Telaire T6615 Sensor Dual Channel Module Compact CO Module Designed 2 to Integrate Into Existing Controls and Equipment The Telaire T6615 dual-channel CO Module is 2 designed to meet the volume, cost, and delivery expectations of Original Equipment Manufacturers (OEMs). Features An affordable gas sensing solution for OEMs. A reliable sensor design based on 15 years of engineering and manufacturing expertise. Flexible CO sensor platform designed to interact 2 with other microprocessor devices. Dual-channel optical system and three-point calibration process for enhanced stability, accuracy and reliability. Designed for applications where ABC Logic cannot be used Sensor may be field calibrated Amphenol Advanced SensorsTelaire T6615 Sensor 0.062 in 1.75 in (0.1575 mm) (44.45 mm) 0.38 in Module Specifications 2 Mounting Holes .105 (2.667) (9.65 mm) Method Dual-channel Non Dispersive Infrared (NDIR), gold plated optics, diffusion or flow through sampling. Measurement Range 0.15 in (3.81 mm) 0 to 2000 ppm 0.54 in 0 to 5000 ppm (13.7 mm) 1.125 in (28.575 mm) 0 to 10,000 ppm 2.25 in 0.60 in (57.15 mm) (15.24 mm) 0 to 50,000 ppm Dimensions 2.25 in X 1.365 in X 0.60 in Output (57.15 mm X 34.67 mm X 15.24 mm) Digital Accuracy* UART 19200 Baud (Please call for detailed product 75 ppm or 10% of reading (whichever is greater) specifications). Temperature Dependence Analog 0.2% FS per C 0 to 4 VDC Stability over Life of Sensor (10 Years) Power Supply Requirements < 5% of FS or <10% reading annual 5 VDC regulated (5%) Pressure Dependence Power Consumption 0.135% of reading per mm Hg 0.90 watts peak 0.165 watts average Response Time < 2 minutes for 90% step change typical Interface Connections Designed for 12 pin male header with 0.1 in (2.54 mm) Warm Up Time spacing. Header not included. < 2 minutes (operational) 10 minutes (maximum accuracy) Flow Rates (Via Flow Ports) Flow through version: 50 cc/min maximum Operating Conditions Diffusion version: 80 - 120 cc/min 32F to 122F (0C to 50C) 0 to 95% RH, non condensing Warranty Terms 12 months Storage Conditions -40F to 158F (-40C to 60C) * Handling and OEM assembly may affect factory calibration. (Non Condensating) 1.365 in (34.67 mm) 1.24 in (31.5 mm)