Amplified Middle Pressure Sensors Industrial Temperature Grade Features 0 to 0.3 psi to 0 to 100 psi Pressure Ranges Ratiometric 4V Output Temperature Compensated (-25C to 85C) Calibrated Zero and Span Applications Medical Instrumentation Environmental Controls HVAC General Description The Amplified line of middle pressure sensors is based upon a proprietary package technology to reduce errors. This model provides a ratiometric 4-volt output with superior output characteristics. The sensor housing has been designed specifically to reduce package induced parasitic stress and strain. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure. These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. Each sensor is internally compensated using an ASIC compensation technique. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The output of the device is ratiometric to the supply voltage over a supply voltage range of 4.5 to 5.5 volts. Physical Dimensions 2.54 C 1.27 L 8.74 0.100 0.050 0.344 (Typ) 0.020 x 0.010 Pin 0.30 minimum length Port 0.179 /0.189 Pin 1 Identifier Port A Port B 3.56 0.140 3.18 R0.125 pin 1: Vs pin 2: Gnd 20.32 12.19 13.97 0.800 0.480 0.550 pin 3: Vout 21.59 0.850 pin 4: do not connect Approvals MKT DATEMFG DATEENG DATEQA DATE As Is With Change As Is With Change As Is With Change As Is With Change All Sensors DS-0029 Rev C 3.18 0.125 10.67 0.420 5.33 0.210 10.67 0.420 27.43 1.080 a 16035 Vineyard Blvd. Morgan Hill, CA 95037 p 408 225 4314 f 408 225 2079 e www.allsensors.com all sensorsPressure Sensor Ratings Environmental Specifications +4.5 to +5.5 Vdc Supply Supply Voltage VS Temperature Ranges -10 to +10 psig Common-mode pressure Compensated -25 to 85 C 250C Lead Temperature, max Operating -40 to 125 C (soldering 2-4 sec.) Storage -40 to 125 C Humidity Limits 0 to 95% RH (non condensing) Standard Pressure Ranges Part Number Operating Pressure Nominal Span Proof Pressure Burst Pressure 0.3 PSI-D-4V-PRIME 0.3 PSI 4 V 5 PSI 10 PSI 0.3 PSI-G-4V-PRIME 0 - 0.3 PSI 4 V 5 PSI 10 PSI 1 PSI-D-4V-PRIME 1 PSI 4 V 5 PSI 10 PSI 1 PSI-G-4V-PRIME 0 - 1 PSI 4 V 5 PSI 10 PSI 5 PSI-D-4V-PRIME 5 PSI 4 V 15 PSI 30 PSI 5 PSI-G-4V-PRIME 0 - 5 PSI 4 V 15 PSI 30 PSI 15 PSI-A-4V-PRIME 0 - 15 PSIA 4 V 45 PSI 60 PSI 15 PSI-D-4V-PRIME 15 PSI 4 V 45 PSI 60 PSI 15 PSI-G-4V-PRIME 0 - 15 PSI 4 V 45 PSI 60 PSI 30 PSI-A-4V-PRIME 0 - 30 PSIA 4V 90 PSI 150 PSI 30 PSI-D-4V-PRIME 30 PSI 4 V 90 PSI 150 PSI 30 PSI-G-4V-PRIME 0 - 30 PSI 4 V 90 PSI 150 PSI 100 PSI-A-4V-PRIME 0 - 100 PSIA 4V 150 PSI 150 PSI 100 PSI-D-4V-PRIME 100 PSI 4V 150 PSI 150 PSI 100 PSI-G-4V-PRIME 0 - 100 PSI 4V 150 PSI 150 PSI Performance Characteristics for 0.3 PSI-D-4V-PRIME Parameter, note 1 Minimum Nominal Maximum Units Operating Range, differential pressure -- 0.3 -- PSI Output Span, note 4 1.90 2.0 2.10 V Oset ff Voltage zero differential pressure 2.15 2.25 2.35 V Oset ff Temperature Shift (-25C to 85C), note 2 -- -- 40 mV Linearity, hysteresis error, note 3 -- -- 0.5 %FSS Span Shift (-25C to 85C), note 2 -- -- 2 %FSS Amplified Middle Pressure Sensors Industrial Grade