9546 12MM 3M

Scotch-Mount Double Coated Polyethylene Foam Tape 9546 Product Data Sheet Updated : August 2001 Supersedes : New Product Description Polyethylene foam coated on both sides with a modified Acrylate pressure sensitive adhesive. Modified Acrylate Physical Properties Adhesive Type Not for specification purposes Foam Core Closed cell Polyethylene Foam 1.15 mm Thickness Siliconised white paper Release Liner 67 kg/m Density White Tape Colour 12 months from date of despatch by 3M when stored in the Shelf Life original carton at 21C (70F) & 50 % Relative Humidity Performance 180 Peel Adhesion to Characteristics stainless steel (FINAT- Not for specification purposes TM1) One side reinforced with PET Film. 18 N/25mm* 20 min dwell 18 N/25mm* Cohesive Failure 24 hours dwell Static Shear on Stainless Steel (FINAT- TM8) One side reinforced with PET Film. At 23C > 150 hours At 70C > 30 minutes -40C to +80C Temperature (Short Term 90C) Performance2 Date : August 2001 Double Coated Polyethylene Foam Tape 9546 1. Bond strength is surfaces must be clean dry Initial tape application to Application Techniques dependent upon the and well unified. A typical surfaces at temperatures amount of adhesive-to- surface cleaning solvent is below 10C (50F) is not surface contact developed. isopropyl alcohol. Use recommended because the Firm application pressure proper safety precautions adhesive becomes too firm develops better adhesive for handling solvents. to adhere readily. However contact & thus improves once properly applied low bond strength. 3. Ideal tape application temperature holding is temperature range is 21C generally satisfactory. 2. To obtain optimum to 38C (70F to 100F). adhesion, the bonding 3M and Scotch-Mount are trademarks of the 3M Company. Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations. 3M United Kingdom PLC 1996 Tapes & Adhesives 3M United Kingdom PLC Product Information : 3M Ireland Customer Service : 3M House, 3M House, Adelphi Centre, 28 Great Jackson Street, Tel 0870 60 800 50 Upper Georges Street, Tel (01) 280 3555 Manchester, Fax 0870 60 700 99 Dun Laoghaire,Co. Dublin, Fax (01) 280 3509 M15 4PA Ireland