N7E50-M516RB-50-WF 3M

3M CF Card Header CompactFlash Type II, Long Guides, Surface Mount 7E50 Series Headers mate with both CompactFlash Type I and Type II cards Polarization options for top or bottom boardmount Extended guide rails enable accurate and easy card insertion Single row surface mount solder tails facilitate auto placement and IR soldering Optional 2 mm board standoff enables board population Meets CFA standards for known compatibility and reliability Metal brace provides stability for ejector attachment Multiple styles of ejector available Optional ejector can be purchased pre-assembled or separately Optional Tape and Reel or Tray packaging for automated assembly See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) Date Modified: August 16, 2010 TS-2083-G Sheet 1 of 5 Physical Insulation: Material: High Temperature Thermoplastic Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 2.03 m [ 80 ] Nickel Wiping Area: 0.38 m [ 15 ] or 0.76 m [ 30 ] Gold Solder Tails: 3.81m [ 150 ] Matte Tin or Gold Flash 3M Logo Marking: Electrical 0.5 A Current Rating: 3 10 at 500 V Insulation Resistance: DC 500 V for 1 minute Withstanding Voltage: AC Environmental -40C to +85C Temperature Rating: Maximum 260 C (per J-STD-020C) Process Rating: 1 (per J-STD-020C) Moisture Sensitivity Level: CompactFlash is a registered trademark of Sandisk Corporation. 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M 3M CF Card Header CompactFlash Type II, Long Guides, Surface Mount 7E50 Series Pin Function L, Pin length Dim Pin Position Detect 3.50 mm [ .138 ] 25, 26 General Use 4.25 mm [ .167 ] All other pins Power 5.00 mm [ .197] 1, 13, 38, 50 6.40 35.00 6.40 .252 1.378 .252 -B- 31.12 -C- 1.225 1.27 .050 -A- 1.27 .050 0.3175 .0125 0.3175 .0125 0.23 0.05 0.635 3.00 50X 2X .009 .002 .025 .118 3.00 2X F 0.25 [.010] A B-C D .118 7.30 .287 L 10.0 E VPU PAD 21.80 0.40 0.02 2X 50X .858 .016 .001 25.10 2X 38.65 .25 .988 0.20 [.008] A B-C D 1.521 .010 LOGO 7.90 .311 40.16 1.581 -D- 45.40 1.787 47.80 1.882 49.94 E 1.966 PIN X PIN W H G mm 3.60 2X .142 (Inch) 2X K Tolerance Unless Noted .0 .00 .000 47.80 1.882 .20 .10 PIN Y mm .30 PIN Z [ ] Dimensions for Note: See TS-2154 for applicable ejectors and drawings of assembled ejectors and headers. Reference only Ordering Information (RIA E1 & C1 apply) N7E50 - X516XX - XX - XXX M = CF I & II, 31.60 mm, Normal Type, Metal Guide Pre-assembled Ejector Option: N = CF I & II, 31.60 mm, Inverse Type, Metal Guide Blank = No Ejector A = Right Dual Push Ejector (7E50-B516-05) C = Left Dual Push Ejector (7E50-B616-05) Plating Options: *Packaging Options: RA = 0.38 m [15 ] Gold with matte tin tail Blank = Standard White Polystyrene Trays RB = 0.76 m [30 ] Gold with matte tin tail WF = Tape and Reel (Automated Assembly) Board Standoff: EA = 0.38 um [15 ] Gold with Au Flash tail Note: WF option includes molded suction 40 = None cap for automated pick and place EB = 0.76 um [30 ] Gold with Au Flash tail 50 = 2.00 mm [ .079 ] TS-2083-G Sheet 2 of 5 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions