Frequency Translator / Jitter Attenuator RoHS ABFT Pb 5.00 x 7.00 x 2.0mm Compliant Moisture Sensitivity Level (MSL)This product is not Moisture Sensitive MSL = N/A: Not Applicable FEATURES: APPLICATIONS: Frequency translation, clock smoothing and jitter attenuation of the input 5x7x2 mm SMT, RoHS Compliant reflow-able package 10MHz reference Frequency translation to either 20MHz or 40MHz carrier +3.3V Supply Voltage Datacom - DSLAM, DSLAR, Access Nodes Industrial operating temperature range (-40C to +85C) Cable modem head end LVCMOS Output Base Station - GSM, CDMA Internal absolute pull range > 100 ppm allowing for long term drift correction Telecom - SONET/SDH/ATM GENERAL DESCRIPTION The ABFT series is an Ultra Low Jitter VCXO based frequency translator ideally suited to improve Jitter characteristics of the input signal. This device is designed to provide input clock smoothing - while providing Phase and Frequency Locked higher frequency translated output. Typical application will take a 10MHz reference frequency and phase & frequency lock it to either a 20MHz or a 40MHz Low Jitter VCXO. The implemented technology significantly attenuates the jitter content of the 10MHz reference signal while keeping the higher frequency RF Output - Frequency and Phase Coherent with the input 10MHz reference signal. STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes 20.000 Resonant Frequency Or MHz See options 40.00 Operating Temperature -40 +85 C Storage Temperature -40 +85 C Supply Voltage (Vdd) 3.135 3.3 3.465 V 3.3V5% Input signal must be Input Signal Characteristics with-in 20.00 ppm from 10.00MHz Frequency 9.999800 10.000000 10.000200 MHz carrier for the ABFT Signal level 0.300 3.3 Vp-p device to achieve lock Lock Time < 20 50 ms Referenced to the stable input reference of 10.00MHz (such as Frequency Stability Over Temperature -25.00 +25.00 ppb a Stratum-III TCXO (Note 1) or an OCXO) This is the internal pull range of the ABFT device providing sufficient correction range to Internal Frequency Pull Range 100.00 ppm account for internal aging, stand-alone temperature variation, etc. Supply Current (I ) < 14.0 20.00 mA Under Lock DD RF output Characteristics Output Load: 15 10 pF k Rise Time (Tr) 853 1200 ps Fall Time (Tf) 526 1200 ps Symmetry 45 48/52 55 % 1/2Vdd Output Voltage ( V ) 0.9*Vdd V OH Output Voltage ( V ) 0.1*Vdd V OL -5.0 +5.0 +25C First year Stand alone Aging (Note 2) ppm +25C After 10 -12.0 +12.0 years (Note 1):The frequency stability over temperature of the ABFT device is greatly dependant on the short term perturbations of the input reference signal. (Note 2):The Aging characteristics of the Quartz used inside the ABFT solution are such that, the stand-alone aging will not exceed 12.00 ppm over a 10-year product life referenced to the initial measured frequency post reflow in end application Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12 ABRACON IS ABRACON IS ISO9001:2008 30332 Esper anza, Ranch o Sant a Margarit a, California 92688 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 www . abraco n.co mFrequency Translator / Jitter Attenuator RoHS ABFT Pb 5.00 x 7.00 x 2.0mm Compliant Parameters Minimum Typical Maximum Units Notes Close to the carrier Phase Noise 20MHz carrier phase noise is dependent on the 1Hz offset from the carrier -56 cleanliness of the 10Hz offset from the carrier -87 input reference. 100Hz offset from the carrier -113 dBc/Hz However, at 1kHz 1,000Hz offset from the carrier -135 -130 offset and beyond, 10,000Hz offset from the carrier -151 -145 ABFT phase noise is 100,000Hz offset from the carrier -155 -150 practically 1,000,000Hz offset from the carrier -156 -150 independent of the 5,000,000Hz offset from the carrier -157 -155 input reference noise PHASE NOISE Phase Noise under lock (ABFT-20.00MHz with input connected to a DetailedComparative Phase Noise Plot low noise,stable 10.00MHz Stratum-IIIreference signal) (Stratum-III 10.0MHz as Reference) Stratum-III 10.00MHz low Noise Reference ABFT-20.00MHz Phase Noise under Lock Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.01.12 ABRACON IS ABRACON IS ISO9001:2008 30332 Esper anza, Ranch o Sant a Margarit a, California 92688 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 www . abraco n.co m