3M Particulate Respirator 8511, N95 Key Features NIOSH approved N95 rating Adjustable M-noseclip Braided headbands Dual point stapled headband attachment Cool Flow Exhalation Valve Do Not Use For Material Composition DO NOT use for gases and vapors, oil Straps Braided Polyisoprene aerosols, asbestos, arsenic, cadmium, Staples Steel lead, 4,4-methylene dianiline (MDA), or Nose Clip Aluminum abrasive blasting Filter Polypropylene DO NOT use for particulate Shell Polyester concentrations exceeding 10X Valve Polypropylene & Polyisoprene PEL/OEL This respirator contains no components DO NOT use in any manner not indicated made from natural rubber latex in the User Instructions Approximate weight of product: 0.55 oz. See the 3M Technical Bulletin - Cellulose Approvals and Standards Certification - Filtering Facepiece NIOSH approved N95 particulate Respirators for information about which respirator 3M respirators contain cellulose Meets NIOSH 42 CFR 84 N95 requirements for a minimum 95% Country of Origin filtration efficiency against solid and Made in the USA with globally sourced liquid aerosols that do not contain oil. materials NIOSH approval number: TC-84A-1299 Use For Assigned Protection Factor (APF 10) Use for solid particulates and liquid mists per US OSHA and Canada CSA in concentrations not exceeding 10X PEL/OEL Always follow User Instructions and use in manners as indicated Time Use Limitation Acceptable Fit Test Protocols Replace the respirator when it becomes Acceptable with dirty, damaged, or difficult to breathe Fit Test Protocol* this product through. Saccharin Shelf Life and Storage BitrexTM 5 years from the date of manufacture Qualitative Use By date on box in MM/YYYY format Irritant Protocols Store respirators in the original Smoke packaging, away from contaminated Isoamyl areas, dust, sunlight, extreme Acetate temperatures, excessive moisture, and Quantitative Protocols damaging chemicals Store in temperatures between -4F *Refer to OSHA 1910.134 (-20C) and +86F (+30C) and not exceeding 80% RH WARNING This respirator helps reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134, including training, fit testing and medical evaluation. In Canada, CSA standard Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and the User Instructions or call 3M PSD Technical Service in USA at 1-800- 243-4630 and in Canada at 1-800-267- 4414. Personal Safety Division 3M Center, Building 0235-2W-70 For More Information St. Paul, MN 55144-1000 Technical Assistance 1-800-243-4630 3M.com/workersafety Hours of Operation: M-Th 8am - 6pm, Fri 8am - 4:30 pm CST 3M 2018. All rights reserved. 3M PSD products are occupational use only.