TITLE: DWG NO: REV: SH: OF: ECO-MATE,RECEPTACLE,JAM UNT,SIZE 20,28POS,SOCKET. RT072028S*H B1 1 1 +0.2 35.2 0 REVISIONS REV ECO DESCRIPTION DATE BY APPR B1 - RELEASED DRAWING SEP-24-2014 BEN TOMMY 38.6 Ref MASTER KEYWAY 1 3/16-18 UNEF THREAD 1 3/8-18 UNEF THREAD 46.1 NOTES(UNLESS OTHERWISE SPECIFIED) 1. MATERIAL SHELLZINC ALLOYNICKEL PLATED. INSERTTHERMOPLASTICUL94 V-0. KEY POS PART NUMBER NUTSAL ALLOY , NICKEL PLATED. SEAL GASKETNBR. N RT072028SNH O-RINGNBR. W RT072028SWH 2. SPECIFICATIONS 2.1 RATED CURRENT13A (MAX). X RT072028SXH 2.2 RATED VOLTAGE300V(AC/DC). Y RT072028SYH 2.3 OPERATING TEMPERATURE-40C +105C. 2.4 DIELECTRIC WITHSTANDING VOLTAGELESS THAN Z RT072028SZH 2 MILLIAMPS CURRENT LEAKAGE 2000 VOLTS AC. 2.5 INSULATION RESISTANCE5000 MEGOHMS MIN. 2.6 IP--CLASSIP67. PANEL CUT OUT 2.7 MATING CYCLES DURABILITY500 CYCLES MIN. SEE PART NUMBER REFERENCE 2.8 ROHS COMPLIANT. CHART QUANTITY PART NUMBER DESCRIPTION ITEM 3. SUITABLE CONTACTS16 CONTACTS. MATERIALS LIST 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. UNLESS OTHERWISE SPECIFIED SIGNATURES DATE 1) All dimensions are in metric(mm). DRAWN: Amphenol 2) Tolerances are as follows: BEN SEP-24-2014 1 PL DEC 0.30 Fractions 1/64 CHECKED: 2 PL DEC 0.15 Angles 1 Sine Systems - www.amphenol-sine.com 3 PL DEC 0.08 44724 Morley Drive ENGINEER: 3) Note reference = X Clinton Township, MI 48036 APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: ECO-MATE,RECEPTACLE, JAM NUT, SIZE 20,28POS,SOCKET. THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, PROCESS SPECIFICATIONS: SPECIFICATIONS AND PERFORMANCE DATA SIZE TYPE DWG NO: REVISION SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL B C- RT072028S*H B1 DIMENSIONS ARE SUBJECT TO NORMAL NEXT ASS Y: SCALE: MANUFACTURING VARIATIONS. SHEET OF NONE 11 31.7 +0.2 33.0 0 46.1ecomate RM/RSSM/Aquarius - Contact Size 16 Options Crimp Contacts, Machined Crimp Contacts, Stamped & Formed Part Number Part Number Wire Range AWG Wire Range (mm) Plating AWG Plating (mm) Male Female Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash SP14M2F SS14M2F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5 SP14M2G5 SS14M2G5 14 2.0-2.5 Gold 5 MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10 SP14M2G10 SS14M2G10 14 2.0-2.5 Gold 10 MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15 SP14M2G15 SS14M2G15 14 2.0-2.5 Gold 15 MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30 SP14M2G30 SS14M2G30 14 2.0-2.5 Gold 30 MP16M23F MS16M23F 18-16 0.75-1.5 Gold Flash SP16M2F SS16M2F 18-16 0.75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 0.75-1.5 Gold 5 SP16M2G5 SS16M2G5 18-16 0.75-1.5 Gold 5 MP16M23G10 MS16M23G10 18-16 0.75-1.5 Gold 10 SP16M2G10 SS16M2G10 18-16 0.75-1.5 Gold 10 MP16M23G15 MS16M23G15 18-16 0.75-1.5 Gold 15 SP16M2G15 SS16M2G15 18-16 0.75-1.5 Gold 15 MP16M23G30 MS16M23G30 18-16 0.75-1.5 Gold 30 SP16M2G30 SS16M2G30 18-16 0.75-1.5 Gold 30 MP20M23F MS20M23F 22-20 0.34-0.50 Gold Flash SP20M2F SS20M2F 22-20 0.34-0.50 Gold Flash MP20M23G5 MS20M23G5 22-20 0.34-0.50 Gold 5 SP20M2G5 SS20M2G5 22-20 0.34-0.50 Gold 5 MP20M23G10 MS20M23G10 22-20 0.34-0.50 Gold 10 SP20M2G10 SS20M2G10 22-20 0.34-0.50 Gold 10 MP20M23G15 MS20M23G15 22-20 0.34-0.50 Gold 15 SP20M2G15 SS20M2G15 22-20 0.34-0.50 Gold 15 MP20M23G30 MS20M23G30 22-20 0.34-0.50 Gold 30 SP20M2G30 SS20M2G30 22-20 0.34-0.50 Gold 30 MP24M23F MS24M23F 26-24 0.14-0.25 Gold Flash SP24M2F SS24M2F 26-24 0.14-0.25 Gold Flash MP24M23G5 MS24M23G5 26-24 0.14-0.25 Gold 5 SP24M2G5 SS24M2G5 26-24 0.14-0.25 Gold 5 MP24M23G10 MS24M23G10 26-24 0.14-0.25 Gold 10 SP24M2G10 SS24M2G10 26-24 0.14-0.25 Gold 10 MP24M23G15 MS24M23G15 26-24 0.14-0.25 Gold 15 SP24M2G15 SS24M2G15 26-24 0.14-0.25 Gold 15 MP24M23G30 MS24M23G30 26-24 0.14-.025 Gold 30 SP24M2G30 SS24M2G30 26-24 0.14-0.25 Gold 30 Tooling, Machined Tooling, Stamped & Formed Part Number Description Part Number Description QXRT16 Contact Extraction Tool, 16 ( 1.6) Contact QXRT16 Contact Extraction Tool, 16 ( 1.6) Contact MFX-3959 Hand Crimp Tool for Machined Contacts MFX-3954 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3960 Pneumatic Crimp Tool for Machined Contact MFX-3957 Crimp Die, Stamped & Formed Contact Plating Options, All Misc Tooling, All Symbol Plating Part Number Description T Tin Plated (for Stamped & Formed Contacts) CA-4020-59 Sealing Plug, Size 16 & 20 S Silver Plated 5Um (for Machined Contacts) F Gold Plated G5 Gold Plated (Thickness 5) Standard Quantity Order Options G10 Gold Plated (Thickness 10) Machined Stamped & Formed G15 Gold Plated (Thickness 15) Bulk Package, 500 Pieces Reel, 3000 Pieces G30 Gold Plated (Thickness 30) Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021