ULTRAVOLT 10HVA 20HVA SERIES PRECISION HIGH VOLTAGE AMPLIFIER = The UltraVolt 10HVA 20HVA series of DC-to-DC high voltage power supplies operates a precision filter / divider and linear HV switch to produce a high voltage amplifier (HVA). These modules provide a high-resolution, high voltage DC to full scale waveform capability greater than 500 Hz output. 10/15/20 kV HVA modules are optimized for bias applications while providing excellent line regulation, load regulation, dynamic response, and stability. The HVA series can both source and sink current operating linearly through 0 V with low ripple and noise over the entire output range. PRODUCT HIGHLIGHTS 50 ppm temperature coefficient (25 ppm optional) Bipolar models available at 0 to 10 kV, 15 kV, 20 kV Reduced ripple option available Unipolar models available at 0 to 15 kV and 20 kV Differential precision 0 to 10 VDC control input Operates in DC, reversible, and amplifier modes Precision voltage and current monitors Fast slew rate and high bandwidth at an excellent value RoHS Compliant Can both source and sink current PPM level line and load regulation TYPICAL APPLICATIONS Amplifiers Drivers Ion beam and electron beam devices such as mass Electrohydrodynamics spectrometry, and electron microscopes as well as Electrostatic chuck electrostatic deflection/focusing, flocking, coating, Pockels cells electrospinning, precipitation, and electrocoalescence Laser and electro-optic modulation Electrophoresis 2019 Advanced Energy Industries, Inc.ULTRAVOLT 10HVA 20HVA SERIES ELECTRICAL SPECIFICATIONS Parameter Conditions Models Units Input All Types Voltage Range Full Power 24 VDC 10% VDC Current Standby / Disable <70 unipolar, <105 bipolar mA Current Full Load, Max Eout 750 Bipolar-1 W=850/1.5 W=900 Bipolar-1 W=950/2 W=1025 mA Unipolar-1 W=650/1.5 W=700 Unipolar-1 W=750/2 W=825 Current No Load, Max Eout 675 Bipolar-1 W=775/1.5 W=825 Bipolar-1 W=875/2 W=950 mA Unipolar-1 W=575/1.5 W=625 Unipolar-1 W=675/2 W=750 1 Output 10 kV 15 kV/15 kV 20 kV/20 kV Power Nominal Input, Max Eout 1 1 1.5 1 2 W Current Iout Entire Voltage Range 100 66 100 50 100 uA Ripple Full Load, Max Eout 0.05 0.05 0.05 0.05 0.05 %V pp Ripple with -F Option Full Load, Max Eout 0.0125 0.0125 0.0125 0.0125 0.0125 %V pp Voltage Monitor Normal Operating Conditions 0 to 10 0.5% VDC Current Monitor Normal Operating Conditions 0 to 10 1% VDC Line Regulation Vin Min to Vin Max, Max Eout <0.01 % Load Regulation No Load to Full Load, Max Eout <0.01 % Programming and Controls All Types Input Impedance Normal Operating Conditions 10 M Adjust Voltage Differential 0 to +10 VDC HV ON/OFF (Enable/Disable) 0 to +0.8 V Disable, +2.5 to +10 Enable (Default = Disable) VDC Reference Voltage +10.00 0.05% VDC Max Source Current 1 mA Environmental All Types Operating Full Load, Max Eout, Case Temp. +10 to +45 C Temperature Coefficient Over the Specified Temperature 50 ppm or 25 ppm (Optional) ppm/C Storage Non-Operating, Case Temp. -40 to +100 C Humidity All Conditions, Standard Package 0 to 95% non-condensing - Altitude Standard Package, All Conditions Sea Level through 10,000 ft Shock Mil-Std-810, Method 516, Proc. 4 20 Gs Vibration Mil-Std-810, Method 514, Fig. 514-3 10 Gs 1 Units listed without polarity can be ordered as positive (+) or negative (-). Units listed as () are bipolar. 2 advancedenergy.com