3M MetPak 2-FB Socket 2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series End-to-end stackable Offset dual-beam contact minimizes insertion force Molded guide fingers provide integrated alignment Alignment wafer for true position Mates with MP2-P inverse headers and elevated inverse headers, MP2-PXXXE, for extended card applications Protective Push-Cap on Press-Fit Only Meets IEC 61076-4-104 Futurebus+ global standard See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: September 17, 2013 TS-1117-C Sheet 1 of 4 Physical Insulation: Material: High Temp LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 1.27 m) Nickel Wiping Area: See Ordering Information Solder Tails: See Ordering Information Electrical Signal: 1.5 A All contacts simultaneously Current Rating: 3 Insulation Resistance: 10 M 1000 V Withstanding Voltage: AC Environmental -55C to +125C Temperature Rating: 260C (Profile per J-STD-020C) Process Temperature Rating: 1 (per J-STD-020C) Moisture Sensitivity Level: MetPak is a trademark of 3M Company. UL File No.: E68080 Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M MetPak 2-FB Socket 2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series 33.0 5.00 1.30 TYP197 22.42 ROW .883 E D C B 14.50 11.30 A .571 13.30 .445 .524 POSITION 1 2 POSITION X 2.00 3.75 .079 TAIL LENGTH .148 4X 13.50 .532 23.0 .91 PRESS-FIT AND SOLDER TAIL PRODUCT (CAPPED) 21.95 .864 2.00 .079 TYP. 0.05 .05 23.30 .002 .002 .917 MATED WITH MP2-PXXXE-5XXX-XXXX 23.30 1.50 mm .917 .059 inch CENTER LINE OF ROW A Tolerance Unless Noted ASSEMBLED TO PCB AND MATED WITH MP2- 0 0.0 0.00 PXXX-5XXX-XXXX mm 3 0.3 0.13 Dimensions for Reference Only Notes: 1. Refer to IEC 61076-4-104 Futurebus+ global standard. 2. Press Fit describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a back plane. Ordering Information MP2 - SXXXG - 5XXX - C - XXXXX S = Socket Plating Options (See Table 3) Contact Count (See Table 1) C = Capped Solder Tail Blank = Press-Fit Guide Finger Tail Length Rows (See Table 2) 5 = 5 Rows Termination Style Contact Arrangement M = Solder Tail (Press Peg) 1 = All rows filled* P = Press-Fit (with Tail Cover) TS-1117-C *Contact 3M Sales Representative for information on special fill patterns and mono blocked pairs Sheet 2 of 4 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions