Data Sheet SM-10 Sound Meter The Amprobe SM-10 Sound Level Meter is designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and Quality Control in various environments. It offers two types of measurements: A and C weighting. The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94dB 1 kHz etc...). The SM-10 conforms to the IEC651 Type 2, ANSI S1.4 Type 2, and JISC1502 requirements for Sound Level Meters. Which means the SM-10 uses two different weighting filters required by the IEC 651 and ANSI S1.4 Type 2: the A-Weighting and the C-Weighting audio filtering. Designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and No hassle quality control in various environments. warranty A and C weightings for checking compliance with safety regulations as well as acoustic analysis No waiting. Measuring ranges: No shipping charges. A Weighting 30 ~130dB Our commitment to C Weighting 35~130dB high-quality products Frequency range: 31.5Hz~8KHz and customer service is demonstrated by Display with 0.1dB steps on a 4 digits LCD our industry exclusive Slow (1 sec) and fast (125ms) response settings to check No Hassle warranty. peak and average noise levels In the unlikely event that an Amprobe Test MAX/MIN recording Tool requires warranty service, any of our Data Hold to freeze reading on digital display local dealers are Accessories supplied: Carrying case, windscreen, user authorized to replace manual and 9V Battery it, on the spot. CE, designed to meet IEC651 Type2, ANSI S1.4 Type2 (note: 500 MSLP limit) Amprobe Test Tools www.Amprobe.comData Sheet SM-10 Sound Meter Specifications General Specifications Display 4 digits LCD Microphone 1/2 inch Electret condenser microphone Low Battery Indication Replace battery when LCD displays Power Supply 9V NEDA 1604, IEC 6F22, JIS 006P battery Power Life Approx. 50 hrs (alkaline Battery) Auto Power Off Approx. 5 min Environment Indoor operation, < 2000 m Temperature / Humidity Operation 5 C to 40 C (41F to 104F) < 80% RH Storage -10 C to 60 C (14F to 140F) < 70 %RH Dimension 200 x 55 x 38 mm (7.8 x 2.2 x 1.5 in) Weight 233g. (0.5 lb.) Including battery Electrical (Audio) Standard applied IEC 651 Type2, ANSI 1.4 Type 2 Dynamic range 50 dB Resolution 0.1 dB, Display Update: 0.5 sec. Time weighting FAST(125mS), SLOW(1 sec) Frequency range: 31.5 Hz to 8 kHz Measuring level range (Auto Range) A Weighting: 30 to 130 dB C Weighting: 35 to 130 dB Accuracy 1.5 dB Calibration cycle 1 year -EMC EN61326-1 This product complies with requirements of the following European Community Directives: 89/336/EEC (Electromagnetic Compatibility) and 73/23/EEC (Low Voltage) as amended by 93/68/EEC (CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity of the equip - ment may disturb the measurement circuit. Measuring instruments will also respond to unwanted sig- nals that may be present within the measurement circuit. Users should exercise care and take appropri- ate precautions to avoid misleading results when making measurements in the presence of electronic interference. Amprobe Test Tools Amprobe Test Tools Europe website: www.Amprobe.com Amprobe Test Tools Europe email: info amprobe.com Beha-Amprobe GmbH Everett, WA 98203 In den Engematten 14 Tel: 877-AMPROBE 79286 Glottertal, Germany 2008 Amprobe Test Tools. All rights reserved. Tel.: +49 (0) 7684 8009 - 0 7/2008 3358179 Rev A Amprobe Test Tools www.Amprobe.com