HARTING Industrial Cable 8-wire Cat. 6 Outdoor PVC A Industrial Cable 8-wire, Cat. 6 , Outdoor, PVC A Advantages General This high-speed data cable was designed for flexible installation in Suitable for generic cabling Category 6 A / Class E according ISO/IEC 11801 industrial premises and its especially suitable for termination of A HARTING RJ45 data plugs in IP20 as well as in IP 67 / 65. respectively EN 50173-1 especially for flexible installation (patch cords) The four pair / eight wire PIMF-construction allows the transmission Designed for outdoor use, sun light of IT digital and analogue signals like Ethernet 10/100Mbit/s, resistant 10GigaBit/s, video and voice services as well as IP-based data Qualified for transmission up to services. 10GigaBit Ethernet 10GBase-T acc. IEEE802.3an It delivers all characteristics to complete a generic cabling system Based on stranded copper wires according ISO/IEC 24702 respectively EN 50173-3. Maximum AWG26/7 delivers patch cord patch cord length specified up to 20m (part of transmission channel performance up to 500MHz class E ) A Applicable for industrial premises and outdoor installation Transmission performance meets Cat.6 specification up to 500 A High EMC capability based on the PIMF MHz for 10GigaBit Ethernet transmission according IEEE802.3an. construction The cable is fully screened (each pair in metal foil plus an overall Flame retardant, lead free and RoHS wire braid) and guaranties a very safety signal transmission and compliant high EMC performance. UL certified for external use AWM Style PVC is used as jacket material. The cable is flame retardant, lead 20276 free and UV resistant. Identification Part number Drawing Industrial Cable 8-wire, Cat. 6 , Outdoor, PVC A 20 m ring 09 45 600 0531 50 m ring 09 45 600 0541 100 m ring 09 45 600 0501 500 m reel 09 45 600 0521 Wire: tinned stranded copper, AWG26/7 Insulation: PE, 1.05 mm Color code: whbu/bu, whor/or, whgn/gn, whbr/br Pairs : Aluminate foil overlapped PIMF Overall screen: tinned copper wire braid, braid coverage about 70 % Outer sheath: Polyvinylchloride (PVC), flame retardant, lead free Color of outer sheath: rape black, RAL 9005 Overall diameter: 6.3 mm 6.9 mm All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 04.02.2011 HARTING Industrial Cable 8-wire Cat. 6 Outdoor PVC A Technical Characteristics Performance Category 6 according to IEC 61156-6 A Mechanical Characteristics Minimal bending radius Repeated bending: 8 x diameter Single bending: 4 x diameter Dynamical bending (Tick - Tock) 30,000 cycles EN 50396:2005 Chpt. 6 (angle: +/- 90 , radius: 70 mm, laod: 1 kg, cyc. p. min: 70) Tensile strength max. 70 N Electrical Characteristics at 20 C Conductor resistance max. 290 Ohm/km Insulation resistance min. 500 MOhm*km Propagation delay 5.13 ns/m Characteristic impedance 100 MHz (100 5) Ohm Test voltage 700 V Operating voltage max. 100 V Chemical Characteristics Flame retardant IEC 60332-1-2 Free of hazardous substances RoHS 2002/95/EG Thermal Characteristics Permissible temperature range fixed operation - 20 C to + 80 C flexible operation - 20 C to + 80 C Printing HARTING INDUSTRIAL CABLE PVC OUTDOOR CAT 6 S/FTP A 4x2xAWG26/7 E333435 AWM STYLE 20276 80C 30V 094560001070001 meter marking Charge Number HARTING Logo Weight about 47 kg/km All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 04.02.2011