A25L040AM-F Amic

A25L010A Series 1Mbit Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors Document Title 1Mbit Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors Revision History Rev. No. History Issue Date Remark 0.0 Initial issue September 13, 2012 Preliminary 0.1 Remove U grade October 11, 2012 1.0 Final version release October 15, 2012 Final 1.1 P.6: Add small sector protect function January 11, 2013 (January, 2013, Version 1.1) AMIC Technology Corp. A25L010A Series 1Mbit Low Voltage, Serial Flash Memory With 100MHz Uniform 4KB Sectors FEATURES Family of Serial Flash Memories Electronic Signatures - A25L010A: 1M-bit /128K-byte - JEDEC Standard Two-Byte Signature Flexible Sector Architecture with 4KB sectors A25L010A: (3011h) - Sector Erase (4K-bytes) in 200ms (typical) - RES Instruction, One-Byte, Signature, for backward - Block Erase (64K-bytes) in 0.5s (typical) compatibility - Block Erase (32K-bytes) in 0.4s (typical) A25L010A (10h) Page Program (up to 256 Bytes) in 1.5ms (typical) Package options 2.7 to 3.6V Single Supply Voltage - 8-pin SOP (150/209mil), 8-pin DIP (300mil), 8-pin TSSOP, SPI Bus Compatible Serial Interface 8-pin USON (2*3mm) and 8-pin WSON (6*5mm) 100MHz Clock Rate (maximum) - All Pb-free (Lead-free) products are RoHS compliant Advanced Protection Features - Software and Hardware Write-Protect - Top/Bottom, Block/Sector Array Protection GENERAL DESCRIPTION The A25L010A is 1M bit Serial Flash Memory, with advanced sectors. Each sector is composed of 16 pages. Each page is write protection mechanisms, accessed by a high speed 256 bytes wide. Thus, the whole memory can be viewed as SPI-compatible bus. consisting of 512 pages, or 131,072 bytes. The memory can be programmed 1 to 256 bytes at a time, The whole memory can be erased using the Chip Erase using the Page Program instruction. instruction, a block at a time, using Block Erase instruction, or a The memory is organized as 2 blocks, each containing 16 sector at a time, using the Sector Erase instruction. Pin Configurations SOP8 Connections DIP8 Connections A25L010A A25L010A V V CC S S CC 1 8 1 8 DO HOLD DO 2 7 HOLD 2 7 3 6 C 3 6 C W W V 4 5 V 4 5 DIO SS DIO SS (January, 2013, Version 1.1) 1 AMIC Technology Corp.