T8041 Amphenol

Ventostat T8041/T8042 Telaire CO Duct Probe Transmitters 2 Telaire is excited to announce to announce a new generation of Telaire CO transmitters targeting 2 indoor air quality and energy conservation applications. The Ventostat T8041/T8042 duct mount CO transmitters offer accuracy and 2 versatility at an affordable price. This exceptional product line touts an unobtrusive form factor that is easy to install, simple to use, and remains accurate over the expected life of the device using Telaires patented ABC Logic (Automatic Background Calibration) technology. Features Gas permeable, water resistant diffusion filter prevents particulate and water contamination of Simple installation (mounting hardware and the sensor instructions included) RoHS compliant Two models with different probe lengths to suit a variety of return air duct sizes Lifetime calibration guarantee (ABC Logic on) Offers standard 0-10 volt or 0-5 volt output Applications Patented absorption infrared/gas sensing engine CO transmitters can be used in a broad range provides high accuracy in a compact low-cost 2 of applications including air quality monitoring package in buildings. CO concentration levels in 2 buildings are monitored to provide an indication Patented ABC Logic self-calibration system of occupancy and to drive a ventilation control eliminates the need for manual calibration in most strategy. An effective DCV (Demand Controlled applications Ventilation) strategy will conserve energy and maintain indoor air quality. Amphenol Advanced SensorsInstallation Instructions 1. Before installing the sensor, note the direction of the airflow. 2. Drill/cut one 38.10 mm 1 hole. Punch/drill two 3.17 mm 1/8 holes for mounting screws. 3. Slide sensor into 38.10 mm 1 hole and secure with screws. 4. Connect the conduit and make necessary wire connections. 5. Install lid, and ensure it snaps into place. 24 A24 A24 AWWWGGG 24 V24 V24 VAAACCC Installation Drawing for T8041 and T8042 (T8042 Installation shown)