OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY4 Series RoHS 36.1x 27.2 x 13mm Pb Compliant APPLICATIONS: FEATURES: 36.1x 27.2 x 13mm Leaded- RoHS Compliant Reflow-able Package Cellular Infrastructure SC-Cut, High Q resonator based design Radar Systems Either Sinewave or CMOS RF output Test & Measurement Equipment Available with 10 ppb over -40C to +75C operating temperature Range GPS Tracking with precision hold-over accuracy Tighter Stabilities to 2.0 ppb over 0C to +50C also available WiMax / WLAN Exceptional long-term Aging of 500 ppb max. over 10-Year Product Life Excellent close-in phase noise (-140 dBc/Hz Typical 100 Hz offset 10MHz carrier) STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes RF Output Overall Frequency Frequency 10.00 40.00 MHz range Standard Available Frequencies 10.00, 12.80, 13.00, 26.00, 38.88, 40.00 MHz Waveform CMOS Level1 (Logic High) 4.50 Volts Level0 (Logic Low) 0.50 Volts Load 15 pf Rise & Fall Time 6.0 ns Duty Cycle 45 55 % Waveform Sinewave Peak Power 2.00 dBm Output Load 50 -10 Short Term Stability 1x10 /second Alan Variance See Stability Operable Temperature Range -40 75 C Options Frequency Stability Options 0 C to +50C (Note 1) 2.00 ppb Default Spec. -20 C to +70C 10.00 ppb Option E -40 C to +75C 10.00 ppb Option F Frequency Stability vs. Supply Voltage (Vdd 5%) 1.00 ppb Frequency Stability vs. Load Variation ( 10%) 1.00 ppb Warm-Up 25 C 100.00 ppb In < 3-minutes Power Consumption turn on 4.00 Watts Power Consumption Steady State 1.50 Watts Supply Voltage (Vdd) 4.75 5.00 5.25 Volts See Options Note 1: 2.00 ppb stability is only available for F0 < 13MHz. For frequencies above 13MHz, the best available frequency stability is 10.00 ppb over -20C to +70C Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.24.11 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 ww w .abrac on.c omOVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY4 Series RoHS 36.1x 27.2 x 13mm Pb Compliant STANDARD SPECIFICATIONS - continued. Parameters Minimum Typical Maximum Units Notes Aging Daily 1.0 ppb First Year 100 ppb 10-Years 500 ppb Spectral Content Spurious Response -35 dBc Phase Noise (10MHz Carrier) 5V 1 Hz offset -90 dBc 10 Hz offset -120 dBc 100 Hz offset -140 dBc 1,000 Hz offset -145 dBc 10,000 Hz offset -150 dBc Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 5.00 Volts Frequency Pull Range 0.700 ppm Frequency Pull Slope Positive Control Voltage Port Impedance 10 k Center Control Voltage 2.00 2.50 3.00 Volts Control Port Linearity 10 % Reference Voltage (Vdd=5.0V) 4.40 4.50 4.60 Volts Output Pin 2 Reference Voltage (Vdd=12.0V) 4.90 5.00 5.10 Volts Output Pin 2 Storage Temperature -40 +100 C OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY4 - - MHz - - Supply Voltage Option A: 5.00V RF Output Options B: 12.00V Blank: CMOS SW: Sinewave Frequency in MHz Temperature Options Such as 10.000 MHz E: -20C to +70C 26.000 MHz F: -40C to +75C 40.000 MHz Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.24.11 ABRACON IS ABRACON IS 30332 Espe ranza, Ranc ho Sant a Margarit a, California 92688 ISO9001:2008 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 ww w .abrac on.c om