NOTES: THIRD ANGLE PROJ. REVISIONS 4. PACKAGING: REV DESCRIPTION DATE ECO APPR 1. MATERIALS AND FINISHES: A. QUANTITY: SINGLE PACK -- RELEASE TO MFG. -- -- -- BODIES,OUTER CONTACT, CLAMP NUT, BRAID CLAMP, B. MARKING: BAG TO BE MARKED WASHER & COUPLING NUT - BRASS, NICKEL PLATING V REDRAWN IN PRO-E & COD SHEET ADDED 23-May-17 03863 MB AMPHENOL RF, 82-835, AND DATE COD BULLET CONTACT - BRASS,SILVER PLATING CONTACT - BeCu, SILVER PLATING 5. CABLE ASSEMBLY INSTRUCTIONS: WASHER -COPPER, NICKEL PLATING A. STRIP CABLE AS SHOWN. INSULATORS - PTFE, NATURAL B. SLIDE CLAMP NUT,WASHERS,GASKET & BRAID CLAMP OVER CABLE SHEATH. GASKETS - SILICONE RUBBER, RED C. COMB OUT THE BRAID AND FOLD OUT,TRIM EXCESS BRAID. RETAINING RING - PHOSPHOR BRONZE, NATURAL D. SOLDER CABLE CENTER CONDUCTOR TO CENTER CONTACT. E. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH 2. ELECTRICAL: PROPER SPANNER. MAKE ENSURE INTERFACE DIMENSIONS TO MEET. A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC - 11 GHz 6. SHOWS CABLE ENTRY DIMENSIONS. SCALE 0.750 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 C TO +165 C BRAID CLAMP GASKET WASHER CLAMP NUT 6 BULLET 0.097 CONTACT 6 0.443 0.578 REF 1.469 0.364 0.437 REF 6 6 0.440 11/16-24UNEF-1A 5/8 THREAD ACROSS FLATS 6 5/8 0.281 ACROSS FLATS 0.156 0.813 REF CENTER CONDUCTOR STAMPAMPHENOL 82-835 RECOMMENDED CABLE STRIPPING DIMENSIONS INTERFACE PER WIRE HOLES N PLUG TYP(3) CUSTOMER OUTLINE DRAWING 1.921 REF ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: MATERIAL DATE DRAWN TITLE 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES 04-Mar-14 MOHAN Amphenol RF TYPE N RIGHT ANGLE PLUG SEE NOTES NOTICE - These drawings, specifications, or other data (1) are, and remain the ENGINEER DATE property of Amphenol corp. (2) must be returned upon request and (3) are FOR RG-8/U,9/U,213/U, www.amphenolrf.com K.CAPOZZI 04-Mar-14 confidential and not to be disclosed to any person other than those to whom they 214/U & 225/U CABLE are given by Amphenol Corp. the furnishing of these drawings, specifications, or REFERENCE APPROVED DATE other data by Amphenol Corp., or to any other person to anyone for any purpose is DRAWING NO.82-835 EAR not to be regarded by implication or otherwise in any manner licensing, granting K.CAPOZZI 23-May-17 SCALE: 3.5:1.0 SHEET 2 OF 2 rights to permitting such holder or any other person to manufacture, use or sell any ITEM NO.82-835 CONFIGURATION LEVEL: In Work product, process or design, patented or otherwise, that may in any way be related to DWG SIZE CAD FILE REV or disclosed by said drawings, specifications, or other data. PART NO.82-835 FINISH B VX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for RF Connectors / Coaxial Connectors category: Click to view products by Amphenol manufacturer: Other Similar products are found below : 8915-1511-000 89674-0827 6001-7071-019 6002-7051-003 6002-7551-202 6059674-1 619550-1 630059-000 M39030/3-01N M3933/25- 36N 6500-7071-046 6769 CX050L2AQ 7002-1542-011 7004-1512-000 7009-1511-004 7010-1511-000 7029-1511-060 7101-1541-010 7101-1571-002 7105-1521-002 7145-1521-002 7203-1571-003 7209-1511-011 7210-1511-015 7210-1511-019 73137-5015 73216-2241 7325-1512-000 73404-2300 7405-1521-005 7405-1521-802 7406-1521-005 8527 8547 FS11V 8808-1511-001 9049-9513-000 9074-9513- 000 9101-9573-002 910A205F 9130-9573-002 PL11SC-026 PL375-33 PL40-5 PL71-9 PL74C-221 PL75MC-217 PL803-7 980-8666-005