AIIS-DIO32 DIO module, 32-bit, 9-pin USB interface Startup Manual Packing List Specifications Before you begin installing your card, please make sure that General Features the following items have been shipped: 16 isolated DI and 16 isolated DO channels 1. 1 x AIIS-DIO module High voltage isolation on all channels (2,500 V) 2. 1 x Cable Supports 5 ~ 60 Vdc isolated input channels 3. 2 x Screws Interrupt handling capability Timer/counter capability 4. 2 x POST (Silver color) 5. 2 x POST (Golden color 18mm for AIIS-1240) 6. 2 x POST (Golden color 20mm for AIIS-1440) Support List 7. 1 x Startup manual AIIS-1240-00A1E 8. 1 x China RoHS AIIS-1440-00A1E 9. 1 x Warranty Note: For more support list, please visit our website. If any of these items are missing or damaged, please con- tact your distributor or sales representative immediately. Mechanical and Environmental Dimensions: 95.9 mm x 46.2 mm Operating temperature: 0 ~ 45 C Operating humidity: 10 ~ 95% 40 C, Non-Condens- ing Storage temperature: -40 ~ 70 C Storage humidity: 10 ~ 95% 60 C, Non-Condensing Weight: 0.3 kg Connector There is one connector on the module is used to connect with AIIS Series Motherboard. The below table lists the function of the connector. Connectors Label Function USB1 Connecting module and MB For more information on this and other Advantech products, please visit our website at: Installation Guide 1. Remove top cover. 2. Install the AIIS-DIO32 with 2 stand-off and 2 screws. 3. Connecting main board USB12 connector with AIIS-DIO32 USB1 connector via DIO cable. 4. Reinstall top cover. Figure 1: Installation Guide Dimension 46.15 8.89 5.08 0 0 11.56 Figure 2: AIIS-DIO32 Dimension 2 AIIS-DIO32 Startup Manual 95.89 90.81 87.63 8.26 5.08 0