CA723/10 Altech

Screw Clamp Terminal Block Accessories INTERNAL JUMPER INSULATED INTERNAL JUMPER Jumpering System The jumpering systems bus poten- tials between terminal blocks, reduc- ing wiring time. Adjacent blocks or selective terminal blocks within an assembly can be easily interconnect- ed, leaving terminal clamps free for wiring. Purchase complete assem- blies, which are ready for installation, or select individual components to Terminal Series Poles Cat. No. Torque Std. Pk. Cat. No. Torque Std. Pk. create custom or extra long jumpers. CTS2.5UN 2 CA721/2 0.4 Nm 100 CA741/2 0.4 Nm 100 Jumper ampacity is lower than the 3 CA721/3 100 CA741/3 100 rated current of the respective termi- 4 CA721/4 100 CA741/4 100 nal blocks, therefore, applied current 10 CA721/10 10 CA741/10 10 must not exceed the maximum cur- 2 100 CA721/100 10 CA741/100 10 rent value of the block. Internal CTS4UN 2 CA722/2 0.4 Nm 100 CA742/2 0.4 Nm 100 jumpers may be used in combination CMC1-2 3 CA722/3 100 CA742/3 100 with external jumpers to achieve CMC2-2 4 CA722/4 100 CA742/4 100 additional jumpering possibilities. CTS4UTM 10 CA722/10 10 CA742/10 10 CKT4U CA722/100 10 CA742/100 10 Internal Jumper Assemblies 2 CDL4UN 100 Internal Jumper Assemblies consist of a 10 (breakable) CA723/2 0.5 Nm 100 CA743/2 0.5 Nm 100 Current Bar, Shorting Sleeves and CTS6U 2 1 CA723/3 50 CA743/3 50 screws. They install easily into the center CDTTU 3 1 CA723/4 50 CA743/4 50 of the terminal block and connect to the CDTTU-SH 4 1 CA723/10 10 CA743/10 10 CSDL6U 100 current bar. They are available as stan- 1 CSFL6U dard 2, 3, 4 or 10 pole assemblies and are ready for immediate installation. CA724/2 0.5 Nm 100 CA744/2 0.5 Nm 100 CTS10U 2 CA724/3 50 CA744/3 50 Insulated internal jumpers provide shock 3 CA724/4 50 CA744/4 50 protection when installed on terminal 4 CA724/10 10 CA744/10 10 block assemblies. 10 CA751/2 0.8 Nm 50 CA761/2 0.8 Nm 50 CTS16U 2 External Jumper CA751/3 50 CA761/3 50 3 External Jumpers bus potentials CA751/4 50 CA761/4 50 4 CA751/10 10 CA761/10 10 between terminal blocks, reducing 10 wiring time. Adjacent or selected CA725/2 0.8 Nm 50 CA745/2 0.8 Nm 50 CTS25U 2 blocks within an assembly can be CA725/3 20 CA745/3 20 3 easily interconnected. Jumper poles CA725/4 20 CA745/4 20 4 may be removed for selective CA725/10 10 CA745/10 10 10 jumpering. Jumpers are insulated CA726/2 0.8 Nm 50 CA746/2 0.8 Nm 50 CTS35U 2 and available in 2, 3, 4 and 10 pole CA726/3 20 CA746/3 20 3 versions. They are made of tin plated CA726/4 20 CA746/4 20 4 brass/copper. CA726/10 10 CA746/10 10 10 CA771/2 0.8 NM 50 CA781/2 0.8 NM 50 Current Bars CTS35UN* 2 CA771/3 20 CA781/3 20 Current Bars are offered to create 3 CA771/4 20 CA781/4 20 4 custom jumper assemblies for CA771/10 10 CA781/10 10 10 increased number of poles or custom jumpers. Select the current bar with CA727/2 0.4 Nm 100 CA747/2 0.4 Nm 100 CMT4 2 CA727/3 100 CA747/3 100 the required number of poles, or field CMT4S 3 CA727/4 100 CA747/4 100 cut them to the required length. They CMB4 4 CA727/10 10 CA747/10 10 are made of tin or nickel plated cop- CDL4U 10 2 CDL4U(I.S) 100 per or brass. ODL4U 10 (breakable) CDL4UTM Shorting Sleeves & Screws CA729/2 0.5 Nm 100 CA749/2 0.5 Nm 100 Shorting Sleeves & Screws ensure DDFL4U 2 CA729/3 50 CA749/3 50 reliable and mechanically safe elec- DDFL4U(E) 3 CA729/4 50 CA749/4 50 trical connections between current DDDL4U 4 1 CA729/10 10 CA749/10 10 CSFL4U 10 bars and the terminal block current 1 CSFL4U(L) bars. One shorting sleeve is required CSDL4U for each jumpered terminal. They are made of nickel plated brass. CAFL4U 2 1 CAFL4U(L) 3 4 10 CA722/2 0.4 Nm 100 CTL2.5U 2 CA722/3 50 CTL2.5UH 3 1 CA722/4 50 Internal Jumpering System not CTL2.5UL 4 CA722/10 20 available. CTL2.5UHL 10 2 2 CA722/100 20 100 pole strip can be broken down to CTL2.5U(I.S) 100 any number of poles desired. 10 (breakable) 96 Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Terminal Block Tools & Accessories category: Click to view products by Altech manufacturer: Other Similar products are found below : 00171430102 00171420102 600HL 600RJ-07 600RJ-11 600RJ-14 600RJS-10 600RJS-12 600RJS-21 601RJ-09 602SP 602Z 604J CSTSPC1-2 7B941-7 88943-2100 QC102 1437403-6 1437403-9 1437403-8 1453128-1 147832-1 EC0037-000 MT2/H-- MT6/H-N MT6/V-GRND MT8/H-51-60 BC2-12 BCC-1-8/10 EP2.5/4UN/BG 1707755 1735590 1755480 1789281 1840227 1840230 2-1437402-1 JA2-03 JB1-03/J JB2-04 JB2-05 JB2-07 JB2-09/J PARALLELJUMPERLINK JS601 2204082 2302463 2305949 8TK2-24 8WA1853