SINGLE OUTPUT HIGH VOLTAGE MODULES 19 30A-40A SERIES 30kV to 40kV High Voltage Biasing Supplies The 30A-40A Series of regulated, high-voltage DC-DC converters are an extension of the A Series, directly addressing the needs of the miniature PCB or chassis-mount 30kV application. Designed and built utilizing state-of-the-art power conversion topology, these units feature surface-mount technology and encapsulation techniques providing high reliability and low cost. Typical applications for the 30A-40A Series include the following: electrostatic discharge testers, plasma, electrostatic, x-ray, and wire testers. 0 to 30kV, 35kV or 40kV output Output current & voltage monitors 4, 15 or 30 watts of output power Fixed-frequency, low-stored-energy design Maximum Iout capability down to 0 Volts >400,000 hour MTBF 65C Wide input voltage range UL/cUL Recognized Component CE Mark (LVD & RoHS) Indefinite output short-circuit protection PARAMETER CONDITIONS MODELS UNITS INPUT 12V 24V Voltage Range Full Power + 11 to 16 + 23 to 30 VDC Voltage Range Derated Power Range + 9 to 32 + 9 to 32 VDC Current Standby / Disable < 30 < 30 mA Current No Load, Max Eout 30A < 0.25, 35A < 0.35, 40A < 0.38 30A < 0.30, 35A < 0.20, 40A < 0.38 A Current Max Load, Max Eout ~ 800 ~1800 mA AC Ripple Current Nominal Input, Full Load < 80 < 80 mA p-p OUTPUT 30A 35A 40A Voltage Range Nominal Input 0 to 30,000 0 to 35,000 0 to 40,000 VDC Nominal Input Voltage / Model 12 24 24 12 24 24 12 24 24 VDC Power Nominal Input, Max Eout 4 15 30 4 15 30 4 15 30 Watts Current Iout Entire Output Voltage Range 0.13 0.50 1.0 0.11 0.42 0.86 0.10 0.37 0.75 mA Current Scale Factor Full Load .140 .173 .181 .158 .179 .184 .077 .089 .092 mA/V Voltage Monitor Scaling 1000:1 2% into 10M - Ripple Full Load, Max Eout, 300pF bypass Cap. 0.025 0.039 0.058 0.025 0.040 0.075 0.030 0.060 0.064 %V p-p Ripple with -F-M Option Full Load, Max Eout, 300pF bypass Cap. 0.021 0.028 0.048 0.016 0.034 0.040 0.007 0.025 0.053 %V p-p Dynamic Load Regulation to Full Load, Max Eout per 0.1mA <10.0 <10.0 <10.0 <10.0 <10.0 <10.0 <10.0 <10.0 <10.0 V pk Line Regulation Nom. Input, Max Eout, Full Power < 0.01 % VDC Static Load Regulation No Load to Full Load, Max Eout < 0.01% VDC Stability 30 Min. warmup, per 8 hr/ per day < 0.01% / < 0.02% VDC PROGRAMMING & CONTROLS ALL TYPES Input Impedance Nominal Input + Output Models 1.1M to GND, - Output Models 1.1M to +5 Vref M Adjust Resistance Typical Potentiometer Values 10K to 100K (Pot across Vref. & Signal GND, Wiper to Adjust) Adjust Logic 0 to +5 for +Out, +5 to 0 for - Out +4.64 VDC for +Output or +0.36 for -Output = Nominal Eout - Output Voltage & Impedance T=+25C + 5.00VDC 2%, Zout = 464 1% - Enable/Disable 0 to +0.5 Disable, +2.4 to 32 Enable (Default = Enable) VDC ENVIRONMENTAL STANDARD -25PPM Operating Full Load, Max Eout, Case Temp. -40 to +65 +10 to +45 C Coefficient Over the Specified Temperature PPM/C 50 25 Thermal Shock Mil-Std 810, Method 503-4, Proc. II -40 to +65 C Storage Non-Operating, Case Temp. -55 to +105 C Humidity All Conditions, Standard Package 0 to 95% non-condensing - Altitude Standard Package, All Conditions Sea Level through Vacuum (Vacuum may require -P2 option, contact factory for details.) - Shock Mil-Std-810, Method 516.5, Proc. IV 20 (Standard), 40 (-C Option) Gs Vibration Mil-Std-810, Method 514.5, Fig.514.5C-3 10 (Standard), 20 (-C Option) Gs Specifications subject to change without notice. Higher Service, Higher Performance, Higher Reliability Making High Voltage Easier 2011, UltraVolt Inc. All rights reserved. ULTRAVOLTSINGLE OUTPUT HIGH VOLTAGE MODULES 20 30A-40A SERIES High Voltage Biasing Supply 30kV to 40kV High Voltage Biasing Supplies 30A-35A SERIES 40A SERIES CONSTRUCTION TOLERANCE Overall 0.050 (1.27) Epoxy-filled DAP box certified to ASTM-D-5948 with -C Option: Pin to Pin 0.015 (0.38) Aluminum Alloy 5052-H32, Finish: MIL-A-8625 Type II (Anodizing) Mounting hole locations 0.025 (0.64) SIZE NOTES Volume: -M equipped units are an additional 0.030 (0.76) for each dimension. 30A/35A: 12.66 in (207.46cc), w/-C Option 20.00 in (327.80cc) Contact UV Customer Service for drawings of models equipped 40A: 17.92 in (293.66cc), w/-C Option 27.00 in (442.53cc) with -E , -C, or -H options. Weight: 30A/35A: 15.00 oz (425.24g), w/-C Option 22.00 oz (623.69g) 40A: 21.00 oz (595.34g), w/-C Option 30.00 oz (850.49g) Downloadable drawings (complete with mounting & pin information) and 3D models are available online. 1800 Ocean Avenue, Ronkonkoma, NY 11779 Making High Voltage Easier Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT