MB-10 Twin Industries

MicroAmp MB-10 Circuit Board For 5-pin SOT-23 Operational Amplifiers FEATURES Fits standard 5-pin SOT-23 op-amp packages Inverting or non-inverting conguration Optional DC blocks on input and output Uses standard 0603 passives RO-4350 board material Fits MicroAmp MH-series housings The MicroAmp MB-10 circuit board is designed for rapid prototyping of operational amplier circuits using popular 5-pin SOT-23 packages with the output on pin 1, non-inverting input on pin 3, and the inverting input on pin 4. It can be congured as an inverting or non-inverting topology with selectable input and feedback resistors and has a parallel feedback capacitor for ltering or compensa- tion. This board will t the MicroAmp MH series of connectorized housings that allow it to be used as a single amplier stage or cascaded with other MicroAmp boards for added versatility. Boards are fabricated from a high-performance 13 mil thick RO-4350 laminate with RoHS compatible ENIG plating (electroless nickel/immersion gold) on both the component side and the solid bottom ground plane. The board measures 0.490 x 0.590 and mounts into the housing with four 1-72 screws. Amplier circuits can be easily designed and assembled with standard 0603 surface-mount passive components. It includes provisions for input and output DC blocking capacitors, or these can be replaced with zero-ohm jumpers for DC operation. Pads for the input/output connectors allow the SMA center pins to be easily soldered to the board after it is installed into the housing, as well as large pads to connect the bias voltages to feed-throughs. Separate bias pads are provided for single and dual bias congurations. Use caution on the bias polarity depending upon the specic op-amp being used. REF SIZE FUNCTION C1 0606 Block or jumper (not labeled) C2 0603 Block or jumper (not labeled) C3 0603 Bias bypass C4 0603 Bias bypass C5 0603 Inverting feedback R1 0603 Inverting feedback gain R2 0603 Input gain R3 0603 Input divider R4 0603 Input divider R5 0603 Feedback gain U1 SOT-23 Op-Amp J1 Signal input J2 Signal output (pin 1) J3 Bias or ground (pin 2) ASSEMBLY J4 Bias or ground (pin 5) For additional product information, please visit www.twinind.com Contact information: 925-866-8946 (phone) 925-866-8937 (fax) Sales twinind.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for PCBs & Breadboards category: Click to view products by Twin Industries manufacturer: Other Similar products are found below : 8004 8007 8016 8017 8028 8029 1268-12 1268-10 1320833-1 923252-R 3410 3396 15107 8006 8015 8018 8019 8020 1268-19 1268- 20 8026 1239-19 SBBTH1520-1 SBBTH1506-1 SBBTH4080-1 SBBTH3030-1 SBBTH1512-1 SBBTH1508-1 SBBSM2120-1 SBB2808-1 SBB2805-1 SBB1605-1 SBB1602-1 SBB1005-1 SBB1002-1 3426 32P15WE ZAS1X206203XRPU160 SBBTH3040-1 SBB0004-1 SBB830-QTY10 7115 923749-I RE013-LF RE014-LF RE015-LF RE1210-LF RE200-C3 RE210-S1 RE317-HP