PANEL MOUNT PUSHBUTTON SINGLE & DOUBLE POLE ESeries Features Choice of Momentary, Push-Pull (reset) and Cheat Interlock switches Snap-in panel mounting Long-life coil spring, snap-action mechanism Agency approved extended-life versions available VDE approval available on select models (F Series) Various terminal forms available (consult factory) Electrical Ratings Electrical Life at Rated Load Switch According to VDE According to UL Series EN61058 Rating UL1054 Rating (Min. Operations) (Min. Operations) E65 N/A 16A, 125/250VAC 1/3HP, 125/250VAC N/A 6,000 E/F68 0.1(0.05)A, 125VAC 0.1A, 125VAC 50,000 6,000* E/F69 10(4)A, 250VAC 10A, 125/250VAC 1/3HP, 125/250VAC 50,000 6,000* E/F77 0.1(0.05)A, 125VAC 0.1A, 125VAC 10A, 1/3HP, 125/250VAC 50,000 6,000* 10(4)A, 250VAC E/F78 0.1(0.05)A, 125VAC 0.1A, 125VAC 50,000 6,000* E/F79 10(4)A, 250VAC 10A, 125/250VAC 1/3HP, 125/250VAC 50,000 6,000* E75 N/A 16A, 125/250VAC 1/3HP, 125/250VAC N/A 6,000* 0.1A VAC, 0.1A VDC (optional) mixed ratings available upon request *Indicates 100K life available. Specifications Electrical Temperature Rating: -40 to +85C Flammability Rating: UL94V-O Materials Case: Thermoplastic Polyester (Single Pole Valox and Vandar Double Pole) Actuating Button: Thermoplastic Acetal (Valox used on International versions) Terminals*: Brass Moving Blade: Beryllium Copper Spring: Stainless Steel Contacts: Silver-Cadmium Oxide (E65, E/F69, E75, E/F77, E/F79) Gold Crosspoint (E/F68, E/F77) *Common terminals are plated the remaining two terminals are not plated. (optional) 51Dimensions Single Pole inches (mm) Auxiliary Buttons Single Pole 50A has button with special shaft to accept auxiliary push buttons for manual actuation. Button Detail Single Pole A dimension (full overtravel position) Circuitry Single Pole Double throw or single throw versions available. Single Pole Series: Actuator Specifications Single Pole E65, E68/F68, E69/F69 Maximum Rest Maximum Operating Minimum Max. Movement Maximum Full Overtravel Position Pre-Travel Point* Over-Travel Differential Operating Position Actuator Switch inches inches inches inches inches Force** inches Terminals Single Pole Type Type (mm) (mm) (mm) (mm) (mm) (g) (mm) This switch series has 0.187 x 0.020 Basic Momentary Action (4.75mm x 0.51mm) as standard for up 00A 0.8450.905 0.125 0.7200.820 0.375 0.045 425 0.400 to 10 amps and 0.250 x 0.032 (6.35mm (21.4622.99) (3.18) (18.2920.83) (9.53) (1.14) (10.16) x 0.81mm) for 16 amps. Push-Pull (Reset) Consult factory for non-standard 20A 0.9200.980 0.150 0.8000.900 0.300 0.045 285 0.500 terminal options. (22.3724.89) (3.81) (20.3222.86) (7.62) (1.14) (12.70) Momentary 30A 0.7300.790 0.125 0.6100.710 0.100 0.045 425 0.520 International Versions (18.5420.07) (3.18) (15.4918.03) (2.54) (1.14) (13.21) Single Pole Cheat Interlock (Pull out to lock) For VDE applications, standard terminals 0.7300.790 0.125 0.8000.900 0.050 0.060 585 0.980 are 0.187 x 0.032 (4.75mm x 0.81mm). (18.5420.07) (3.18) (20.3222.86) (1.27) (1.52) (24.89) Switch prefix must be F for VDE Short Button Momentary approved switches. Example: F6830A 40A 0.4200.480 0.125 0.3000.400 0.175 0.045 425 0.125 was E6830A. (10.6712.19) (3.18) (7.6210.16) (4.45) (1.14) (3.18) For Auxiliary Push Button 50A 0.4200.480 0.125 0.3000.400 0.175 0.045 425 0.125 (10.6712.19) (3.18) (7.6210.16) (4.45) (1.14) (3.18) *Measured above reference line. Refer to dimensional drawing above. **Operating Forces listed above are for E68/E69 switches only. E65 Operating Force: 708 grams max. for momentary switches. Dual function switch: Push in to operate in normal momentary mode and pull out for maintained action. Ordering Information Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. Example: SPDT: E6830A, SPST NO: E6831A, SPST NC: E6832A. Specifications subject to change without notice. 52