3M MicroTouch Controller EX USB Reference Guide Model Size Cased Connector EX111 1 X 2 NO AMP EX121 2 X 3 NO 12 PIN EX141 2 X 3 YES 12 PIN EX151 1 X 2 NO ZIF Read and understand all safety information contained in this document before using this product. 3 3M Touch Systems, Inc. Proprietary Information TSD-29489 REV F 2 3M MicroTouch Controller EX USB Reference Guide The information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of 3M Touch Systems, Inc. 3M may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not give you license to these patents, trademarks, copyrights, or other intellectual property except as expressly provided in any written license agreement from 3M Touch Systems, Inc. The information provided in this document is intended as a guide only. For the latest detailed engineering specifications, please contact your 3M Touch Systems, Inc. Application Engineer. 3M Touch Systems, Inc. is committed to continually improving product designs. As a result, product specifications may be subject to change without notification. RoHS compliant 2011/65/E means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or (b) 0.01% (by weight) for cadmium. This information represents 3Ms knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. NOTICE: Given the variety of factors that can affect the use and performance of a 3M Touch Systems, Inc. product (the Product), including that solid state equipment has operation characteristics different from electromechanical equipment, some of which factors are uniquely within Users knowledge and control, it is essential that User evaluate the 3M Touch Systems, Inc. Product and software to determine whether it is suitable for Users particular purpose and suitable for Users method of application. 3M Touch Systems, Inc. statements, engineering/technical information, and recommendations are provided for Users convenience, but their accuracy or completeness is not warranted. 3M Touch Systems, Inc. products and software are not specifically designed for use in medical devices as defined by United States federal law. 3M Touch Systems, Inc. products and software should not be used in such applications without 3M Touch Systems, Inc. express written consent. User should contact its sales representative if Users opportunity involves a medical device application. IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems, Inc. Products and software are warranted to meet their published specifications from the date of shipment and for the period stated in the specification. 3M Touch Systems, Inc. makes no additional warranties, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems, Inc. Products and software are fit for Users particular purpose and suitable for its method of production, including intellectual property liability for User s application. If the Product, software or software media is proven not to have met 3M Touch Systems, Inc. warranty, then 3M Touch Systems, Inc. sole obligation and Users and Purchasers exclusive remedy, will be, at 3M Touch Systems, Inc. option, to repair or replace that Product quantity or software media or to refund its purchase price. 3M Touch Systems, Inc. has no obligation under 3M Touch Systems, Inc. warranty for any Product, software or software media that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing operations or assemblies by anyone other than 3M Touch Systems, Inc. 3M Touch Systems, Inc. shall not be liable in any action against it in any way related to the Products or software for any loss or damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theory asserted. 3M 2001-2011 All rights reserved. TM TM Document Title: 3M MicroTouch Controller EX USB Reference Guide Document Number: TSD-29489, Version F 3M, the 3M logo, MicroTouch, and the MicroTouch logo are either registered trademarks or trademarks of 3M in the United States and/or other countries. Windows and/or other Microsoft products referenced herein are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. All other trademarks are the property of their respective owners. 3M Touch Systems, Inc. Proprietary Information TSD-29489 REV F