AC Current Probe Model MN213 The Model MN213 is the latest in Features Applications compact AC current probes. It is designed to meet the most stringent Small, compact size Measuring in breaker panels demands in industry and electrical Measurement range of Industrial loads contracting. Model MN213 meets 0.5 to 240AAC HVAC EN 61010, 600V, Cat. III safety Large jaw opening accommodates standards and is CE Marked and Residential and commercial sites conductors up to 250MCM UL approved for Canada and United 5A secondary current transformers States. Designed for DMMs, loggers, (CTs) monitoring recorders and oscilloscopes The Model MN213 has a 0.78 (20mm) Data logging/recording jaw opening and can accommodate 40Hz to 10kHz response conductors up to 250MCM. The 1mAAC/AAC output signals unique hooked jaw design facilitates clamping and hooking onto Designed to EN 61010, 600V conductors. Polycarbonate materials Cat. III safety standard and ultrasonic welding are used UL approved for Canada and throughout to ensure ruggedness United States and overall lasting reliability. Double Insulation The Model MN213 uses tape-wound CE Mark cores to further improve its high and low end performance. Rated at 200Arms it has a measurement range to 240Arms. AC Current Probe Model MN213 (pdf) 10/05 Rev. 03 Technical Assistance (800) 343-1391 www.aemc.com 1 of 4Specifications MODEL MN213* ELECTRICAL Nominal Range 200A Measurement Range 0.5 to 240A Transformation Ratio 1000: 1 Output Signal 1mA/A on 1 Accuracy (200A Range) 0.5 to 10A 3.0% of Reading 0.5A 10 to 40A 2.5% of Reading 0.5A 40 to 100A 2.0% of Reading 0.5A 100 to 240A 1.0% of Reading 0.5A Phase Shift (200A Range) 0.5 to 10A Not Specified 10 to 40A 5.0 40 to 100A 3.0 100 to 240A 2.5 Overload 240A for 10 min ON, 30 min OFF Frequency Range 40 to 10kHz Limit Operating 200A permanently to 1kHz Derating above 3kHz: 200A x (1/0.333F), F in kHz Conditions Crest Factor 3 200Arms with an error (due to CF) of 4% Working/Common 600Vrms Mode Voltage Output Termination 5 ft Lead MECHANICAL Operating Temperature 14 to 131F (-10 to 55C) Storage Temperature -40 to 158F (-40 to 70C) Operating Relative 10 to 35C 85% RH (without roll-off above 35C) Humidity Jaw Opening 0.83 (21mm) Maximum Conductor 0.78 (20mm) Size Dimensions 5.47 x 2.00 x 1.18 (139 x 51 x 30mm) Weight 6.5 oz (180g) Polycarbonate Material Polycarbonate with fiberglass charge, UL94 V0 SAFETY Electrical EN 61010-2-32 UL Approval Yes Canada and United States Double Insulation Yes CE Mark Yes Note: Reference conditions: 20 to 26C, 20 to 75% RH, external magnetic field <40A/m, 48 to 65Hz sine wave, distortion factor less than 1%, no DC component, no external current carrying conductor, test sample centered. Load impedance >1 *Diode protection for open secondary (output) AC Current Probe Model MN213 (pdf) 10/05 Rev. 03 Technical Assistance (800) 343-1391 www.aemc.com 2 of 4