DG411/DG412/DG413 19-4728 Rev 7 9/08 Improved, Quad, SPST Analog Switches General Description New Features Plug-In Upgrade for Industry-Standard Maxims redesigned DG411/DG412/DG413 analog DG411/DG412/DG413 switches now feature low on-resistance matching between switches (3 max) and guaranteed on-resis- Improved R Match Between Channels DS(ON) tance flatness over the signal range (4 max). These (3 max) low on-resistance switches conduct equally well in Guaranteed R Over Signal Range (4) FLAT(ON) either direction. They guarantee low charge injection, Improved Charge Injection (10pC max) low power consumption, and an ESD tolerance of Improved Off-Leakage Current Over Temperature 2000V minimum per Method 3015.7. The new design (< 5nA at +85C) offers lower off-leakage current over temperature (less Withstand Electrostatic Discharge (2000V min) than 5nA at +85C). per Method 3015.7 The DG411/DG412/DG413 are quad, single-pole/sin- Existing Features gle-throw (SPST) analog switches. The DG411 is nor- Low R (35 max) DS(ON) mally closed (NC), and the DG412 is normally open Single-Supply Operation +10V to +30V (NO). The DG413 has two NC switches and two NO switches. Switching times are less than 150ns max for Bipolar-Supply Operation 4.5V to 20V t and less than 100ns max for t . These devices ON OFF Low Power Consumption (35W max) operate from a single +10V to +30V supply, or bipolar Rail-to-Rail Signal Handling 4.5V to 20V supplies. Maxims improved TTL/CMOS-Logic Compatible DG411/DG412/DG413 are fabricated with a 44V silicon- gate process. Ordering Information Applications PART TEMP RANGE PIN-PACKAGE Sample-and-Hold Circuits Communication Systems DG411CJ 0C to +70C 16 Plastic DIP Test Equipment Battery-Operated Systems DG411CUE 0C to +70C 16 TSSOP Heads-Up Displays PBX, PABX DG411EUE -40C to +85C 16 TSSOP Guidance & Control Systems Audio Signal Routing DG411CY 0C to +70C 16 Narrow SO Military Radios DG411C/D 0C to +70C Dice Ordering Information continued at end of data sheet. Contact factory for dice specifications. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW IN1 1 16 IN1 1 16 IN2 IN1 1 16 IN2 IN2 D1 2 15 D2 2 2 D1 15 D2 D1 15 D2 S1 3 14 S2 S1 3 14 S2 S1 3 14 S2 V- V- V- 4 13 V+ 4 13 V+ 4 13 V+ 5 DG411 12 V 5 DG412 5 DG413 GND L GND 12 V GND 12 V L L S4 6 11 S3 6 11 S3 6 11 S3 S4 S4 7 10 D3 7 10 7 10 D4 D4 D3 D4 D3 IN4 8 9 IN3 8 9 IN3 8 9 IN3 IN4 IN4 DIP/SO/TSSOP DIP/SO/TSSOP DIP/SO/TSSOP DG411 DG412 DG413 SWITCHES SWITCHES LOGIC SWITCH LOGIC SWITCH LOGIC 1, 4 2, 3 0 ON 0 OFF 0 OFF ON OFF ON 1 1 1 ON OFF SWITCHES SHOWN FOR LOGIC 0 INPUT Pin Configurations and Functional Diagrams continued at end of data sheet. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.Improved, Quad, SPST Analog Switches ABSOLUTE MAXIMUM RATINGS (All Voltages Referenced to V-.) = +70C) Continuous Power Dissipation (T A V+.........................................................................................44V 16-Pin Plastic DIP (derate 10.53mW/C above +70C) .842mW GND .....................................................................................25V 16-Pin Narrow SO (derate 8.70mW/C above +70C) ...696mW V .....................................................(GND -0.3V) to (V+ +0.3V) 16-Pin CERDIP (derate 10.00mW/C above +70C)......800mW L Digital Inputs, V , V (Note 1)........(V- -2V) to (V+ +2V) or 30mA 16-Pin TSSOP (derate 6.7mW/C above +70C) ...........457mW S D (whichever occurs first) 16-Pin QFN (derate 19.2mW/C above +70C) ...........1538mW Continuous Current (any terminal)......................................30mA Operating Temperature Ranges Peak Current DG41 C ..............................................................0C to +70C (pulsed at 1ms, 10% duty cycle max) ............................100mA DG41 D ...........................................................-40C to +85C DG41 AK .......................................................-55C to +125C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current rating. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICSDual Supplies (V+ = 15V, V- = -15V, V = 5V, V = 0V, V = 2.4V, V = 0.8V, T = T to T , unless otherwise noted.) L GND INH INL A MIN MAX MIN TYP MAX PARAMETER SYMBOL CONDITIONS UNITS (Note 2) SWITCH Analog Signal Range V (Note 3) -15 15 V ANALOG V+ = 13.5V, C, D 17 45 T = +25C A Drain-Source V- = -13.5V, R A 17 30 DS(ON) On-Resistance V = 8.5V, D T = T to T 45 I = -10mA A MIN MAX S On-Resistance V+ = 15V, V- = -15V, T = +25C 3 A Match Between Channels R V = 10V, DS(ON) D T = T to T 5 (Note 4) I = -10mA A MIN MAX S V+ = 15V, V- = -15V, T = +25C 4 A On-Resistance Flatness R V = 5V, 0V, FLAT(ON) D (Note 4) T = T to T 6 I = -10mA A MIN MAX S V+ = 16.5V, T = +25C C, D, A -0.25 -0.10 0.25 A Source Off-Leakage Current V- = -16.5V, I C, D -5 5 nA S(OFF) T = T to A MIN (Note 7) V = 15.5V, D T MAX V = 15.5V S A -10 10 V+ = 16.5V, T = +25C C, D, A -0.25 -0.10 0.25 A Drain Off-Leakage Current V- = -16.5V, I C, D -5 5 nA D(OFF) T = T to A MIN (Note 7) V = 15.5V, D T MAX A -10 10 V = 15.5V S I V+ = 16.5V, T = +25C C, D, A -0.4 -0.1 0.4 D(ON) A Drain On-Leakage Current V- = -16.5V, + C, D -20 20 nA T = T to A MIN (Note 7) I V = 15.5V, S(ON) D T MAX V = 15.5V A -40 40 S 2 DG411/DG412/DG413