8 A SERIES High Voltage Biasing Supply The A Series of high-voltage regulated DC-DC converters addresses the needs of the miniature PCB-mount regulated high voltage power supply user. Designed and built utilizing state-of- the-art power-conversion topology, these units feature surface- mount technology and encapsulation techniques that provide high reliability and performance. Typical applications for the A Series include the following: bias supplies, electrostatic detectors, mass spectrometry, and photomultiplier tubes (PMTs). 8 models from 0 to 62V through 0 to 6kV Indefinite output short-circuit protection 4, 20 or 30 watts of output power Output current monitor Maximum Iout capability down to 0 Volts Fixed-frequency, low-stored-energy design Wide input voltage range >430,000 hour MTBF 65C Available with Ripple Stripper Filter (-F Option) UL, cUL, CE, IEC-60950-1, and Demko Recognized Parameter Conditions models Units iPUn t 12V 24V Voltage Range Full Power + 11 to 16 + 23 to 30 VDC Voltage Range Derated Power Range + 9 to 32 + 9 to 32 VDC Current Standby / Disable < 30 < 30 mA Current No Load, Max Eout < 100 < 90 mA Current Max Load, Max Eout ~ 400 ~ 1350 mA AC Ripple Current Nominal Input, Full Load < 80 < 80 mA p-p oUPUt t 1/16a 1/8a 1/4a 1/2a 1a 2a 4a 6a Voltage Range Nominal Input 0 to 62 0 to 125 0 to 250 0 to 500 0 to 1,000 0 to 2,000 0 to 4,000 0 to 6,000 VDC Nominal Input Voltage 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 12 24 24 VDC Power Nominal Input, Max Eout 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 4 20 30 Watts Current Iout Entire Output Voltage Range 64 320 480 32 160 240 16 80 120 8 40 60 4 20 30 2 10 15 1 5 7.5 0.67 3.3 5 mA Current Monitor Scaling Full Load TBD TBD TBD 438.4 1860.5 2891.5 213.3 1000 1481.5 123.1 506.3 740.7 55.56 243.9 400 31.75 129.9 211.3 16.4 66.7 85.2 12.9 48.5 56.8 mA/V Voltage Monitor Scaling With -Y5 option 10:1 2% into 10M 100:1 2% into 10M - Ripple Full Load, Max Eout .02 .03 .05 .013 .015 .016 .01 .04 .048 .001 .02 .017 .038 .071 .15 .01 .05 .065 .019 .057 .022 .018 .073 .112 %V p-p Ripple with -F-M Option* Full Load, Max Eout, 300pF bypass Cap .002 .004 .006 .0048 .0056 .006 .0052 .0028 .005 .001 .0138 .0016 .001 .0008 .002 .0007 .0038 .004 .0004 .0088 .0026 .0003 .0012 .004 %V p-p Dynamic Load Regulation to Full Load, Max Eout per .1mA <.12 <.12 <.12 <.12 <.12 <.12 <.20 <.20 <.20 <.50 <.50 <.50 <1.0 <1.0 <1.0 <2.0 <2.0 <2.0 <4.0 <4.0 <4.0 <6.0 <6.0 <6.0 V pk Line Regulation Nom. Input, Max Eout, Full Power < 0.01 % VDC Static Load Regulation No Load to Full Load, Max Eout < 0.01% VDC Stability 30 Min. warmup, per 8 hr/ per day < 0.01% / < 0.02% VDC Pogramming r & Controls all YPt es Input Impedance Nominal Input + Output Models 1.1M to GND, - Output Models 1.1M to +5 Vref M Adjust Resistance Typical Potentiometer Values 10K to 100K (Pot across Vref. & Signal GND, Wiper to Adjust) Adjust Logic 0 to +5 for +Out, +5 to 0 for - Out +4.64 VDC for +Output or +0.36 for -Output = Nominal Eout - Output Voltage & Impedance T=+25C + 5.00VDC 2%, Zout = 464 1% - Enable/Disable 0 to +0.5 Disable, +2.4 to 32 Enable (Default = Enable) VDC enVironmental standard -25PPm oPtion Operating Full Load, Max Eout, Case Temp. -40 