ULTRAVOLT HVA SERIES PRECISION HIGH VOLTAGE AMPLIFIER The UltraVolt HVA series of DC-to-DC high voltage power supplies operates a precision filter/ divider and linear HV switch to produce a high voltage amplifier (HVA). These modules provide a high-resolution, programmable, high voltage DC to full scale waveform capability greater than 1 kHz output. This is optimized for bias applications while providing excellent line regulation, load regulation, dynamic response, and stability. It can both source and sink current. PRODUCT HIGHLIGHTS DC, reversible, and amplifier modes 50 ppm temperature coefficient (25 ppm optional) Fast slew rate (40 V/s) and high bandwidth Available reduced ripple option Can both source and sink current Differential precision 0 to 10 VDC control input Bipolar models available at 0 to 5 kV Precision output voltage and current monitors Unipolar models available at 0 to 10 kV UL/cUL recognized component CE Mark (LVD and RoHS) PPM level line and load regulation TYPICAL APPLICATIONS Drivers Amplifiers Beam devices such as mass spectrometers and electron PZT actuators Pockels cells microscopes as electrostatic deflection/focusing, MEMS devices Laser and electro-optic flocking, coating, electrospinning, precipitation, and modulation Electroactive polymers electrocoalescence Electrophoresis Electrorheological materials Electrohydrodynamics Electrostatic chuck 2018 Advanced Energy Industries, Inc.ULTRAVOLT HVA SERIES ELECTRICAL SPECIFICATIONS Parameter Conditions Models Units Input All Types Voltage Range Full Power 24 VDC 10% VDC Current Standby/Disable < 70 unipolar, < 105 bipolar mA Current Full Load, Max Eout < 420 mA Current No Load, Max Eout < 400 mA Output 1 1 kV/1 kV 2 kV/2 kV 4 kV/4 kV 5 kV 6 kV 10 kV Power Nominal Input, Max Eout 0.25 0.5 1 1 1 1 W Current Iout Entire Voltage Range 250 250 250 200 167 100 A Ripple Full Load, Max Eout 0.05 0.05 0.05 0.03 0.03 0.01 %V pp Ripple with -F Option Full Load, Max Eout 0.0125 0.0125 0.0125 0.0075 0.0075 0.0025 %V pp Voltage Monitor Normal Operating Conditions 0 to 10 0.5% VDC Current Monitor Normal Operating Conditions 0 to 10 1% VDC Line Regulation Vin Min to Vin Max, Max Eout < 0.01 % Load Regulation No Load to Full Load, Max Eout < 0.01 % Programming and Controls All Types Input Impedance Normal Operating Conditions 10 M Adjust Voltage Differential 0 to +10 VDC HV ON/OFF (Enable/Disable) 0 to +0.8 V disable, +2.5 to +10 enable (default = disable) VDC Reference Voltage T = +25C, Initial Value +10.00 0.05% VDC Max Source Current T = +25C 5 mA Environmental All Types Operating Full Load, Max Eout, Case Temp. +10 to +45 C Temperature Coefficient Over the Specified Temperature 50 PPM or 25 PPM PPM/C Thermal Shock Mil-Std 810, Method 503.4-2 -40 to +65 C Storage Non-Operating, Case Temp. -40 to +100 C Humidity All Conditions, Standard Package 0 to 95%, non-condensing - Altitude Standard Package, All Conditions Sea level through 10,000 ft Shock Mil-Std-810, Method 516, Proc. 4 20 Gs Vibration Mil-Std-810, Method 514, Fig. 514-3 10 Gs 1 Units listed without polarity can be ordered as positive (+) or negative (-). Units listed as () are bipolar. Contact AE for preset fixed outputs or other requirements. 2 advanced-energy.com