AOCTQ5-X-10.000MHz-M10-SW ABRACON

Oven Controlled Crystal Oscillators AOCTQ5 Pb RoHS/RoHS II compliant ESD Sensitive 36.1 x 27.1 x 12.1 mm Leaded FEATURES: APPLICATIONS: 36.1x 27.1 x 12.1mm Leaded- RoHS Compliant Package COTS Military & Industrial Radios & Timing Circuits SC-Cut, High Q resonator based design Cellular Infrastructure Either CMOS or Sinewave output Radar Systems Tight frequency stability: Test & Measurement Equipment 3 ppb accuracy over -40C to +85C temperature range GPS Tracking with precision hold-over accuracy 5 ppb accuracy over -55C to +85C temperature range WiMax / WLAN Excellent close-in phase noise (-145 dBc/Hz max. 1kHz offset 10MHz carrier) Ideal for Low-g-Sensitivity Designs (0.3 ppb/g maximum) STANDARD SPECIFICATIONS: Parameters Min. Typ. Max. Units Notes RF Output Frequency 10.00 MHz Supply Voltage (Vdd) 5 Vdc 5 W During Warming-up Power Consumption Steady-State +25C & 1.6 W under still air Waveform Sinewave Output Level +7 +14 dBm Harmonics -35 dBc Spurious -70 dBc Output Load 50 Waveform HCMOS V 2.4 V OH With Load =15pF V 0.4 V OL Duty Cycle 45 55 % (V V )/2 OH OL Rise/Fall Time 6 ns With Load =15pF Output Load 15 pF Storage Temperature Range -55 +125 C Initial Frequency Tolerance 10 ppb At shipment, nominal EFC -11 Short-term Stability (1 sec) 5 x 10 Test after 15 minutes +25C, with-in 5ppb of Warm-up Time 10 Minutes final frequency G-Sensitivity 0.3 ppb/g Frequency Stability vs. Temp. Available Options 3 ppb Option I3 -40 C to +85C 5 ppb Option I5 5 ppb Option M5 -55 C to +85C 10 ppb Option M10 Frequency Stability vs. Supply 3 ppb Voltage (Vdd 5%) Frequency Stability vs. Load 3 ppb Variation (Load 5%) Aging Per Day 0.5 ppb After 30 days in operation Per Year 50 ppb 2 Faraday, Suite B Irvine CA 92618 Revised: 07.21.15 ABRACON IS ABRACON IS Ph. 949.546.8000 Fax. 949.546.8001 ISO9001:2008 LLC CECERRTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of SaleOven Controlled Crystal Oscillators AOCTQ5 Pb RoHS/RoHS II compliant ESD Sensitive 36.1 x 27.1 x 12.1 mm Leaded STANDARD SPECIFICATIONS: Parameters Min. Typ. Max. Units Notes Phase Noise (10MHz Carrier) +25C 10 Hz offset -12 0 dBc/Hz 100 Hz offset -14 0 dBc/Hz 1,000 Hz offset -14 5 dBc/Hz 10,000 Hz offset -15 5 dBc/Hz 100,000 Hz offset -16 0 dBc/Hz For Voltage Control Option Electrical Frequency Adjustment only Control Voltage Range (Vc) 0 5 Vdc To be with-in 10 ppb from Center Control Voltage (Vc) 2.30 2.50 2.70 Vdc 10.000MHz (as received) Frequency Pull Range 500 ppb Frequency Pull Slope Positive Maximum Ratings Parameters Min. Typ. Max. Units Notes Supply Voltage (Vdd) -0.3 15 V Control Voltage (Vc) 0 5 V ESD, HBM/CDM/MM 3kV/1kV/200V PART IDENTIFICATION: AOCTQ5 - -10.000 MHz - - Fixed or Voltage Operating Temp. Frequency Stability (ppb) Output Type Controlled Range 3 5 10 X = Fixed -40C to +85C I3 I5 Blank: CMOS V = Voltage Controlled -55C to +85C M5 M10 SW: Sinewave 2 Faraday, Suite B Irvine CA 92618 Revised: 07.21.15 ABRACON IS ABRACON IS Ph. 949.546.8000 Fax. 949.546.8001 ISO9001:2008 LLC CECERRTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale