DG406/DG407 19-4729 Rev 6 3/10 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers General Description Features Pin-Compatible Plug-In Upgrade for Industry Maxims redesigned DG406 and DG407 CMOS analog Standard DG406/DG407 multiplexers now feature guaranteed matching between channels (8, max) and flatness over the specified sig- Guaranteed Matching Between Channels, 8 (max) nal range (9, max). These low on-resistance muxes Guaranteed On-Resistance Flatness, 9 (max) (100, max) conduct equally well in either direction and Guaranteed Low Charge Injection, 15pC (max) feature guaranteed low charge injection (15pC, max). In Low On-Resistance 100 (max) addition, these new muxes offer low input off-leakage Input Leakage, 5nA (max) at +85C current over temperatureless than 5nA at +85C. Low Power Consumption, 1.25mW (max) The DG406 is a 1 of 16 multiplexer/demultiplexer and Rail-to-Rail Signal Handling the DG407 is a dual 8-channel multiplexer/demultiplex- er. Both muxes operate with a +5V to +30V single sup- Digital Input Controls TTL/CMOS Compatible ply and with 4.5V to 20V dual supplies. ESD ESD Protection >2000V per Method 3015.7 protection is guaranteed to be greater than 2000V per Method 3015.7 of MIL-STD 883. These improved muxes Ordering Information are pin-compatible plug-in upgrades for the industry PART TEMP RANGE PIN-PACKAGE standard DG406 and DG407. DG406CJ+ 0C to +70C 28 Plastic DIP Applications DG406CWI+ 0C to +70C 28 Wide SO DG406C/D 0C to +70C Dice* Sample-and-Hold Circuits DG406DJ+ -40C to +85C 28 Plastic DIP Test Equipment DG406EWI+ -40C to +85C 28 Wide SO Guidance and Control Systems DG406DN+ -40C to +85C 28 PLCC Communications Systems DG406AK+ -55C to +125C 28 CERDIP Data-Acquisition Systems DG406EUI+ -40C to +85C 28 TSSOP Ordering Information continued at end of data sheet. Audio Signal Routing *Contact factory for dice specifications. +Denotes a lead(Pb)-free/RoHS-compliant package. Pin Configurations Functional Diagrams TOP VIEW + V+ 1 D V+ V- GND 28 N.C. 2 27 V- S1 N.C. 3 26 S8 S2 S3 S16 4 25 S7 S4 S5 S15 5 24 S6 S6 DG406 S7 S14 6 23 S5 S8 D S13 7 22 S4 S9 S10 S12 8 21 S3 S11 S12 S11 9 20 S2 S13 S14 S10 19 10 S1 S15 S9 11 18 EN S16 GND 12 17 A0 CMOS DECODERS/DRIVERS N.C. 13 16 A1 A3 14 15 A2 A0 A1 A2 A3 EN DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER DIP/SO/TSSOP Pin Configurations continued at end of data sheet. Functional Diagrams continued at end of data sheet. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxims website at www.maxim-ic.com.Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS (Voltage Referenced to V-) 28-Pin CERDIP (derate 16.67mW/C above +70C)...1333mW V+ ............................................................................-0.3V, 44V 28-Pin TSSOP (derate 12.8mW/C above +70C) ......1025mW GND.........................................................................-0.3V, 25V Operating Temperature Ranges Digital Inputs, S, D (Note 1)....................(V- - 2V) to (V+ + 2V) or DG406/DG407C ...............................................0C to +70C 30mA (whichever occurs first) DG406/DG407D ............................................-40C to +85C Continuous Current (any terminal)......................................30mA DG406/DG407AK ..........................................-55C to +125C Peak Current, S or D Storage Temperature Range .............................-65C to +150C (pulsed at 1ms, 10% duty cycle max) ..........................100mA Lead Temperature (excluding dice soldering, 10s) .......+300C Continuous Power Dissipation (T = +70C) Soldering Temperature (reflow) A 28-Pin Plastic DIP (derate 9.09mW/C above +70C) ..727mW Plastic DIP, Wide SO, TSSOP ......................................+260C 28-Pin Wide SO (derate 12.50mW/C above +70C) ...1000mW PLCC............................................................................+245C 28-Pin PLCC (derate 10.53mW/C above +70C) ........842mW CERDIP, Dice...............................................................+240C Note 1: Signals on S , D , A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to max- imum current ratings. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICSDual Supplies (V+ = 15V, V- = -15V, V = 0V, V = +2.4V, V = +0.8V, T = T to T , unless otherwise noted.) GND AH AL A MIN MAX MIN TYP MAX PARAMETER SYMBOL CONDITIONS UNITS (Note 2) SWITCH Analog Signal Range V (Note 3) -15 +15 V ANALOG T = +25C 60 100 A I = -1.0mA, S Drain-Source On-Resistance R DS(ON) V = 10V D T = T to T 125 A MIN MAX T = +25C 1.5 8 On-Resistance Matching I = -1.0mA, A S R DS(ON) Between Channels V = 10V (Note 4) D T = T to T 10 A MIN MAX T = +25C 1.8 9 A I = -1.0mA, S On-Resistance Flatness R FLAT V = 5V or 0V D T = T to T 12 A MIN MAX T = +25C -0.5 +0.01 +0.5 A V = +10V, D Source-Off Leakage Current I V = 10V, C, D -5 +5 nA S(OFF) S T = T A MIN (Note 5) V = 0V EN to T MAX A -50 +50 T = +25C -1 +0.02 +1 A V = 10V, D V = +10V, DG406 C, D -40 +40 S T = T A MIN V = 0V EN to T MAX A -200 +200 Drain-Off Leakage Current I nA D(OFF) (Note 5) T = +25C -1 +0.02 +1 A V = +10V, D V = 10V, DG407 C, D -20 +20 S T = T A MIN V = 0V EN to T MAX A -100 +100 T = +25C -1 +0.02 +1 A V = 10V, DG406 C, D -40 +40 D T = T A MIN I V = 10V, D(ON) S to T MAX A -200 +200 Drain-On Leakage Current + sequence nA (Note 5) T = +25C -1 +0.02 +1 A I each switch S(ON) on DG407 C, D -20 +20 T = T A MIN to T MAX A -100 +100 2 DG406/DG407