ELVR-L01G-F1RT-I-NA5F Amphenol

ELVR - Analog and Digital Low Pressure Sensors Series Introduction Table of Contents The ELVR Series Mini Analog and Digital Output Sensor is 2 TM based on All Sensors CoBeam Technology. This reduces Features & Applications ..........................2 package stress susceptibility, resulting in improved overall long term stability. The superior dual-die technology also Standard Pressure Ranges ....................2 vastly improves position sensitivity compared to single die Pressure Sensor Maximum Ratings .........2 devices. This technology breakthrough advances the state of the art for piezoresistive pressure sensors beyond what has Environmental Specifications ......................2 been achieved for low pressure sensing using silicon based Analog Output (5V) Specifications...............3 strain technology. Analog Output (3V) Specifications................4 The ELVR sensors can communicate directly with microcon- Digital Output (5V) Specifications .........5 trollers, eliminating the need for additional A/D converters. ELVR series pressure sensors are available at 3V and 5V Digital Output (3V) Specifications................6 supply voltage. The ELVR series provides a rapid update rate Device Option Descriptions .........................7 at multiple resolutions. A wide range of miniature SIP and 2 DIP package options allows for flexible and space-saving I C Interface .........................................8-9 PCB-mounting. These calibrated and compensated sensors SPI Interface ......................................10-11 provide accurate, stable output over a wide temperature range. This series is intended for use with non-corrosive, How to Order Guide................................12 non-ionic working fluids such as air and dry gases. A pro- Dimensional Package Drawings tective parylene coating is optionally available for moisture/ Non-Barbed SIL, DIP and SMT ....13-16 harsh media protection for pressure ranges 10 inH2O and above. Barbed SIL, DIP and SMT ...........17-20 The ELVR Series is a direct replacement to First Sensors Product Labeling................................21 HCLA product line. Refer to the product web page for a Suggested Pad Layouts .......................21 cross reference table: ELVR Series Analog & Digital Pressure Sensors Features Applications Pressure Ranges from 2.5 mbar to 75 mbar Medical (1 to 30 inH2O) Industrial Precision ASIC Conditioning Analog Output with Digital I2C and SPI Interface 3V and 5V Supply Voltage Standard Pressure Ranges Differential Differential A Device Operating Range Proof Pressure Burst Pressure mbar inH2O mbar inH2O mbar inH2O 2.5 ELVR-L01D 1 250 100 750 301 12.5 ELVR-L05D 5 500 201 750 301 25 ELVR-L10D 10 500 201 750 301 50 ELVR-L20D 20 500 201 1250 502 75 ELVR-L30D 30 500 201 2000 803 2.5 ELVR-L01G 1 250 100 750 301 12.5 ELVR-L05G 5 500 201 750 301 25 ELVR-L10G 10 500 201 750 301 50 ELVR-L20G 20 500 201 1250 502 75 ELVR-L30G 30 500 201 2000 803 Note A: Operating range in inH2O is expressed as an approximate value. ELVR series is calibrated to mbar pressure units. Pressure Sensor Maximum Ratings Environmental Specifications Supply Voltage (Vs) 2.7 to 5.5 Vdc Temperature Ranges Compensated: Commercial 0C to 70C Analog-Output Current Industrial -20C to 85C Sink 1 mA Source 1 mA Operating -25C to 85C Storage -40C to 125C Common Mode Pressure 2000 mbar / 803 inH2O Humidity Limits (non condensing) 0 to 95% RH SMT Assembly Specifications Equivalent Circuit I2C SPI Average preheating temperature gradient 2.5 K/s Soak Time ca. 3 min +Vs +Vs Time above 217C 50 s MISO Time above 230C 40 s Vout CLK SCL Time above 250C 15 s Vout SS SDA MOSI Peak Temperature 260C Cooling Temperature Gradient -3.5 K/s GND GND See package drawings for pinouts. All Sensors DS-0375 Rev A Page 2 Table of Contents a 16035 Vineyard Blvd. Morgan Hill, CA 95037 p 408 225 4314 f 408 225 2079 e www.allsensors.com all sensors