SMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series RoHS/RoHS II compliant Pb 25.4 x 22.1 x 12.7 m m Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = 1 FEATURES: APPLICATIONS: Cellular Infrastructure 25.4 x 22.1 x 12.7 mm True SMT- RoHS Compliant Reflow-able Package SC-Cut, High Q resonator based design Radar Systems Either Sinewave or CMOS RF output Test & Measurement Equipment Available with 30 ppb over -40C to +75C operating temperature Range GPS Tracking with precision hold-over accuracy Tighter Stabilities to 5.0 ppb over 0C to +50C also available WiMax / WLAN Exceptional long-term Aging of 500 ppb over 10-Year Product Life Excellent close-in phase noise (-135 dBc/Hz Typical 100 Hz offset from 10MHz carrier) STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes RF Output 10.00 100.00 MHz CMOS output Frequency 10.00 100.00 MHz Sinewave output 10.00, 12.80, 13.00, 16.384, 20.00, 26.00, 38.40, Standard Available Frequencies 38.88, 40.00, 100.00 MHz Operable Temperature Range 0 50 C See Stability Options Frequency Stability Options 0 C to +50C 5.00 ppb Default Spec. -20 C to +70C 10.00 ppb Option E -40 C to +75C 30.00 ppb Option F Frequency Stability vs. Supply 20.00 ppb Voltage (Vdd 5%) 100.00 ppb In < 3-minutes Warm-Up 25 C Power Consumption turn on 3.60 Watts Power Consumption Steady State 1.40 Watt Supply Voltage (Vdd) 3.135 3.30 3.465 Volts See Options 2.60 2.80 3.00 Volts For Vdd=+3.3V version Reference Voltage (Vref) (available as an output to facilitate oscillator tuning) 4.30 4.50 4.70 Volts For Vdd=+5.0V version Aging Daily aging (after 30 days) 1.0 ppb Yearly 100 ppb 10-Years 500 ppb Waveform LVCMOS Level1 (Logic High) 0.9*Vdd Volts Level0 (Logic Low) 0.1*Vdd Volts Load 15 pf Rise & Fall Time 5.0 ns Duty Cycle 45 55 % Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 ww w .abrac on.c omSMD OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY Series RoHS/RoHS II compliant Pb 25.4 x 22.1 x 12.7 m m STANDARD SPECIFICATIONS contd. Parameters Minimum Typical Maximum Units Notes Waveform Sinewave Peak Power 2.00 dBm Output Load 50 Spectral Content Spurious Response -70 dBc Phase Noise 10MHz Carrier (Vdd=3.3V) 1 Hz offset -90 dBc / Hz 10 Hz offset -120 dBc / Hz 100 Hz offset -135 dBc / Hz 1,000 Hz offset -145 dBc / Hz 10,000 Hz offset -150 dBc / Hz 100,000 Hz offset -150 dBc / Hz 1,000,000 Hz offset -150 dBc / Hz Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Vdd Volts Frequency Pull Range 0.7 ppm Frequency Pull Slope Positive Control Voltage Port Impedance 10 k Center Control Voltage (Vdd/2) -0.5 Vdd/2 (Vdd/2) +0.5 Volts OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY - - MHz - - Supply Voltage Option Frequency in MHz Temperature Options RF Output Options Blank: 3.30V5% Such as 10.000 MHz Blank: 5.0ppb/0C to+50C Blank: CMOS A: 5.00V5% 26.000 MHz E: 10.0ppb/-20C to +70C SW: Sinewave 100.000 MHz F: 30.0ppb/-40C to +75C OUTLINE DIMENSIONS Recommended Soldering Pattern Pin Function 1 Control Voltage 2 VREF 3 Supply Voltage 4 RF-output 5 Ground. Case Dimensions: Inches (mm) Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.24.13 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 ww w .abrac on.c om