OVEN CONTROLLED CRYSTAL OSCILLATOR ESD Sensitive RoHS / RoHS II Compliant Pb AOCJY2 Series 21.0 x 21.0 x 11.0 mm FEATURES: APPLICATIONS: 21.0 x 21.0 x 11.0 mm Leaded- RoHS Compliant Reflow-able Package Cellular Infrastructure SC-Cut, High Q resonator based design Radar Systems Either Sinewave or CMOS RF output Test & Measurement Equipment Available with 30 ppb over -40C to +75C operating temperature range GPS Tracking with precision hold-over accuracy Tighter Stabilities to 5.0 ppb over 0C to +50C also available WiMax / WLAN Exceptional long-term Aging of 500 ppb max. over 10-Year Product Life Excellent close-in phase noise (-140 dBc/Hz Max. 100Hz offset 10MHz carrier) STANDARD SPECIFICATIONS: Notes Parameters Minimum Typical Maximum Units Notes RF Output Overall Frequency Frequency 10.00 100.00 MHz range Standard Available Frequencies 10.00, 12.80, 13.00, 26.00, 38.88, 40.00, 100.00 MHz Waveform CMOS Level1 (Logic High) 0.9*Vdd Volts Level0 (Logic Low) 0.1*Vdd Volts Load 15 pf Rise & Fall Time 6.0 ns Duty Cycle 45 55 % Waveform Sinewave Peak Power 2.00 dBm Output Load 50 -10 Short Term Stability /second Alan Variance 2x10 See Stability Operable Temperature Range -40 75 C Options Frequency Stability Options 0 C to +50C (Note 1) 5.00 ppb Default Spec. -20 C to +70C 10.00 ppb Option E -40 C to +75C 30.00 ppb Option F Frequency Stability vs. Supply 5.00 ppb Voltage (Vdd 5%) Frequency Stability vs. Load 5.00 ppb Variation ( 10%) Warm-Up 25 C 100.00 ppb In < 3-minutes Power Consumption turn on 3.00 Watts Power Consumption Steady State 1.00 Watts Supply Voltage (Vdd) 3.13 3.30 3.46 Volts See Options Note 1: 5.00 ppb stability is only available for F0 < 40MHz. For frequencies above 40MHz, the best available frequency stability is 10.00 ppb over -20C to +70C Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 ww w .abrac on.c omOVEN CONTROLLED CRYSTAL OSCILLATOR ESD Sensitive RoHS / RoHS II Compliant AOCJY2 Series Pb 21.0 x 21.0 x 11.0 mm STANDARD SPECIFICATIONS - continued. Parameters Minimum Typical Maximum Units Notes Aging Daily 1.0 ppb First Year 100 ppb 10-Years 500 ppb Spectral Content Spurious Response -35 dBc Phase Noise (10MHz Carrier) 5V 1 Hz offset -90 dBc 10 Hz offset -120 dBc 100 Hz offset -140 dBc 1,000 Hz offset -145 dBc 10,000 Hz offset -150 dBc Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Vdd Volts Frequency Pull Range 0.70 ppm Frequency Pull Slope Positive Control Voltage Port Control Voltage Port Impedance 10 k Impedance Center Control Center Control Voltage (Vdd/2) -0.5 Vdd/2 (Vdd/2) +0.5 Volts Voltage 2.70 2.80 2.90 Volts Output Pin 5 Reference Voltage (Vdd=3.3V) 4.40 4.50 4.60 Volts Output Pin 5 Reference Voltage (Vdd=5.0V) Storage Temperature -40 +100 C OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY2 - - MHz - - Supply Voltage Option Blank : 3.30V RF Output Options A : 5.00V Blank : CMOS SW : Sinewave Frequency in MHz Temperature Options Such as 10.000 MHz E : -20C to +70C 26.000 MHz F : -40C to +75C 100.000 MHz Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.12.14 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 ww w .abrac on.c om