61-50R with 0.110 suffix number to 02. (2.79mm) QC terminals, order an E61-80R. Example: E61-01A is normally open, and Note: 0.093 (2.36mm) Quick Connect E61-02A is normally closed. terminals are standard. To order solder terminals add 10 to suffix. To order 0.110 (2.79mm) QC terminals add 30 to suffix. Mounting For PCB terminals consult factory. Recommended mounting screw: 2-56 Example: The basic E61-00A becomes round head. Recommended torque on E61-30A for 0.110 (2.79mm) QC terminals. screw: 2 inch lbs. max. For PCB terminals consult factory for part numbers. 19 Specifications subject to change without notice.