CMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 a Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 FEATURES FUNCTIONAL BLOCK DIAGRAMS +1.8 V to +5.5 V Single Supply 2.5 V Dual Supply ADG706 ADG707 2.5 ON Resistance S1 S1A 0.5 ON Resistance Flatness DA 100 pA Leakage Currents S8A 40 ns Switching Times Single 16-to-1 Multiplexer ADG706 D Differential 8-to-1 Multiplexer ADG707 S1B 28-Lead TSSOP Package DB Low-Power Consumption S16 S8B TTL/CMOS-Compatible Inputs 1-OF-8 1-OF-16 DECODER APPLICATIONS DECODER Data Acquisition Systems Communication Systems A0 A1 A2 A3 EN A0 A1 A2 EN Relay Replacement Audio and Video Switching Battery-Powered Systems GENERAL DESCRIPTION PRODUCT HIGHLIGHTS The ADG706 and ADG707 are low-voltage, CMOS analog 1. Single-/dual-supply operation. The ADG706 and ADG707 are multiplexers comprising 16 single channels and eight differential fully specified and guaranteed with 3 V and 5 V single-supply channels, respectively. The ADG706 switches one of 16 inputs and 2.5 V dual-supply rails. (S1S16) to a common output, D, as determined by the 4-bit 2. Low ON resistance (2.5 typical) binary address lines A0, A1, A2, and A3. The ADG707 switches 3. Low-power consumption (<0.01 W) one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2. 4. Guaranteed break-before-make switching action An EN input on both devices is used to enable or disable the 5. Small 28-lead TSSOP package device. When disabled, all channels are switched OFF. Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG706 and ADG707 ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switch- ing channels. These devices are also designed to operate from a dual supply of 2.5 V. These multiplexers are designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed, very low ON resistance, and leakage currents. ON resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies. The ADG706 and ADG707 are available in small 28-lead TSSOP packages. REV. B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. use, nor for any infringements of patents or other rights of third parties that Tel: 781/329-4700 www.analog.com may result from its use. No license is granted by implication or otherwise Fax: 781/326-8703 Analog Devices, Inc., 2002 -2016 under any patent or patent rights of Analog Devices.1 (V = 5 V 10%, V = 0 V, GND = 0 V, unless otherwise noted.) ADG706/ADG707SPECIFICATIONS DD SS 40 C Parameter 25 C to +85 C Unit Test Conditions/Comments ANALOG SWITCH Analog Signal Range 0 V to V V DD ON Resistance (R ) 2.5 typ V = 0 V to V , I = 10 mA ON S DD DS 4.5 5 max Test Circuit 1 ON Resistance Match Between 0.3 typ V = 0 V to V I = 10 mA S DD, DS Channels ( R ) 0.8 max ON ON Resistance Flatness (R ) 0.5 typ V = 0 V to V , I = 10 mA FLAT(ON) S DD DS 1.2 max LEAKAGE CURRENTS V = 5.5 V DD Source OFF Leakage I (OFF) 0.01 nA typ V = 4.5 V/1 V, V = 1 V/4.5 V S D S 0.1 0.3 nA max Test Circuit 2 Drain OFF Leakage I (OFF) 0.01 nA typ V = 4.5 V/1 V, V = 1 V/4.5 V D D S ADG706 0.4 1.5 nA max Test Circuit 3 ADG707 0.2 1nA max Channel ON Leakage I , I (ON) 0.01 nA typ V = V = 1 V, or 4.5 V D S D S ADG706 0.4 1.5 nA max Test Circuit 4 ADG707 0.2 1nA max DIGITAL INPUTS Input High Voltage, V 2.4 V min INH Input Low Voltage, V 0.8 V max INL Input Current I or I 0.005 A typ V = V or V INL INH IN INL INH 0.1 A max C , Digital Input Capacitance 5 pF typ IN 2 DYNAMIC CHARACTERISTICS t 40 ns typ R = 300 , C = 35 pF, Test Circuit 5 TRANSITION L L 60 ns max V = 3 V/0 V, V = 0 V/3 V S1 S16 Break-Before-Make Time Delay, t 30 ns typ R = 300 , C = 35 pF D L L 1 ns min V = 3 V, Test Circuit 6 S t (EN) 32 ns typ R = 300 , C = 35 pF ON L L 50 ns max V = 3 V, Test Circuit 7 S t (EN) 10 ns typ R = 300 , C = 35 pF OFF L L 14 ns max V = 3 V, Test Circuit 7 S Charge Injection 5pC typ V = 1 V, R = 0 , C = 1 nF S S L Test Circuit 8 OFF Isolation 60 dB typ R = 50 , C = 5 pF, f = 10 MHz L L 80 dB typ R = 50 , C = 5 pF, f = 1 MHz L L Test Circuit 9 Channel-to-Channel Crosstalk 60 dB typ R = 50 , C = 5 pF, f = 10 MHz L L 80 dB typ R = 50 , C = 5 pF, f = 1 MHz L L Test Circuit 10 3 dB Bandwidth ADG706 25 MHz typ R = 50 , C = 5 pF, Test Circuit 9 L L ADG707 36 MHz typ R = 50 , C = 5 pF, Test Circuit 9 L L C (OFF) 13 pF typ f = 1 MHz S C (OFF) D ADG706 180 pF typ f = 1 MHz ADG707 90 pF typ f = 1 MHz C , C (ON) D S ADG706 200 pF typ f = 1 MHz ADG707 100 pF typ f = 1 MHz POWER REQUIREMENTS V = 5.5 V DD I 0.001 A typ Digital Inputs = 0 V or 5.5 V DD 1.0 A max NOTES 1 Temperature range is 40C to +85C. 2 Guaranteed by design, not subject to production test. Specifications subject to change without notice. 2 REV. B