NUMBER TYPE BUS-12-009 PRODUCT SPECIFICATION TITLE PAGE REVISION Bergcon Printed Wiring Board Connector Cold Plated 1 of 18 N AUTHORIZED BY DATE A.LUGO 4/09/08 CLASSIFICATION UNRESTRICTED 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the Gold Plated Contact Bergcon PV Vertical and Horizontal Connector product. This product can be Lead Free and meets the requirements of the European Union Directive of Restrictions for Hazardous Substances (Directive 2002/95/EC). 2.0 Scope This specification is applicable to the termination characteristics of the PV Connector family of products which provides interconnection of printed wiring boards in low power applications. The connectors only provide the female half of the interconnection and are designed for mating with single or double rows of .025 inch square pins, free standing or in headers on .100 or .150 inch centers. 3.0 General This document is composed of the following sections: Paragraph Title 1.0 OBJECTIVE 2.0 SCOPE 3.0 GENERAL 4.0 APPLICABLE DOCUMENTS 5.0 REQUIREMENTS 5.1 Qualification 5.2 Material 5.3 Finish 5.4 Design and Construction 6.0 ELECTRICAL CHARACTERISTICS 7.0 MECHANICAL CHARACTERISTICS 8.0 ENVIRONMENTAL CONDITIONS 9.0 QUALITY ASSURANCE PROVISIONS 9.1 Equipment Calibration 9.2 Inspection Conditions 9.3 Sample Quantity and Description 9.4 Acceptance 9.5 Qualification Testing 9.6 Re-Qualification Testing 10.0 REFERENCE DOCUMENTS 11.0 NOTES & DEFINITIONS TABLE 1 QUALIFICATION TESTING MATRIX Copyright FCI Form E-3334 GS-01-001 Rev F PDM: Rev:N Released .STATUS: Printed: Nov 28, 2010NUMBER TYPE BUS-12-009 PRODUCT SPECIFICATION TITLE PAGE REVISION Bergcon Printed Wiring Board Connector Cold Plated 2 of 18 N AUTHORIZED BY DATE A.LUGO 4/09/08 CLASSIFICATION UNRESTRICTED 4.0 Applicable Documents 4.1 Specifications- N/A 4.2 Military Standards MIL-STD-202 Test methods for electronic and electrical component parts. MIL-STD-275 Printed Wiring for Electronic Equipment MIL-M-14- Molding Plastic and Molded Plastic Parts, Thermosettings MIL-F-14256 Flux, Soldering , Liquid (Rosin Base), Activated MIL-M-20693 Plastic Molding Material, Polyamide (Nylon) MIL-M-24519 Molding Plastics, Polyester , Thermoplastic MIL-G-45204 Gold Plating, Electro deposited MIL-C-45662 Calibration System Requirements MIL-F-55110 Printed Wiring Boards 4.3 Federal Specifications QQ-N-290 Nickel Plating (Electro deposited) QQ-S-571 Solder: Lead Alloy, and Tin Lead Alloy and Tin Alloy Flux Cored Ribbon and Wire and Solid Form. QQ-B-613 Brass, Leaded and Non Leaded 4.4 Other Standards and Specifications 4.4.1 UL94- Test for Flammability of Plastic Materials. 4.4.2 EIA 364 Electrical Connector/Socket Test Procedures Including Environmental Classifications. 4.4.3 ASTM B 122 Copper - Nickel Tin Alloy, Copper-Nickel Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar. ASTM B-194 Copper-Beryllium Alloy Plate, Sheet, Strip and Rolled Bar 4.4.4 ANSI-J-002 Test condition A 4.5 FCI Specifications 4.5.1 BUS-02-055 Plastic Resin Selection BUS-02-056 Metal Selection BUS-02-057 Plating Selection Guidelines BUS-03-302 Sulfide Vapor Test BUS-03-405 Insertion / Withdrawal Force Measurement BUS-03-601 Current Rating / 30 Deg. C Temperature Rise BUS-19-122 Solder Joint Reliability Test procedure for Surface Mount Connectors Copyright FCI Form E-3334 GS-01-001 Rev F PDM: Rev:N Released .STATUS: Printed: Nov 28, 2010