GPTCRH02 ZF Cherry

General Purpose Snap Action Switch GP Series Features Ultra-small travel differential Wide variety of actuators Mechanical life tested to over 20 million cycles Screw or solder terminals available Current rating up to 20 amps VDE standard on 15A switches with screw terminals Electrical Ratings Switch Series UL508 VDE Approval to EN60947 20A 250VAC N/A GP*B 15A 250VAC GP*C 15A 250VAC (Note: Only screw terminals have VDE approval) Technical Specifications Material Specifications 0C + 55C Max UL Case / Cover Phenolic Temperature Rating: - 5C to + 40C VDE Spring Beryllium Copper Dielectric Strength 1000 VAC 50/60 Hz for 1 minute Contacts: Silver Alloy Insulation Resistance 100M ohms min at 500 VDC Screw Terminals: Brass Terminals: Solder Terminals: Copper Alloy Initial Contact Resistance 15m ohms max Contacts: Silver Alloy US Holes: #6-32 Fastener with 6.0 In-Lb Max Torque Mounting: Metric Holes: M4 Fastener with 6.0 In-Lb Max Torque UL File Number: E184788 Lever Actuator: Nickel Plated Steel RoHS Compliant Specifications subject to change without notice VDE for 15 amp with screw terminals only General Purpose Snap Action Switch GP Series Terminal Types Mounting Holes U.S. Version Screw Terminal Solder Terminal Metric Version Dimensions inches(mm) Note: GP Series switches are available with screw or solder terminals and with U.S. or metric holes For solder terminals, replace the T in the third position of the part number with an S (e.g. GPSCNA11 was GPTCNA11) For metric holes, replace the 1 in the seventh position with a 0 (e.g. GPTCNA01 was GPTCNA11)