Temperature / Low-power Vibration Sensor BB-HS-104T2505402 250 mV/g Accelerometer, 0-3.3V Output, Ultra Low-power, M12 Features Low voltage Ultra-low power consumption Temperature output M12 connector Voltage output proportional to acceleration (optional signal conditioning cable available) Use with Advantech Wzzard wireless sensing kits and nodes (sold separately) Sensor Magnetic Base (optional, sold separately) BB-HS-104T2505402 BB-MH112-1A Introduction Ordering Information This 250 mV/g accelerometer is specifically selected for use with Advantechs Wzzard Model No. Description Wireless Mesh Sensing Solutions (such as node model BB-WSD2M3101P2K). The transmitter vibration/temperature sensor is manufactured to high industrial specifications BB-HS-104T2505402 Ultra Low-Power Temperature/Vibration Sensor and rigorous ISO quality standards. Optional magnetic mounting base model BB-MH112-1A provides a secure, semi- Accessories Sold Separately permanent point of connection to flat or curved surfaces with an operating temperature BB-MH112-1A Magnetic mounting base up to +120 C (+248 F). (One base included with Wzzard Condition Based Monitoring Kit BB-WSK-CBM2.) BB-WSDCBL-ACL-2 M12 cable, AC to DC conversion, signal conditioning The sensor provides a voltage signal proportional to the acceleration measurement. Use (One cable included with Wzzard Condition Based Monitoring Kit BB-WSK-CBM2.) optional cable BB-WSDCBL-ACL-2 to rectify and average the sensor output. The cable BB-WSD2M3101P2K Wzzard Mesh industrial node, M12, 2s power out has an M12 connector and also provides signal conditioning. (One node included with Wzzard Condition Based Monitoring Kit BB-WSK-CBM2.) Model BB-WSD2M3101P2K is an industrial mesh node featuring an M12 connector and two second Power Out for sending vibration and temperature data to an IoT network. Battery power is provided on M12 connector pin for two seconds before taking each M12 Industrial Node reading. The node can be used to supply power to low-power sensors that require up to BB-WSD2M3101P2K (optional, sold separately) 2 seconds to become stable including sensor BB-HS-104T2505402. AC-DC M12 Cable BB-WSDCBL-ACL-2 (optional, sold separately) Typical Frequency Response (at 250 mV/g) Wzzard Condition Based Monitoring Starter Kit 50% 40% 30% Model BB-WSK-CBM-2 20% 10% 0% Included Hardware -10% -20% (1) Wzzard Mesh Wireless Sensor Node Model BB-WSD2M3101P2K (2 analog -30% inputs, M12 connector, external antenna) -40% -50% (1) BB-HS-104T2505402, ultra-low power temperature/vibration sensor 0 1 10 100 1,000 10,000 (1) BB-MH112-1A, magnetic mounting base Frequency Hz (1) BB-WSDCBL-ACL-2, M12 cable with signal conditioning (1) SmartSwarm 342 Ethernet Network Gateway with Wzzard board. (Note: one gateway supports up to 100 wireless sensor nodes.) Industries Applications Building Services Fans Rolls Included Software Pulp & Paper Motors Dryers Cloud license for WebAccess/DMP device management and configuration tool. Mining Pumps Presses Node-RED flow with Web server for: Metals Compressors Cooling Real time data display Utilities Centrifuges VAC Historian trending Automotive Conveyors Spindles Visual and email/SMS alerts Water Air Handlers Machine Tooling External data source integration (weather, Twitter feeds, and more) Pharmaceutical Gearboxes Process Equipment BB-USOPTL4-2P BB-USOPTL4-4P 0221ds All product specifications are subject to change without notice. BB-HS-104T2505402 1121ds Sensitivity Change %BB-HS-104T2505402 Specifications Technical Performance Electrical Mounted Base Resonance Electrical Noise < 500g 25 kHz (1,500 kcpm) (nominal) (resonant frequency) Power Requirements 3.3V nominal 250 mV/g 8% Current Consumption 100A nominal at 5V supply (60A at 1.8V) Sensitivity Nominal 80 Hz at +22 C Bias Voltage 50% of supply voltage Frequency Response 0.3Hz (18 cpm) to 10 kHz (600 kcpm) 10% Setting Time 1 second Isolation Base isolated Output Impedance 100 Ohms, maximum Range 8g 3.3 power 8 Case Isolation >10 Ohms at 500V Transverse Sensitivity < 5% Environmental Amplitude Linearity 1.0% Operating Temperature Range -50 to +125 C -10.9 mV/C standard C - Option 150C Sealing IP67 Temperature Output 3.3V supply, min. - Output 0 C 2.1V Maximum Shock 5000g 10 C 1.99V Regulatory Approvals / Standards / Directives Temperature Scaling - sensor and Model 0V = 365.54 F EMC: EN 61326-1:2013 BB-WSDCBL-ACL-2 cable (see ordering table) 3.3V = -176.688 F RoHS-3 (2011/65/EU amended by 2015/863/EU), CE, WEEE Vibration Scaling - sensor and Model 1.4V = 0g BB-WSDCBL-ACL-2 cable (see ordering table) 3.3V = 7.6g Mechanical Case Material Stainless steel Sensing Element/Construction PZT/Shear Mounting Torque 8Nm Weight 125 gm (nominal), body only HS-AC010 - straight Screed Cable Assembly HS-AC011 - right angle Mounting Threads 1/4-28 UNF male Cable / Connector M12 1 diameter Magnetic Mounting Base 1/4-28 UNF male thread (optional, sold separately) 40 lb. pull strength 0.7 height Connection Details Mechanical Drawing - Sensor Mechanical Drawing - Magnetic Mounting Base Connection Thread Pin 3 Pin 4 1/4-28 UNF Male Signal O/P 0 Volts (Blue) (Black) Pin 2 Pin 1 22mm Supply Temp (White) (Brown) 67mm 1.78 cm 43mm (0.7 in) 25mm A/F pole pieces 2.54 cm (1.0 in) Magnetic Mounting Base BB-BB-MH112-1A (optional, sold separately) Installation Detail Vibration sensor should be firmly fiixed to a flat surface (spot face surface may be needed to be produced and cable anchored to sensor body.)