13158 AIM

OAJ WATER SOLUBLE CORED WIRE FEATURES Excellent Wetting Properties High Activity Level Reduces Oxidation of Solder Iron Tip Residue Washes Easily with DI Water Alone Excellent Thermal Transfer DESCRIPTION OAJ Flux Cored Solder Wire has been formulated with an innovative amine neutralized halide-activator system. This novel system offers a high activation level that provides rapid oxide HANDLING & STORAGE removal and maximum capillary action, resulting in faster wetting Time Conditions on all surface finishes and plating. OAJ flux residues MUST be 3 years Cool < 30C (< 86F) Dry < 75%Rh removed after soldering. IPC flux classification ORH1. Store cored wire in a clean, dry area away from moisture and sunlight. Avoid freezing. STANDARD AVAILABILITY OAJ Cored Wire is available in Sn/Pb, SAC305 and SN100C CLEANING alloys. Other alloys, diameters and spool sizes may be available Post-process residues can remain in place up to 8 hours*. Flux upon request. residue can be removed with normal tap water 38 - 60C (100 - 140F) with a DI water final rinse. Use of a APPLICATION pressurized spray cleaning system is suggested, but is not Solder iron tip temperature should be between 350 - 400C (650 - required. 750F) for Sn63, Sn62 and Sn60 alloys, 370 - 425C (700 - 800F) *Environment and application dependent for SN100C, Sn/Ag and Sn/Ag/Cu (SAC305, SAC405, CASTIN, etc.) alloys. SAFETY Use with adequate ventilation and proper personal protective equipment. Refer to the accompanying Safety Data Sheet for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers. Document Rev NF6 Page 1 of 2 TEST DATA SUMMARY Name Test Method Results IPC Flux Classification J-STD-004 ORH1 IPC Flux Classification J-STD-004B 3.3.1 ORH1 Name Test Method Results Image J-STD-004B 3.4.1.1 High - > 50% Copper Mirror IPC-TM-650 2.3.32 Removal J-STD-004B 3.4.1.2 Corrosion Major Corrosion Uncleaned IPC-TM-650 2.6.15 J-STD-004B 3.4.1.3 Quantitative Halides 2.0% Typical IPC-TM-650 2.3.28.1 Qualitative Halides, J-STD-004B 3.5.1.1 Halides Detected Silver Chromate IPC-TM-650 2.3.33 Qualitative Halides, J-STD-004B 3.5.1.2 None Detected Fluoride Spot IPC-TM-650 2.3.35.1 Surface Insulation J-STD-004 3.4.1.4 >100M Cleaned Resistance IPC-TM-650 2.6.3.3 Surface Insulation J-STD-004B 3.4.1.4 >100M Cleaned Resistance IPC-TM-650 2.6.3.7 Flux Solids, J-STD-004B 3.4.2.1 100% Nonvolatile IPC-TM-650 2.3.34 Typical Determination Acid Value J-STD-004B 3.4.2.2 104 2.68 Determination IPC-TM-650 2.3.13 Typical Visual J-STD-004B 3.4.2.5 White Solid J-STD-005A 3.9 Wetting PASS IPC-TM-650 2.4.45 J-STD-004B Fluoride PASS IPC-TM-650 J-STD-004B 3.7.2 Flux Spreading PASS IPC-TM-650 2.6.14.1 J-STD-005A 3.4 Metal/Flux Content 98% / 2% IPC-TM-650 2.2.20 J-STD-004B 3.7.2 Spread PASS IPC-TM650 2.4.46 Cleanliness TM125-03 PASS Document Rev NF6 Page 2 of 2