irpi01-868 Altitude Tech

IronLink LoRa Specications Modem LoRa: Microchip RN2483A Proccessor Cortex-M0 Dimensions Power Input Voltage: 2.4-5.5V Battery Input Voltage: 3.6-4.2V Power Consumption Idle: < 7uA Averge: 20mA Max: 200mA(Lora) 250mA(NB-IoT) Input Voltage Range 2.4V - 5.5V 77.043mA Max current draw - 200mA(Lora Tranmission) 250mA(NB-IoT Tranmission) Connectors Micro USB Com port & power Jtag Header Programming header GPIO Connector Communications header Battery Connector Terminal blocks GPS SMA connector LoRa/NB-IoT Antenna SMA connector Core Features GPS with Easy Mode* Or on-board GPS with 1second lock time (*When in easy mode) 28 pin header for add ons board Fuel Gauge for accurate battery tracking 6 channel 12bit adc for sensor addons Optional external GPS antenna for greater range Lora Antennta 868Mhz Integrated EEProm HAL software for easy programming USB serial interface for debugging Battery Support for 4.2V LiPo s www.ironlink.io www.ironlink.iowww.ironlink.ioIronLink LoRa Product Name IronLink LoRa 434 & 868MHz Product Description IronLink LoRa is an industrail Low-Power Long Range LoRa Technology Transceiver with GPS capabilities. A Rugged LoRaWAN Development Board for challenging applications. Integrated battery management, GPS and Fault Detection. IronLink is suitable for simple long range sensor applications with external host MCU. LoRa Specs Frequency Band 863.000 MHz to 870.000 MHz 433.050 MHz to 434.790 MHz Modulation Method FSK, GFSK, and LoRa Technology modulation Max Over the Air Data Rate 300 kbps with FSK modulation 10937 bps with LoRa Technology modulation Operation Range Up to 15 km coverage at suburban up to 5 km coverage at urban area Sensitivity at 1% PER -146 dBm Dependent on modulation settings, Receiver Bandwidth (RBW), and Spreading Factor (SF). RF TX Power Adjustable up to max. 10 dBm on 433 MHz band (limited to meet regulations) max. 14 dBm on the 868 MHz band. TX power is adjustable. For more information, refer to the RN2483 LoRa Technology Module CommandReference Users Guide (DS40001784). GPS Specs L1 Band Receiver (1575.42MHz) Channel: 22 (Tracking) / 66 (Acquisition) C/A Code: SBAS: WAAS, EGNOS MSAS, GAGA Horizontal Position Accuracy Acceleration Accuracy Autonomous: <2.5m CEP Without aid: 0.1m/s Velocity Accuracy Timing Accuracy Without aid: <0.1m/s 1PPS out: 10ns Reacquisition Time TTFF -130dBm with EASY: Sensitivity: Cold start: <15s Acquisition : -148dBm Warm start: <5s Tracking: -165dBm Hot start: <1s Reacquisition: -160dBm TTFF -130dBm without EASY: Dynamic Performance: Cold start: <35s Maximum Altitude: Max.18,000m Warm start: <30s Maximum Velocity: Max.515m/s Hot start: <1s Maximum Acceleration: 4G Max Update Rate: Up to 10Hz, 1Hz by default www.ironlink.io www.ironlink.io