A25L016 Series 16Mbit Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors Document Title 16Mbit, Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors Revision History Rev. No. History Issue Date Remark 1.0 Initial issue April 2, 2008 Final 1.1 Add the spec. of ICC3 for 100MHz December 26, 2008 Modify the ICC1 and ICC2 to 25A Modify the ICC7 to 25mA Modify the tPP to 3ms Modify the tSE to 0.2s 1.2 Modify the Sector Erase Time to 0.2s (typical) April 9, 2009 Modify the Page Program Time to 2ms (typical) Modify the Active Read Current to 35mA (Max.) Modify the Program/Erase Current to 25mA (Max.) Modify the Standby Current to 25A (Max.) Modify Block Erase Cycle Time to 1.3s (Max.) Modify Chip Erase Cycle Time to 40s (Max.) 1.3 Add packing description in Part Numbering Scheme April 23, 2010 1.4 October 27, 2010 P30: Change Data Retention and Endurance value from Max. to Min. 1.5 Add 8-pin WSON (6*5mm) package type December 21, 2010 1.6 Change tW, tSE, tBE and tCE values August 19, 2011 1.7 P1: Add Provide 64Bytes Security ID (application note is available September 20, 2011 by request) in Features 1.8 Add 8-pin SOP (150mil) package type October 11, 2011 1.9 Change tSE(typ.) from 0.15s to 0.08s November 15, 2011 Change tSE(max.) from 0.28s to 0.2s Change tBE(typ,) from 0.7s to 0.5s 2.0 P31: Change ICC6(max.) from 15mA to 25mA March 29, 2012 (March, 2012, Version 2.0) AMIC Technology Corp. A25L016 Series 16Mbit Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors FEATURES Family of Serial Flash Memories Electronic Signatures - A25L016: 16M-bit /2M-byte - JEDEC Standard Two-Byte Signature Flexible Sector Architecture with 4KB sectors A25L016: (3015h) - Sector Erase (4K-bytes) in 80ms (typical) - RES Instruction, One-Byte, Signature, for backward - Block Erase (64K-bytes) in 500ms (typical) compatibility Page Program (up to 256 Bytes) in 2ms (typical) A25L016 (14h) 2.7 to 3.6V Single Supply Voltage Package options Dual input / output instructions resulting in an equivalent - 8-pin SOP (150/209mil), 16-pin SOP (300mil), 8-pin DIP clock frequency of 200MHz: (300mil) or 8-pin WSON (6*5mm) - Dual Output Fast Read Instruction - All Pb-free (Lead-free) products are RoHS compliant - Dual Input and Output Fast Read Instruction Provide 64Bytes Security ID (application note is available by SPI Bus Compatible Serial Interface request) 100MHz Clock Rate (maximum) 16Mbit Flash memory - Uniform 4-Kbyte sectors - Uniform 64-Kbyte blocks GENERAL DESCRIPTION The A25L016 is 16M bit Serial Flash Memory, with advanced sectors. Each sector is composed of 16 pages. Each page is write protection mechanisms, accessed by a high speed 256 bytes wide. Thus, the whole memory can be viewed as SPI-compatible bus. consisting of 8,192 pages, or 2,097,152 bytes. The whole memory can be erased using the Chip Erase The memory can be programmed 1 to 256 bytes at a time, instruction, a block at a time, using Block Erase instruction, or a using the Page Program instruction. sector at a time, using the Sector Erase instruction. The memory is organized as 32 blocks, each containing 16 Pin Configurations SOP8 Connections SOP16 Connections A25L016 A25L016 HOLD 1 16 C V DIO 2 15 CC DU DU 3 14 V S 1 8 CC DU DU 4 13 DO 2 7 HOLD DU 5 12 DU C W 3 6 DU DU 6 11 V 4 5 DIO SS S V 7 10 SS DO W 8 9 Note: DU = Do not Use (March, 2012, Version 2.0) 1 AMIC Technology Corp.