A dual in-series small signal high voltage switching diode typically consists of two diodes connected in series within a single package. These diodes are designed for high-speed switching applications and can handle high voltages.
Features:
#Fast Switching Speed: Ideal for applications requiring quick response times.
#High Voltage Capability: Can handle high reverse voltages, making them suitable for various high-voltage applications.
#Surface Mount Package: O..
View Products
|
SE60N3x Surface-Mount Standard Rectifiers are AEC-Q101 qualified, ideal for automated replacement, and offer ESD capability. These rectifiers provide leadless DFN packages with side-wettable flanks suitable for customer Automatic Optical Inspection (AOI). The SE60N3x surface mount standard rectifiers have a single configuration and SMD/SMT mounting style. These rectifiers feature a low-profile package with a typical height of 0.88mm. The SE60N3x rectifiers operate at -55°C to 175°C junction tem..
View Products
|
PTC Thermistors, Inrush Current Limiter High Energy. These directly heated ceramic-based doped barium titanate thermistors have a positive temperature coefficient and are primarily intended for inrush current limiting and overload
protection.
FEATURES
Higher energy absorption levels up to 300 J
High number of inrush-power cycles:> 100 000 cycles
Highly resistant against non-switching peak-powers of up to 25 kW
Can handle high direct voltage up to 1200 V
View Products
|
Power Metal Strip Resistors, High Power (2 x Standard WSL),Low Value (Down to 0.0005 Ohm), Surface-Mount
FEATURES
All welded construction of the Power Metal Strip resistors are ideal for all types of current sensing, voltage division and pulse applications
Proprietary processing technique produces extremely low resistance values (down to 0.0005 Ohm)
Sulfur resistance by construction that is unaffected by high sulfur environments
Very low inductance 0.5 nH t..
View Products
|
The P16S is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back
side of the panel reducing to a minimum the required clearance.
FEATURES
P16S - version for military, professional and
industrial applications (cermet): 1 W at 40 °C
PA16S - version for professional audio
applications (conductive plastic)..
View Products
|
Power Resistor for Mounting onto a Heatsink Thick Film Technology
RECOMMENDATIONS FOR MOUNTING ONTO A HEATSINK
Surfaces in contact must be carefully cleaned.
The heatsink must have an acceptable flatness: From 0.05 mm to 0.1 mm/100 mm.
Roughness of the heatsink must be around 6.3 µm. In order to improve thermal conductivity, surfaces in contact (alumina,heatsink) should be coated with a silicone grease (type Bluesil Past 340 from BlueStar Silicones) or a thermal film (..
View Products
|
Vishay Intertechnology introduces three new series of Automotive Grade surface-mount standard rectifiers that are the industrys first devices in the Power DFN Series DFN3820A package with wettable flanks. Providing space-saving, high efficiency solutions, the 2 A SE20Nx, 3 A SE30Nx, and 4 A SE40Nx are each available with reverse voltages of 200 V, 400 V, and 600 V.
FEATURES
Low-profile package - typical height of 0.88 mm
deal for automated placement
Junction passi..
View Products
|
Aluminum Electrolytic Capacitors, Power High Ripple Current, Screw Terminals (202 PML-ST)
FEATURES
Long useful life: 10 000 h at +85 C
Low ESR in smaller case sizes compared to the 102 PHR-ST series
Available in case sizes up to Ø 90 mm x 220 mm
Polarized aluminum electrolytic capacitors, non-solid electrolyte
Large types, cylindrical aluminum case, insulated with a blue sleeve
Pressure relief in the terminal disc
Material categorization: f..
View Products
|
These sensors exist of a small NTC chip reflow soldered between two AWG #24 UL-2468 style wires. They are lacquered and insulated with black epoxy.
FEATURES
Accurate over wide temperature range
High stability
Excellent price / performance ratio
High adhesive strength between PVC wire and the encapsulating lacquer
Material categorization:
APPLICATIONS
Available Temperature measurement, sensing and control in remote locations and f..
View Products
|
Panel Potentiometers are variable resistors that are commonly used for all applications involving a reasonable number of cycles (few tens of thousands, manually actuated). Mounted behind the front panel for various equipment, they frequently feature buttons mounted on their shafts. Typical applications include: setting the light or the brightness of a screen, turning the volume for an audio application, setting the speed on tool machining equipment, or various parameters for industrial remote c..
View Products
|
These thermistors are made of NTC ceramic material. The device consists of a chip with two tinned nickel leads. The parts are coated and color band marked. Tape and reel versions available on request.
FEATURES.
Accurate over a wide temperature range.
(tolerance on B-value down to 0.5 %).
Good stability over a long life.
Excellent price/performance ratio.
Low heat conductivity through 0.4 mm Ni-leads.
cULus recognized, file E148885 .
(U..
View Products
|
The P16 is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back side of the panel reducing to a minimum the required clearance.
FEATURES
Test according to CECC 41000 or IEC 60393-1
P16 - version for professional and industrial applications (cermet) 1 W at 40 °C
PA16 - version for professional audio applic..
View Products
|