EXCELSYS COOLX 1000 FANLESS, INTELLIGENT 1000 W MODULAR POWER SUPPLIES Advanced Energy s CoolX1000 series, part of our Excelsys product line, is the worlds only fanless 1000 W modular power supply. Packaged in a compact 259.5 mm x 164 mm x 40.6 mm (10 in x 6.5 in x 1U) AT A GLANCE U-channel design, the CoolX1000 provides up to 1000 W without any requirement for fan or base plate cooling, eliminating acoustic noise detrimental to scientific and medical applications, as well as applications sensitive to vibration or where fan cooling is not available. The CoolX1000 CX10S CX10M also offers increased flexibility by allowing system designers to monitor Power and control power supply performance essential for staving off process 1000 W 1000 W disruption using either analog or digital communications (PMBus). Slots PRODUCT HIGHLIGHTS Field-configurable plug and play 6 6 power No Fan Featured Series and parallel outputs higher Cooling 1000 W with 100% natural convection voltages/currents cooling Mounting options base/side and No fan featured No base plate needed DIN-Rail mounting No acoustic noise or vibrations Parameters TYPICAL APPLICATIONS Reliability 259.5 mm x 164 mm x 40.6 mm Medical MTBF > 2,900,000 hours (10 in x 6.5 in x 1U) Clinical diagnostic equipment, medical High-input surge protection 4 kV line lasers, dialysis equipment, radiological to PE for harsh environments Certifications imaging, chemical chemistry Reverse energy protection no blocking diodes required Industrial Medical 24 W standby power Test and measurement, industrial IE C60601-1 3rd edition, Saf ety approved to 5000 m altitude macines, automation equipment, IEC60601-1-2 4th edition (EMC) 93% efficiency printing, telecommunications, 2 MOPP Fiv e-year warranty audio equipment Dual fused SEMI F47* Flexibility Hi Rel Analog and digital management Har sh industrial electronics, radar (naval- PMBus monitoring and control capability and ground-based), communications, test Industrial and measurement IE C60950, IEC62368-1 ISO 9001:2015 Defense/Aero MIL-STD-810GCOOLX1000 SERIES MODULES CoolX CoolMods Single Output Modules Vnom (V) Set Point Adjust Range (V) Imax (A) Power (W) (1 Slot) CmA 5 2.5-6.0 21.0 105 1 2 CmB 12 6.0-15.0 15.0 180 CmC 24 15.0-28.0 8.3 200 3 CmD 48 28.0-58.0 4.17 200 High Power Modules (3 Slot) 4 CmE 24 24-25.2 25.0 600 4 CmF 48 48-50.4 12.50 600 Dual Output Modules (1 Slot) 5 CmG V1 24 3.0-30.0 3.0 90 V2 24 3.0-30.0 3.0 90 6 CmH V1 5 3.0-6.0 6.0 36 V2 24 3.0-30.0 3.0 90 Wide Trim Modules (1 Slot) CmA-W01 5 1.0-6.0 21 105 2 CmB-W01 12 1.0-15.0 15 180 CmC-W01 24 2.0-28.0 8.33 200 3 CmD-W01 48 3.0-58.0 4.17 200 * SEMI F47 compliant at input voltages > 180 VAC. Consult Advanced Energy for details. 1 Full dynamic specifications may not be met at full load when output voltage is trimmed by above 13 V 2 Max trim 14 V when used with high power module 3 Max trim 56 V when used with high power module 4 a) Only one high power module (CmE or CmF) can be used per CoolPac. b) During load transients starting from 0% load on the High Power modules, other modules in the CoolPac may experience an output voltage dynamic during the load change. Contact applications support for details or support. 5 For the CmG module, the max combined power of both outputs is 120 W 6 For the CmH module, the max combined power of both outputs is 100 W 2 advancedenergy.com