4-20 mA configurable vibration transmitter module iT300 The iT300 transmitter provides an easy means to connect a standard IEPE vibration sensor to a PLC, DCS or SCADA system. The transmitters input provides power to and measures the signal from either an accelerometer, piezovelocity sensor or dual output sensor. The input circuitry has a wide frequency response, capable of measuring signals between 0.2 Hz and 20,000 Hz. The transmitter has two Band 1 Band 2 independent processing bands (adjustable) (adjustable) with flexible mapping options to two separate 4-20 mA analog outputs. The processing channels contain selectable Key features integration, allowing input from accelerometers to be output Accepts input from as acceleration or velocity. accelerometers (single or Selectable band filters and dual output) or piezovelocity detector types make it easy to sensors tailor the processing to specific machines or applications. Input signal is split into two independent processing bands System architecture input/output Measures real-time sensor bands, BOV, true peak and temperature (if applicable) Built-in web server for custom configuration of bandwidth/detection type 2 x 4-20 mA outputs, user- Power input defined 4-20 mA outputs Input/output processor Text field for user entry of machine information Configurations can be stored Selectable speed range Manufactured in an approved ISO 9001 facility Certifications Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Tel: +1 (301) 330-8811 buy.wilcoxon.com Frederick, MD 21701 Fax: +1 (301) 330-8873 An Amphenol Company www.wilcoxon.com USA info wilcoxon.com 99256 Rev.D.1 10/18 14-20 mA configurable vibration transmitter module iT300 SPECIFICATIONS INPUT MAPPABLE OUTPUTS IEPE sensor type Single-ended, DC coupled 2 user-configurable, based on (5) 4-20 mA output Temperature sensor input 10 mV/C mappable options IEPE power source +24 VDC, 4.5 mA Max loop resistance 500 1 Output scaling : Sensitivity range: 2 acceleration g (m/sec ) - rms, peak, peak-peak acceleration 9 - 11,000 mV/g velocity ips (mm/sec) - rms, peak, peak-peak velocity 9 - 11,000 mV/ips displacement mils (mm) - rms, peak, peak-peak Full scale input range 10 VDC 1 Output ranges : Frequency response 0.2 - 20 kHz (-3 dB, -0.1 dB) 2 acceleration 1 - 50 g (10 - 500 m/sec ) Fmax options 200, 500 Hz 1, 2, 5, 10, 20 kHz velocity 0.1-5 ips (2-100 mm/sec) Accuracy 0.2% of full scale, 100 Hz displacement 10 - 200 mils (0.2 - 5.0 mm) ADC sampling rate 48 kbps, 24 bits delta-sigma ENVIRONMENTAL FFT resolution, windowing 1,600 lines, Hanning window 40 to +70C Temperature range (storage: 40C to +85C) Dynamic range >90 dB 11 - 32 VDC, 3.8 watts max CONFIGURABLE OPTIONS Power (158 mA at 24 VDC) 1 2 Sensor unit or single integration Isolation 500 VAC 3 Fstart Frequency bands 1 and 2 3 Connection type screw terminal, 14 - 24 AWG Fstop Detection type: rms, peak, pk-pk Mounting 35 mm DIN rail 4 Fixed measurement bands True peak, BOV, temperature Dimensions W x H x D: 22.5 x 99.2 x 114.5 mm 1 Notes: Based on IEPE sensor type (accelerometer or piezovelocity). 2 Acceleration signal to velocity, velocity signal to displacement. 3 The available selections are affected by the Fmax setting. 4 PLUS +24 VOLT POWER POWER SUPPLY GROUND 786T style sensors only. POWER CONNECTION, REAR 17 & 18 System architecture TOP TERMINAL BLOCK MIDDLE 2 X 4-20 mA OUTPUT LOOPS CONNECTORS FRONT BLANK Terminal numbers and IO Port signal assignments 1 No connection REAR PANEL 2 Temperature sensor (in T+) MOUNTED T-BUS Vibration sensor 3 Signal in / Sensor Power (IN+) CONNECTOR 4 Circuit Common (COM) (OPTIONAL) Temperature 5 Circuit Common (COM) RJ-45 CONNECTOR P+ dynamic output 6 Temperature out (T) FOR INTERFACING WITH PC P- NO CONNECTION EQUIPPED WITH SUPPORTED WEB Sensor dynamic 7 Circuit Common (COM) D(A) BROWSER TO CONFIGURE MODULE output 8 Sensor out (SENS) D(B) 13 B- 4-20 mA Loop B 14 B+ 15 A- 4-20 mA Loop A 16 A+ 17 P- Power input 18 P+ 19 BOTTOM FRONT DYNAMIC OUTPUT Not used TERMINAL BLOCK 20 REAR SENSOR CONNECTION CONNECTORS Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies 8435 Progress Drive Tel: +1 (301) 330-8811 buy.wilcoxon.com Frederick, MD 21701 Fax: +1 (301) 330-8873 An Amphenol Company www.wilcoxon.com USA info wilcoxon.com 99256 Rev.D.1 10/18 2