SUBMINIATURE
ESeries
Features
4 current ratings
Thermoplastic
actuating button
Choice of actuator
Copper alloy blade
Stainless steel spring
5 terminal types
3 contact arrangements
Long life coil spring mechanism
DC ratings available upon request
Silver contacts or
High-temperature version available
gold crosspoint
contacts
Subminiature modules take less space
Thermoplastic
case
than individual subminiature switches
NC terminal
fastened side-by-side. For applications
requiring 2, 3, 4 or 5-circuit control in a
compact space, the special molded case
design helps speed assembly since there
Common terminal NO terminal
is only one part to handle and install rather
than 2, 3, 4 or 5 individual switches.
Electrical Ratings
Electrical Life at Rated Load
Switch According to VDE According to UL
Series EN61058 Rating UL1054 Rating (Min. Operations) (Min. Operations)
E61 N/A 5A, 125/250VAC N/A 6,000*
5A, 30VDC (optional)
E62 N/A 10.1A, 125/250VAC; 1/4HP, 125VAC N/A 6,000
E63 N/A 0.1A, 125VAC N/A 6,000
0.25A, 30VDC (optional)
E64 N/A 13A, 125VAC; 10.1A, 250VAC N/A 6,000
*Indicates 100K life available.
Specifications
Electrical
Temperature Rating: -40 to +85C, +130 optional using thermoset material
Flammability Rating: UL94HB
Materials
Case: Thermoplastic
Actuating Button: Thermoplastic Acetal
Terminals: Silver-Plated Commercial Bronze
Moving Blade: Beryllium Copper
Spring: Stainless Steel
Auxiliary Actuator: Cold Rolled Steel (Nickel-Plated)
Contacts: Fine Silver (except E63 Gold Crosspoint)
18
Dimensions inches (mm) PCB Footprint
Terminals
0.093
C NO NC
0.781
(2.36)
(19.84)
0.405
( )
0.063 (1.60) 3
QC Short Solder (10.29)
0.250
0.125 0.197 (5.00) PCB Terminals Lateral to Case or Cover
(6.35)
0.250 (3.18)
0.237 (6.02) PCB Terminals Straight Down Only
(6.35)
0.058
(1.47)
0.143 (3.63)
0.093 0.093 (2.36)
(2.36)
Actuators
10A
00A
Many special forms and lengths of actuators
QC Barrel
0.300
(7.62)
are available. Standard type integral hinged
0.177
lever and roller actuators are available in
0.344
(4.50)
0.050
(8.74)
Nominal
(1.27) choice of 2 pivot positions. Actuation lengths
( )
0.375 0.087 2.21
Operate
(9.53)
0.095 (2.41) Position
0.073 (1.85) I.D. with are dimensioned from centerline of switch
0.110 (2.79)
0.352
0.032 (0.81) Clinch Opening
(8.94)
mounting hole as shown.
30A
40A
Reference
Line
COM N.O. N.C.
PCB
( )
0.087 2.21
Dia. Hole
0.093
0.095 (2.41) 0.133 (3.378) Standard Actuator Width
(2.36)
0.191
0.160
+
0.375 0.005
- (4.85)
(4.06)
+
(9.53 0.13)
0.094 (2.39) -
0.109 (2.77)
0.051 (1.30)
C of Actuating Button
0.073 0.405 0.237 L
(1.85) (10.29) (6.02) 50A
0.066
0.483
(1.676)
(12.268) Actuation
Length
0.125
(3.175)
Actuator Specifications
Maximum Maximum Operating MinimumMax. MovementActuation
Operating Force (gms.) Pre-Travel Point* Over-Travel Differential Length**
Actuator Switch inches inches inches inches inches
Reference
High Ratio
Type Type E61 E62 E63 E64 (mm) (mm) (mm) (mm) (mm)
Line
Standard Ratio
00A 90 212 90 335 0.030 0.3300.015 0.040 0.004
(0.76) (8.380.38) (1.06) (0.10)
00R 30 65 30 110 0.130 0.5740.054 0.030 0.020 0.196
(3.30) (14.581.37) (0.76) (0.51) (4.98)
50R 10 22 10 40 0.379 0.5700.156 0.050 0.050 0.322 Terminals
(9.63) (14.483.96) (1.27) (1.27) (8.18)
Subminiature series is available with quick
00H 27 56 27 100 0.144 0.3500.030 0.040 0.020 0.271
connect. 0.093 (2.36mm) wide (mates
(3.66) (8.890.76) (1.02) (0.51) (6.88)
with AMP Part No. 60432-1) and 0.110
50H 9 20 9 35 0.416 0.3500.175 0.050 0.050 0.396
(10.57) (8.894.45) (1.27) (1.27) (10.06) (2.794mm) wide (mates with AMP Part
00K 30 65 30 110 0.131 0.5700.030 0.030 0.020 0.203
No. 42068-1). Also available in short solder
(3.33) (14.480.76) (0.76) (0.51) (5.16)
terminal 0.143 (3.63mm) wide x 0.125
50K 10 33 10 40 0.379 0.5700.158 0.040 0.050 0.326
(3.18mm) long, and PCB terminal 0.051
(9.63) (14.484.01) (1.02) (1.27) (8.28)
(1.30mm) wide x 0.191 (4.85mm) long.
*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance of 0.031 inches (0.79mm).
Terminal SPDT SPST NO SPST NC
Circuitry Ordering Information
0.093 QC E61-00A E61-01A E61-02A
Contact arrangement available in choice of Select the current rating you need. Combine
Short Solder E61-10A E61-11A E61-12A
single pole double throw or single pole single the corresponding Series/Prefix number
0.110 QC E61-30A E61-31A E61-32A
throw, either normally open or normally with the appropriate suffix number for the
Barrel E61-40A E61-41A E61-42A
closed. In general, normally open may be switch type, circuitry and terminals you
PCB E61-50A E61-51A E61-52A
specified by changing suffix number from require. See additional note under terminals.
Not available on E64 Series.
00 to 01 and normally closed by changing
Example: To order the E61-50R with 0.110
suffix number to 02.
(2.79mm) QC terminals, order an E61-80R.
Example: E61-01A is normally open, and
Note: 0.093 (2.36mm) Quick Connect
E61-02A is normally closed.
terminals are standard. To order solder
terminals add 10 to suffix. To order 0.110
(2.79mm) QC terminals add 30 to suffix.
Mounting
For PCB terminals consult factory.
Recommended mounting screw: #2-56
Example: The basic E61-00A becomes
round head. Recommended torque on
E61-30A for 0.110 (2.79mm) QC terminals.
screw: 2 inch lbs. max.
For PCB terminals consult factory for
part numbers.
19
Specifications subject to change without notice.