to +65 +10 to +45 C Coefficient Over the Specified Temperature PPM/C 50 +25 Thermal Shock Mil-Std 810, Method 503-4, Proc. II -40 to +65 C Storage Non-Operating, Case Temp. -55 to +105 C Humidity All Conditions, Standard Package 0 to 95% non-condensing - Altitude Standard Package, All Conditions Sea Level through Vacuum (Vacuum may require -P1 or -S1 options, contact factory for details.) - Shock Mil-Std-810, Method 516.5, Proc. IV 20 (Standard), 40 (-C Option) Gs Vibration Mil-Std-810, Method 514.5, Fig.14.5C-3 10 (Standard), 20 (-C Option) Gs Specifications subject to change without notice. *Note: For additional information on the reduced ripple option, see -F Option datasheet. 2010, UltraVolt Inc. Making High Voltage Easier All rights reserved. ULTRAVOLTRev. Z 9/10 9 A SERIES High Voltage Biasing Supply ConstrUCtion ard Caseandts Epoxy-filled DAP box certified to ASTM-D-5948 with -C Option: Aluminum Alloy 5052-H32, Finish: MIL-A-8625 Type II (Anodizing) size Volume 4.30in (70.5cc), w/ -C Option: 8.00in (131.1cc) Weight 5.0oz (142g), w/ -C Option: 10.0oz (284g) t Coleran e Overall 0.050 (1.27) Pin to Pin 0.015 (0.38) Mounting hole location 0.025 (0.64) steno 20W and 30W versions are an additional 0.062 (1.57) in height. -M equipped units are an additional 0.030 (0.76) for each dimension. Contact UltraVolts Customer Service Department for drawings of models equipped with -E or -H options. with -C oPtion Downloadable drawings (complete with mounting & pin information) and 3D models are available online. IEC-60950-1 ordering information 0 to 62 VDC Output 1/16A 0 to 125 VDC Output 1/8A 0 to 250 VDC Output 1/4A 0 to 500 VDC Output 1/2A Type 0 to 1,000 VDC Output 1A 0 to 2,000 VDC Output 2A 0 to 4,000 VDC Output 4A 0 to 6,000 VDC Output 6A 12VDC Nominal 12 Input Non-RoHS compliant units are 24VDC Nominal 24 available. Please contact the Positive Output -P factory for more information. Polarity Negative Output -N Watts Output (12 V Only) 4 Power Watts Output (24 V Only) 20 ConneCtions Watts Output (24 V Only) 30 Pin Uf nCtion Plastic Case - Diallyl Phthalate (Standard) 1 Input-Power Ground Return Case Eared Chassis Mounting Plate -E 2 Positive Power Input RF-Tight Aluminum Case -C 3 Iout Monitor Heat Sink .400 High (sized to fit case) -H 4 Enable/Disable Ripple Stripper Integral Output Filter* -F 5 Signal Ground Return Shield Six-sided Mu-Metal Shield -M 6 Remote Adjust Input Voltage Monitor Optional Eout Monitor -Y5 7 +5VDC Reference Output Iout Monitor Boost Boosted Iout Monitor Signal Level -Y10 8 HV Ground Return Temp. Coefficient 25PPM Temperature Coefficient -25PPM 9 HV Ground Return or Eout Monitor (-Y5) *Note: For additional information on the reduced ripple option, see -F Option 10 & 11 HV Output datasheet. All grounds joined internally. Power-supply mounting Example: points isolated from internal grounds by >100k, 1/2A12-P4-M .01uF / 50V (Max) on all models except -M, -C, and Voltage Option (Mu-Metal) -M-E configurations which are 0. Type Model Power Popular accessories ordered with this product include CONN-KIT and BR-1 mounting bracket kit. Input Polarity 1800 Ocean Avenue, Ronkonkoma, NY 11779 Making High Voltage Easier Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT